Jiangyin Jiangnan Metal Co., Ltd. · Open-die forging factory · Jiangsu, China · Est. 1997 +86 189 2135 9659 sales@steelforgepieces.com
Jiangnan MetalOpen-die forging · since 1997

Stainless steel grade · EN 1.4401 · UNS S31600 · AISI 316

1.4401 Forgings

X5CrNiMo17-12-2 forged rings, flanges, shafts, discs, tube sheets, bars and sleeves, melted and forged in one works

Jiangyin Jiangnan Metal Co., Ltd. melts, open-die forges, heat-treats, machines and certifies 1.4401 (X5CrNiMo17-12-2, UNS S31600, AISI 316) forgings at its own works in Jiangyin City, Jiangsu Province, China, and has done so since 1997. 1.4401 is a chromium–nickel–molybdenum austenitic stainless steel: the 2.00–2.50 % molybdenum is what separates it from 1.4301 / 304 and is what gives it its resistance to pitting in chloride-bearing and mildly acidic media. The steel is melted here in an electric arc furnace, refined in a ladle furnace and decarburised under vacuum in units of 30 t and 60 t, so the mill certificate traces a 1.4401 forging back to its own melt number rather than to a purchased billet.

  • OD 6,000 mmMax rolled ring
  • 30 tMax single piece
  • 10 kgMinimum order
  • 20–60 daysTypical lead time
  • EN 10204 3.1 / 3.2Certification
  • CCS BV DNV LR NKClass approvals

Send a drawing for quotation What to put in the enquiry

Technical page reviewed 22 September 2026 by the metallurgy department of Jiangyin Jiangnan Metal Co., Ltd. Data quoted from EN 10088-3, EN 10250-4, EN 10222-5, ASTM A182/A182M and ISO 15156-3.

§01

1.4401 at a glance

1.4401 is the EN material number for X5CrNiMo17-12-2, a molybdenum-alloyed austenitic stainless steel equivalent to AISI 316 and UNS S31600. It is supplied in the solution annealed condition, is non-magnetic as annealed, cannot be hardened by heat treatment, and is specified for forgings under EN 10250-4 (general engineering), EN 10222-5 (pressure purposes) and ASTM A182 grade F316 (piping components).

Table 1. 1.4401: designations, equivalents and the standards that govern forgings
EN material number1.4401
EN steel nameX5CrNiMo17-12-2
UNSS31600
AISI / ASTM type316
ASTM forging gradeASTM A182 F316 (flanges, fittings, valves); ASTM A473 and A965 for other forged shapes
JIS (Japan)SUS 316
GB/T (China)06Cr17Ni12Mo2 (formerly 0Cr17Ni12Mo2)
BS (UK)316S31
AFNOR (France)Z6CND17-11
SS (Sweden)2347
StructureAustenitic, non-magnetic in the solution annealed condition
Delivery conditionSolution annealed 1,020–1,120 °C, rapidly cooled (water quenched on heavy sections). ASTM A182 F316 requires a minimum of 1,040 °C with a liquid quench, so dual-certified forgings are annealed at 1,040–1,120 °C
Forging standardsEN 10250-4 (open die forgings, stainless steels), EN 10222-5 (forgings for pressure purposes), ASTM A182/A182M
Closest alternatives1.4404 / 316L (low carbon, for welded assemblies), 1.4436 (2.5–3.0 % Mo), 1.4571 / 316Ti (titanium stabilised)

Equivalences are for guidance. 1.4401 and ASTM A182 F316 are close but not identical: their carbon, chromium, molybdenum and nickel ranges differ, as Table 2 shows. Where a purchase order calls for both, the chemistry is aimed at the overlap of the two ranges. State this on the enquiry.

§02

Chemical composition of 1.4401

1.4401 contains 16.5–18.5 % chromium, 10.0–13.0 % nickel and 2.00–2.50 % molybdenum, with carbon held at 0.07 % maximum, the balance being iron. Chemistry is verified on the furnace at this works by optical emission spectrometry to ASTM E415 and by infrared carbon–sulphur analysis to ASTM E1019, then re-confirmed on the finished forging by positive material identification.

Table 2. Chemical composition, % by mass. EN 10088-3 for 1.4401 against ASTM A182/A182M grade F316
Element1.4401 (EN 10088-3)A182 F316 (UNS S31600)Why it is there
Carbon, C≤ 0.07≤ 0.08Kept low to limit chromium-carbide precipitation at grain boundaries
Silicon, Si≤ 1.00≤ 1.00Deoxidiser from the melt shop
Manganese, Mn≤ 2.00≤ 2.00Austenite stabiliser, sulphur control
Phosphorus, P≤ 0.045≤ 0.045Residual; harmful to hot ductility
Sulphur, S≤ 0.030≤ 0.030Residual; lowered by ladle refining when cleanness is specified
Nitrogen, N≤ 0.11≤ 0.10Raises strength and pitting resistance
Chromium, Cr16.5 – 18.516.0 – 18.0Forms the passive oxide film
Molybdenum, Mo2.00 – 2.502.00 – 3.00The defining addition: resistance to chloride pitting and crevice attack
Nickel, Ni10.0 – 13.010.0 – 14.0Holds the austenitic structure down to cryogenic temperatures
Iron, FeBalanceBalancen/a

A sulphur content at the low end of the range improves polishability and corrosion behaviour but reduces machinability; where free machining matters, agree the target S band at enquiry stage. Tighter internal chemistry windows than the table above can be melted to customer specification, because the steel is melted here rather than bought in.

§03

Mechanical properties of 1.4401 forgings

In the solution annealed condition, 1.4401 forgings meet a minimum 0.2 % proof strength of 200 MPa, a tensile strength of 500–700 MPa and an elongation of at least 40 % to EN 10088-3, or 205 MPa proof, 515 MPa minimum tensile and 30 % elongation to ASTM A182 F316. Properties are verified on a test piece representing the forging, tested on the 600 kN and 300 kN machines in the works laboratory to ASTM A370 and ISO 6892-1.

Table 3. Room-temperature mechanical properties, solution annealed, transverse or longitudinal test piece as agreed
PropertyEN 10088-3 / EN 10250-4ASTM A182 F316
Proof strength Rp0.2≥ 200 MPa (29 ksi)≥ 205 MPa (30 ksi)
Proof strength Rp1.0≥ 235 MPa (34 ksi)not specified
Tensile strength Rm500 – 700 MPa (73 – 102 ksi)≥ 515 MPa (75 ksi)
Elongation A≥ 40 % longitudinal (A5, gauge length 5d)≥ 30 % (gauge length 2 in. / 50 mm)
Reduction of area Ztypically ≥ 55 %≥ 50 %
Impact energy KV, +20 °C≥ 100 Jby agreement
Hardness≤ 215 HBnot specified by A182 (the A240 plate limit of 217 HBW is often quoted)
Typical as-delivered hardness150 – 190 HB on solution annealed forgings

Minimum values apply to the sizes covered by the relevant standard; on very heavy sections the test piece location and the quench path both matter, so agree the sampling position on the order. Elevated-temperature proof strength and, for pressure equipment, the values of EN 10222-5 are quoted on request.

1.4401 cannot be hardened by heat treatment. It is strengthened only by cold work, which also makes it slightly magnetic. Any request for a quenched-and-tempered condition, or for a hardness above about 215 HB, points to the wrong grade: a martensitic or precipitation-hardening stainless such as 1.4057 or 17-4 PH is normally the answer.

§04

Physical properties

1.4401 has a density of 8.0 g/cm³, a modulus of elasticity of 200 GPa, a thermal conductivity of 15 W/(m·K) and a mean coefficient of thermal expansion of 16.0 × 10⁻⁶ K⁻¹ between 20 and 100 °C. It is practically non-magnetic in the solution annealed condition.

Table 4. Physical properties of 1.4401 at 20 °C unless stated
PropertyMetricImperial
Density8.0 g/cm³0.289 lb/in³
Modulus of elasticity200 GPa29,000 ksi
Thermal conductivity15 W/(m·K)8.7 Btu/(h·ft·°F)
Specific heat capacity500 J/(kg·K)0.12 Btu/(lb·°F)
Electrical resistivity0.75 Ω·mm²/m (750 nΩ·m)29.5 µΩ·in
Mean thermal expansion, 20–100 °C16.0 × 10⁻⁶ K⁻¹8.9 × 10⁻⁶ /°F
Mean thermal expansion, 20–200 °C16.5 × 10⁻⁶ K⁻¹9.2 × 10⁻⁶ /°F
Magnetic permeability, annealed< 1.02 (practically non-magnetic; rises with cold work)
Scaling resistance in airto about 870 °C intermittent, 925 °C continuous

Thermal expansion of 1.4401 is about 40 % higher than that of carbon steel while its thermal conductivity is about a third of it. Both matter when a 1.4401 forging is bolted or welded to a carbon-steel structure that cycles in temperature, and when machining allowances are set.

§05

Corrosion behaviour, and where 1.4401 should not be used

The pitting resistance equivalent number (PREN = Cr + 3.3 Mo + 16 N) of 1.4401 falls between 23.1 and 28.5, which places it well above 1.4301 / 304 but well below duplex and super-austenitic grades. In practice 1.4401 handles most organic acids, dilute sulphuric acid at ambient temperature, phosphoric acid, sulphite liquors, foodstuffs, pharmaceutical process media and marine atmospheres.

  • Good service: chemical and petrochemical process streams, pulp and paper digesters and liquor systems, food and beverage plant, pharmaceutical and biochemical equipment, heat exchangers, marine atmospheric exposure.
  • Watch the temperature: chloride stress-corrosion cracking becomes a real risk above roughly 60 °C in chloride-bearing water, even at low chloride levels. Austenitic grades are susceptible; duplex grades are far less so.
  • Not suitable: seawater immersion, brine, hot chloride process streams and high-chloride produced water. For those, 1.4462 / SAF 2205, 1.4410 / SAF 2507, 904L or 254 SMO are the correct grades and are forged on the same presses here.
  • Welded assemblies: 1.4401 has a carbon limit of 0.07 %, high enough that slow cooling through 450–850 °C can sensitise the heat-affected zone. Where a forging will be welded into a fabrication and cannot be re-solution-annealed afterwards, specify 1.4404 / 316L instead.

Sour service. UNS S31600 is listed in ISO 15156-3 / NACE MR0175 for sour oil and gas service in the solution annealed condition with hardness capped at 22 HRC, and only within the environmental limits (H₂S partial pressure, chloride content and temperature) set out in that standard for austenitic stainless steels. State the sour-service envelope on the enquiry so the right grade and the right documentation are quoted.

Intergranular corrosion testing to ASTM A262 Practice E, and pitting tests to ASTM G48, are placed with an accredited third-party laboratory and reported alongside the mill certificate when the order calls for them.

§06

1.4401 compared with 1.4404, 1.4436, 1.4571 and 1.4462

The choice between 1.4401 and 1.4404 is decided by carbon content and welding, and the choice between 1.4401 and 1.4462 by chloride content and strength. The five grades below cover almost every enquiry that starts out as "316". The decision usually turns on one question: will the forging be welded, and how aggressive is the chloride environment?

Table 5. Choosing between 1.4401 and its neighbours
GradeEN nameC max %Mo %PRENChoose it when
1.4401 / 316X5CrNiMo17-12-20.072.0–2.523.1–28.5General Mo-bearing austenitic forging, no welding after delivery, or the forging is solution annealed after welding
1.4404 / 316LX2CrNiMo17-12-20.0302.0–2.523.1–28.5The forging will be welded into an assembly. Lower carbon avoids sensitisation of the heat-affected zone
1.4436X3CrNiMo17-13-30.052.5–3.024.8–30.2A step more pitting resistance is needed but duplex is not warranted
1.4571 / 316TiX6CrNiMoTi17-12-20.082.0–2.523.1–26.8Sustained service in the 450–850 °C range, where titanium stabilisation prevents carbide precipitation
1.4462 / 2205X2CrNiMoN22-5-30.0302.5–3.530.9–38.1Seawater, brine or hot chlorides, or where roughly double the proof strength of 1.4401 saves weight

PREN in this table is calculated as Cr + 3.3 Mo + 16 N from the composition limits of each grade; 1.4571 has no specified nitrogen, so its upper bound is set by chromium and molybdenum alone. Note that EN 10088-3 specifies the same mechanical minimums for 1.4401 and 1.4404. The strength difference between them appears only in ASTM terms, where A182 F316 requires 205 MPa proof and 515 MPa tensile against 170 MPa and 485 MPa for F316L. A dual-certified 1.4401 / 1.4404 forging, carbon held below 0.030 % and mechanical properties meeting the F316 minimums, is the usual way to satisfy a specification that names both. Because heats are melted on site, that is a chemistry decision at the furnace rather than a search for suitable stock.

§07

How a 1.4401 forging is made at this works

Jiangyin Jiangnan Metal melts 1.4401 by electric arc furnace with ladle refining and vacuum oxygen decarburisation in units of up to 60 t, forges it on presses of up to 6,300 tonnes or rolls it on a 6 m radial-axial ring mill, solution anneals it in one of 14 furnaces, machines it and tests it, all on one site. Most forging suppliers in China buy billet; here the process starts one step earlier, at the furnace.

1 · Melting and refining

Carbon is removed under vacuum in a VOD unit of 30 t or 60 t capacity after arc melting and ladle refining. That is the standard route for stainless and duplex grades, and the reason a low, tightly controlled carbon level is achievable in 1.4401. Where exceptional cleanness is specified, the ingot is remelted by protective-atmosphere electroslag remelting (3 t and 6 t furnaces).

2 · Forging or ring rolling

1.4401 is forged from about 1,150–1,250 °C and finished above roughly 925 °C; austenitic stainless steels work-harden rapidly, so the reduction schedule is planned to keep the piece hot enough to deform without tearing. Hydraulic open-die presses of 6,300 t, 4,000 t and 2,000 t cover cogging, upsetting and heavy discs; three radial-axial ring mills (6 m, 3 m and 1 m) roll seamless rings; five hammers from 750 kg to 5 t handle drawing out and small batch work.

3 · Solution annealing

Every 1.4401 forging is solution annealed at 1,020–1,120 °C, or at 1,040 °C and above where ASTM A182 F316 applies, then cooled rapidly and water quenched on heavy sections, to hold the carbides in solution and restore full corrosion resistance. Fourteen furnaces are available, including car-bottom chambers up to 8,000 × 2,000 × 2,000 mm and two 15 m well-type furnaces that let long shafts be quenched vertically without bending.

4 · Machining and inspection

Vertical lathes turn to Ø5,000 mm swing, horizontal lathes take shafts up to 14,000 mm between centres, and a CNC deep-hole drilling machine bores Ø1,600 × 10,000 mm. Forgings are supplied as-forged with allowance, proof-machined for volumetric inspection, or finish-machined to drawing.

§08

1.4401 product forms and size envelope

In 1.4401, this works rolls seamless rings from OD 50 mm to OD 6,000 mm, forges shafts up to 14,000 mm long and discs up to Ø5,000 mm, bores cylinders to Ø1,600 × 10,000 mm, and takes single pieces up to 30,000 kg with a minimum order of 10 kg.

Table 6. What can be forged in 1.4401 here, and what sets each limit
Product formSize envelopeLimit set by
Seamless rolled ringsOD 50 mm to OD 6,000 mm, rectangular or contoured section6 m radial-axial ring mill; smaller rings by upset-and-punch
Forged rings and gear-ring blanksSections outside the ring-mill envelopeUpset-and-punch route on the presses
Forged flangesWeld neck, blind, slip-on, socket weld, lap joint, orifice, long weld neck to ASME B16.5, B16.47, API 6APress and machining capacity
Forged shafts and spindlesUp to 14,000 mm turned length; stepped, gear, pinion and eccentric shaftsHorizontal lathe; 15 m well furnace for vertical quench
Discs, tube sheets and coversUp to Ø5,000 mm machined, supplied proof-machined for UTØ5,000 mm vertical turning lathe
Cylinders, sleeves, bushings and heavy-wall pipeBored to Ø1,600 × 10,000 mm from solidCNC deep-hole drilling machine
Round, flat and square bars, blocksFeedstock for machined valve bodies and toolingPress and hammer capacity
Valve and wellhead partsBodies, bonnets, stems, seat rings, spools, nozzles, manifoldsAPI 6A and NACE MR0175 / ISO 15156 requirements as specified
Single-piece weightUp to 30,000 kg (30 t); minimum order 10 kg with no minimum piece count60 t maximum heat size and the 6,300 t press
§09

Testing, non-destructive examination and certification

1.4401 forgings are released against a documented route: melt analysis, mechanical testing on a representative test piece, volumetric and surface non-destructive examination, dimensional inspection, then certification to EN 10204 3.1 as standard or EN 10204 3.2 witnessed by a third party on request.

Two points specific to austenitic stainless forgings. Ultrasonic testing of 1.4401 is carried out to EN 10228-4, the part of that standard written for austenitic and austenitic-ferritic steels, not EN 10228-3, which applies to ferritic and martensitic forgings. Where the order calls for them, ASTM A388 or SEP 1921 apply instead. And because 1.4401 is non-magnetic in the solution annealed condition, surface examination is by liquid penetrant to ASTM E165 or ISO 3452-1; magnetic particle inspection does not work on this grade.

Table 7. Test and certification scope
DisciplineMethod and standardWhere it is done
Chemical analysisOptical emission spectrometry, ASTM E415; carbon and sulphur by infrared, ASTM E1019In-house laboratory
Material verificationPositive material identification on the finished forgingIn-house
TensileASTM A370 / ISO 6892-1, on 600 kN and 300 kN machinesIn-house
ImpactCharpy V-notch, ASTM A370, to −60 °CIn-house (below −60 °C: accredited laboratory)
Ultrasonic testingEN 10228-4, ASTM A388, SEP 1921; acceptance class to orderIn-house
Surface NDELiquid penetrant, ASTM E165 / ISO 3452-1In-house
Grain size and microstructureASTM E112 metallographyIn-house
Intergranular corrosionASTM A262 Practice E, or ASTM G28Accredited third-party laboratory
Pitting resistanceASTM G48Accredited third-party laboratory
CertificationEN 10204 3.1 as standard; EN 10204 3.2 witnessed by BV, DNV, LR, SGS, TÜV or the customer's own inspectorIssued with the shipment
Class approvalsCCS, BV, DNV, LR, NKHeld by the works

Supporting records supplied with the forging: heat-treatment charts, NDT reports, dimensional reports and PMI records, all traceable to the melt number.

§10

Where 1.4401 forgings are used

1.4401 forgings are used for pressure-vessel flanges, heat-exchanger tube sheets, valve and pump components, shafts and rolls in chemical, petrochemical, pulp and paper, food, pharmaceutical, power and non-immersed marine equipment.

Table 8. Typical 1.4401 forged components by industry
IndustryComponents forged in 1.4401
Chemical & petrochemicalPressure-vessel flanges, heat-exchanger tube sheets and covers, nozzles, pump and valve bodies, piping components
Pulp & paperDigester and liquor-tank components, paper-machine rolls and shafts, recovery-system parts
Food, beverage & pharmaceuticalProcess equipment, storage vessel fittings, sanitary shafts, spindles and sleeves
Oil & gas (within the sour-service limits of ISO 15156)Valve bodies, bonnets, stems and seat rings, spools, manifolds, wellhead parts
Power & energyTurbine and compressor parts, gear blanks, casing flanges, tube sheets
Marine & offshore (atmospheric or non-immersed)Couplings, mooring hardware, deck equipment components, bushings and sleeves
Heavy machineryRolls, crane wheels, eccentric shafts, gear rings, slewing rings, press components

For continuous seawater immersion or hot chloride service, specify a duplex or super-austenitic grade instead; see §05.

§11

How to order 1.4401 forgings

Quotations for 1.4401 forgings are prepared from a drawing or a written specification and are normally returned within two working days; the minimum order is 10 kg with no minimum piece count, and lead time runs 20 to 60 days. Sending the six items below in the first email removes a round trip.

Table 9. What to include in a 1.4401 request for quotation
#ItemExample
1Grade and specification1.4401 to EN 10250-4, dual certified to ASTM A182 F316
2Dimensions, or a drawing (PDF, DWG, DXF, STEP)Ring OD 1,200 × ID 900 × H 260 mm
3Quantity and expected repeat volume12 pcs, about 4 × per year
4Delivery conditionSolution annealed, proof-machined
5Testing requirementsUT to EN 10228-4 class 3, PT to ASTM E165, ASTM A262 Practice E
6Certification and destination portEN 10204 3.2 witnessed by DNV · Rotterdam

Email the enquiry Call or WhatsApp +86 189 2135 9659

§12

Frequently asked questions about 1.4401

What is 1.4401 stainless steel?

1.4401 is the EN material number for X5CrNiMo17-12-2, a molybdenum-alloyed austenitic stainless steel containing 16.5–18.5 % chromium, 10.0–13.0 % nickel and 2.00–2.50 % molybdenum, with carbon limited to 0.07 %. It is the European equivalent of AISI 316 and UNS S31600. The molybdenum addition gives it markedly better resistance to chloride pitting and to dilute reducing acids than 1.4301 / 304, which is why it is the default grade for chemical, food, pharmaceutical and pulp-and-paper process equipment.

Is 1.4401 the same as 316?

1.4401 and AISI 316 are equivalent grades but not identical specifications. 1.4401 to EN 10088-3 allows 16.5–18.5 % Cr, 2.00–2.50 % Mo, 10.0–13.0 % Ni and 0.07 % C maximum; ASTM A182 grade F316 (UNS S31600) allows 16.0–18.0 % Cr, 2.00–3.00 % Mo, 10.0–14.0 % Ni and 0.08 % C maximum. A forging can be dual certified to both by aiming the melt chemistry at the overlap of the two ranges. State that requirement on the order.

What is the difference between 1.4401 and 1.4404?

Carbon. 1.4404 (X2CrNiMo17-12-2, 316L) limits carbon to 0.030 % against 0.07 % for 1.4401; the chromium, nickel and molybdenum ranges are the same. The lower carbon prevents chromium carbides forming at grain boundaries when the steel cools slowly through 450–850 °C, so 1.4404 is specified whenever the forging will be welded and cannot be solution annealed afterwards. EN 10088-3 specifies the same mechanical minimums for both grades; the strength difference appears only in ASTM terms, where A182 F316 requires 205 MPa proof and 515 MPa tensile against 170 MPa and 485 MPa for F316L. Where both are named, a dual-certified 1.4401 / 1.4404 forging satisfies the order.

Can 1.4401 be hardened by heat treatment?

No. 1.4401 is austenitic and cannot be hardened by quenching and tempering; it is supplied solution annealed at 1,020–1,120 °C, with 1,040 °C the minimum where ASTM A182 F316 applies, then rapidly cooled. Strength can only be raised by cold work, which also makes the steel slightly magnetic. Typical as-delivered hardness of a solution annealed 1.4401 forging is 150–190 HB, and EN 10088-3 caps it at 215 HB. If a drawing calls for a hardness above that, the application needs a martensitic or precipitation-hardening stainless steel rather than 1.4401.

Is 1.4401 suitable for seawater?

Not for continuous immersion. With a PREN of 23–28, 1.4401 resists marine atmospheres and splash-zone exposure but pits and suffers crevice attack in stagnant seawater, brine and hot chloride streams, and it becomes susceptible to chloride stress-corrosion cracking above roughly 60 °C. For those duties, specify 1.4462 / SAF 2205, 1.4410 / SAF 2507, 904L or 254 SMO, all of which are forged on the same equipment at this works.

What standards cover 1.4401 forgings?

EN 10250-4 covers open-die steel forgings in stainless steels for general engineering purposes; EN 10222-5 covers forgings for pressure purposes; ASTM A182/A182M grade F316 covers forged flanges, fittings and valve parts for piping; EN 10088-3 gives the chemical composition and the properties of the bar and semi-finished product. Certification follows EN 10204, at level 3.1 as standard or 3.2 with third-party witnessing.

How is a 1.4401 forging ultrasonically tested?

To EN 10228-4, the part of the standard written for austenitic and austenitic-ferritic stainless steel forgings, or to ASTM A388 or SEP 1921 where the order specifies them. The coarse and anisotropic grain structure of austenitic steel scatters sound, so the probe frequency, the acceptance class and the machining condition of the surface all need to be agreed before testing; forgings are normally proof-machined first. Surface examination is by liquid penetrant to ASTM E165 or ISO 3452-1, because 1.4401 is non-magnetic and magnetic particle inspection will not work on it.

What is the largest 1.4401 forging you can make?

Seamless rolled rings in 1.4401 go up to 6,000 mm outside diameter on the 6 m radial-axial ring mill, and the heaviest single forging is 30 tonnes, worked on hydraulic presses of 6,300 t, 4,000 t and 2,000 t. Downstream capacity sets the practical limits: heat-treatment chambers take work up to 8,000 × 2,000 × 2,000 mm, two 15 m well furnaces allow long shafts to be quenched vertically, vertical lathes machine to Ø5,000 mm swing, horizontal lathes to 14,000 mm, and the deep-hole drilling machine bores Ø1,600 × 10,000 mm.

What is the minimum order quantity and lead time for 1.4401 forgings?

The minimum order is 10 kg, with no minimum piece count, so a single small part is quotable and so is a one-off large ring. Lead time is normally 20 to 60 days from order confirmation: standard stainless grades such as 1.4401 sit at the lower end because they are melted, refined and forged without an intermediate remelting step. Third-party witnessed inspection to EN 10204 3.2 and corrosion testing placed with an outside laboratory both need scheduling, so flag them at enquiry stage.

Who forges 1.4401 in China?

Jiangyin Jiangnan Metal Co., Ltd. forges 1.4401 at No.1 Chengxiqiao Road, Zhouzhuang Town, Jiangyin City, Jiangsu Province, China. The works has operated since 1997, employs 460 people including 9 senior engineers, 32 intermediate engineers and 140 technicians, and is unusual among Chinese forging suppliers in melting its own steel: an electric arc furnace, ladle furnaces and vacuum oxygen decarburisation units feed presses of up to 6,300 t and a 6 m ring mill on the same site. It holds CCS, BV, DNV, LR and NK approvals and exports to North America, Europe, the Middle East and Asia-Pacific. Contact: +86 189 2135 9659, sales@steelforgepieces.com.

Contact the works

Sales & engineering

Jiangyin Jiangnan Metal Co., Ltd.
Open-die forging factory, integrated melting works
No.1 Chengxiqiao Road, Zhouzhuang Town,
Jiangyin City, Jiangsu Province, China
Telephone / WhatsApp / WeChat: +86 189 2135 9659
Email: sales@steelforgepieces.com
Business hours: Monday–Saturday, 08:00–17:30 China Standard Time (UTC+8)

Wuxi Shuofang International Airport is 30 km from the plant and Shanghai's airports are 160 km. Nearest export ports: Zhangjiagang and Shanghai. Customer audits, pre-shipment inspections and third-party witness testing are welcome. Please arrange visits by email in advance so an English-speaking engineer is available.

Document control

Datasheet 1.4401 / X5CrNiMo17-12-2, revision of 22 September 2026, issued by the metallurgy department of Jiangyin Jiangnan Metal Co., Ltd.
https://www.steelforgepieces.com/Stainless-Steel/1.4401.html

Property data on this page is quoted from EN 10088-3 (composition and properties), EN 10250-4 and EN 10222-5 (forgings), ASTM A182/A182M (forged piping components) and ISO 15156-3 / NACE MR0175 (sour service). Capability figures describe the equipment installed at the Jiangyin works. Values are given for guidance; the purchase order and the mill certificate govern. A plain-text version of this datasheet is at /Stainless-Steel/1.4401.md.