Open-Die Forging Factory, Jiangyin, Jiangsu, China Tel 0086-189-2135-9659  |  Email sales@steelforgepieces.com
Jiangyin Jiangnan Metal Co., Ltd. Forged Rings / Flanges / Shafts / Discs Request a Quote
Home › Stainless Steel › X6NiCrSiNCe35-25

X6NiCrSiNCe35-25 (EN 1.4854 / UNS S35315 / Alloy 353 MA) Forgings

Seamless rolled rings, flanges, shafts, discs, sleeves and bars in the EN 10095 heat-resisting grade, forged to drawing by Jiangyin Jiangnan Metal Co., Ltd., Jiangsu, China.

Page updated 10 October 2026. Data taken from EN 10095 and published mill datasheets.

X6NiCrSiNCe35-25 is an austenitic heat-resisting steel to EN 10095, material number 1.4854, also designated UNS S35315 and sold as Alloy 353 MA. It carries 34 to 36 % nickel and 24 to 26 % chromium with nitrogen and cerium additions, resists scaling in air to roughly 1100 °C, and is specified for furnace and petrochemical hot-section parts.

Designations and equivalents

Table 1. Cross-reference for X6NiCrSiNCe35-25
SystemDesignation
EN nameX6NiCrSiNCe35-25
EN material number1.4854
UNSS35315
Trade nameAlloy 353 MA, originally Avesta 353 MA
Governing standardEN 10095, heat resisting steels and nickel alloys
ClassificationAustenitic heat-resisting steel, listed as a patented grade in EN 10095

Sources: Metalcor datasheet for 1.4854 / Alloy 353 MA; EN 10095 grade tables.

Chemical composition

The figures below are the EN 10095 specification ranges. Cerium and nitrogen are what separate this grade from plain 25Cr-35Ni material. Cerium improves adhesion of the chromium-oxide scale under thermal cycling, and nitrogen raises strength without the carbon levels that would otherwise be needed.

Table 2. Chemical composition of X6NiCrSiNCe35-25 (1.4854), % by mass
CSiMnPSCrNiNCeFe
0.04-0.081.20-2.00max 2.00max 0.040max 0.015 24.0-26.034.0-36.00.12-0.200.03-0.08Balance

Source: EN 10095 composition table for austenitic heat-resisting steels. Mill datasheets often quote narrower working ranges, for example C max 0.07, Si max 1.30 and N max 0.17 (Metalcor).

Mechanical properties at ambient temperature

Table 3. Minimum room-temperature properties, solution annealed, to BS EN 10095
PropertyMetricApproximate imperial
0.2 % proof strength Rp0.2min 300 N/mm²43,500 psi
1.0 % proof strength Rp1.0min 340 N/mm²49,300 psi
Tensile strength Rm650-850 N/mm²94,000-123,000 psi
Elongation Amin 40 %min 40 %
Hardnessmax 210 HB-
Modulus of elasticity190 kN/mm²27,600 ksi

Sources: British Stainless Steel Association tabulation of BS EN 10095; Metalcor 1.4854 datasheet for modulus and annealed hardness.

Physical properties at 20 C

Table 4. Physical data
PropertyValue
Density7.9 g/cm³ (0.285 lb/in³)
Thermal conductivity11 W/m·K
Specific heat capacity480 J/kg·K
Thermal expansion, 20 to 100 C16.6 µm/m·C
Electrical resistivityapprox 1 Ω·mm²/m

Sources: Metalcor 1.4854 datasheet; AZoM grade 353MA datasheet for thermal expansion.

Behaviour at high temperature

This grade is bought for hot service. Published data give resistance to scaling in air up to 1100 °C, with maximum service temperature in air quoted as high as 1150 °C, together with good creep rupture strength. That combination is why it appears in steam-cracking and radiant-tube equipment rather than in ambient-temperature structural work.

Check before specifying: continuous service below about 950 °C can reduce room-temperature impact toughness in this grade. Where a component dwells in or cycles through that band, confirm the embrittlement allowance with the design authority. Source: AZoM grade 353MA datasheet.

Typical applications for 1.4854 forgings

Petrochemical furnaces

Components for ethylene furnace radiant cracking tubes and EDC furnace tubes, where creep strength governs the design life.

Heat treatment plant

Furnace internals, retorts, muffles, radiant tube assemblies and fixtures held at temperature in continuous operation.

Metallurgical waste heat recovery

Tube and tube-sheet components in waste heat recovery systems used in the metallurgical industry.

Hot-section rotating and static parts

Rings, rolls, shafts and discs for equipment running above 550 C in iron and steel, non-ferrous, cement and energy plant.

Application sources: Alleima 353 MA product datasheet; Metalcor 1.4854 datasheet; AZoM grade 353MA datasheet.

Forged product forms in X6NiCrSiNCe35-25

Table 5. Product forms, made to drawing
FormNotes
Seamless rolled ringsRing rolled, plain or stepped section, rough or finish machined
Forged flangesWeld neck, slip-on, blind and special profiles to drawing or client standard
Round bars and shaftsForged, heat treated, peeled or turned
Discs and blanksUpset forged, trepanned where required
Sleeves, bushings, hollow barsBored and machined
Tube sheets and blocksOpen-die forged, drilled to pattern on request
Near-net open-die forgingsBespoke profiles, nozzles, valve bodies and stems

Manufacturing and quality route

Jiangyin Jiangnan Metal Co., Ltd. takes X6NiCrSiNCe35-25 from melted stock through forging, solution annealing, machining and inspection. Melting routes include EAF with AOD or VOD refining, and ESR remelt where the application or the client specification calls for improved cleanliness and homogeneity.

Heat treatment

Forgings are delivered solution annealed and rapidly cooled, which takes carbides into solution and gives the EN 10095 property minimums. The anneal cycle is set against section thickness and fixed with the customer where a specification dictates it.

Testing and certification

Ultrasonic examination is available to EN 10228-3, SEP 1921 or ASTM A388. Standard release is an EN 10204 3.1 mill certificate, with EN 10204 3.2 witnessed by a third-party inspectorate as an option. Chemical analysis, tensile and hardness testing, grain size, intergranular corrosion testing and PMI can be added to the inspection and test plan.

Comparison with other EN 10095 austenitic grades

Table 6. Room-temperature minimums for related austenitic heat-resisting steels, BS EN 10095
GradeNumberRp0.2 min N/mm²Rm N/mm²A % minHB max
X6NiCrSiNCe35-251.4854300650/85040210
X6CrNiSiNCe19-101.4818290600/80040210
X9CrNiSiNCe21-11-21.4835310650/85040210
X8CrNi25-211.4845210500/70035192
X12NiCrSi35-161.4864230550/75030223
X10NiCrSiNb35-221.4887270500/65040200

Source: British Stainless Steel Association, ambient temperature mechanical properties of heat resisting steels to BS EN 10095. The high nickel content of 1.4854 is aimed at carburising and thermal cycling resistance, not at room-temperature strength.

Frequently asked questions

What is X6NiCrSiNCe35-25?

An austenitic heat-resisting steel specified in EN 10095 under material number 1.4854, with 34 to 36 % nickel, 24 to 26 % chromium, nitrogen at 0.12 to 0.20 % and cerium at 0.03 to 0.08 %. It is sold commercially as Alloy 353 MA and listed in the UNS system as S35315.

Is this a corrosion-resistant alloy for seawater or acid duty?

No. It is a heat-resisting grade for oxidising, carburising and nitriding hot gas, not a wet-corrosion alloy for seawater, subsea pipework or sulphuric acid. For chloride or acid service the right families are duplex and super duplex such as A182 F51, F53 and F55, or nickel alloys such as 825, C-276 and 904L, all of which we also forge.

What is the maximum service temperature?

Datasheets give scaling resistance in air to about 1100 C, with maximum service in air quoted up to 1150 C. Service below 950 C may reduce room-temperature impact toughness, so the operating band matters as much as the peak figure.

Are X6NiCrSiNCe35-25, 1.4854, S35315 and 353 MA the same material?

Yes. They are the EN name, the EN material number, the UNS number and the trade name for the same 35Ni-25Cr steel alloyed with nitrogen and cerium.

Can it be welded?

Matching filler of the same 1.4854 composition is given as a suitable consumable in the Metalcor datasheet. Procedures should be qualified for the specific joint, section thickness and service temperature.

What do you need in order to quote?

The drawing, or rough dimensions: OD by ID by height for rings, diameter by length for bars and shafts. Add quantity, governing specification, delivery condition and any NDT or third-party inspection requirement. Email sales@steelforgepieces.com or call 0086-189-2135-9659.

Request a quotation

Jiangyin Jiangnan Metal Co., Ltd. is an open-die forging factory at No.1 Chengxiqiao Road, Zhouzhuang Town, Jiangyin City, Jiangsu Province, China. We forge X6NiCrSiNCe35-25 / 1.4854 / S35315 to drawing as rings, flanges, shafts, discs, sleeves and bars, released with EN 10204 3.1 or 3.2 certification.

Tel 0086-189-2135-9659  |  Email sales@steelforgepieces.com

AISI 330 | Incoloy 800H | Incoloy 800HT | Inconel 601 | Inconel 617 | Haynes 230 | Alloy 602 | Alloy 45TM | A286 | Sanicro 28