Monel K-500 Forging Parts

Monel K-500 Forging Parts

Jiangyin Jiangnan is one leading manufacturer of Monel K-500 forging parts from china.
As per the size of Monel K-500 Forging parts, the Maximum diameter that we could do is 6000mm, and the maximum length that we could do is 12000mm, The maximum weight that we could do is 30 tons
We use ESR+VIR or VIM+ESR+VAR methods to melt Monel K-500 ignot.
In order to make forging of Monel K-500 material, wwe have 1 tons,3 tons,6 tons,9 tons open die forging parts hammer and 4500 tons hydraulic press,35 tons of manipulators, maximum load of 100 tons heating furnaces, maximum load of 100 tons heat treatment furnaces?750x2000 mm max sawing machines.
Our Monel K-500 forged parts can be in the solution treated and heat treated as per the requirement of the clients
We could do rough or final machined of Monel K-500 forging part as per the drawing of the clients
The chemical compostion of monel K-500 forging parts is as follows
  C Si Mn P S Ni Mo Cu Ti Al Fe
Min           63   27 0.35 2.3  
Max 0.18 0.50 1.50   0.010     33 0.85 3.15 balance
The mechenical property of Monel K-500 forging parts is as follows:
Tensile Strength Min 135KSI Min 931MPA
Yield Strength Min 95KSI Min 655MPA
Elongation Min 20%  
Reduction Min35%  
The type of Monel K-500 forged parts that we could do is as follows:Monel K-500 forging shaft,forging bars,forging flanges,forging disc,forging tube sheets,forging gears,forging pipes,forging tubes,forging blocks,forging rings,rolled rings,forging sleeves and so on
Monel K-500 has Corrosion resistance in an extensive range of marine and chemical environments. From pure water to non-oxidising mineral acids, salts and alkalis
We have Metallurgical analysis, Tensile strength tester, Hardness tester, Altimeter, Scale Micrometer, pressure tester to inspect monel K-500 forging parts
Monel K-500 forging parts have wide use in widely used in Chlorinated solvents,Crude oil distillation towers,Feed water and steam generator tubing.,Brine heaters, sea water scrubbers in tanker inert gas systems.,Sulfuric acid and hydrofluoric acid alkylation plants.,Pickling bat heating coils.,Transfer piping from oil refinery crude columns.,Plant for the refining of uranium and isotope separation in the production of nuclear fuel.,Pumps and valves used in the manufacture of perchlorethylene, chlorinated plastics , Monoethanolamine (MEA) reboiling tube.Cladding for the upper areas of oil refinery crude columns.
Monel K-500 forging parts that are used in marine atmospheres and tidal waters resistance to chloride-containing environments
Monel K-500 forged parts that are used in Drilling and Well Building, pipelines and refineries
Monel K-500 forged part that are used in Crude petroleum stills ,De-aerating heaters,Boiler feed water heaters and other heat exchangers ,Valves, pumps, shafts, fittings, and fasteners,Industrial heat exchangers
Monel K-500 forging part that are used in processing units,mechanical equipment, crystalizer equipment
Monel K-500 forged parts that are used in Paper and Pulp Industries,Pharmaceutical & Biochemistry,Water Treatment Plants.
Monel K-500 is a precipitation-hardenable nickel-copper alloy, we kown how to forging it sucessfully.
As per UT test of monel K-500 Forging Parts: 100% ultrasonic test according to EN10228-3, SA388, Sep 1921  etc.
We produce Monel K-500 forged stainless steel parts as per the standard of ASTM B564
We can offer the third party inspection of monel K-500 forging parts, like ABS, SBS,BV,GL, CCS,etc.
We could supply material inspection report as per the requirement of clients ,suh as Chemical Composition Report, Mechanical Properties Report, UT Report, Heat Treatment Report, Dimensions Check Report
We could supply Monel K-500 forging steel material certificate as per the standard of EN10204-3.1 or EN10204-3.2 of third party
Except to produce Monel K-500 forging parts, we could also produce alloy K-500 forging parts,UNS NO5500 Forging part,2.4375 forged parts, and other similar grade of forged parts
We could also do other nickel alloy forging parts, such as Nickel 200, Nickel 201,Monel 400,Monel R-405,Monel K-500,Hastelloy C-22,Hastelloy X,Hastelloy C-4,Hastelloy B-2,Hastelloy C-276,Hastelloy C-2000,Hastelloy B, Nimonic 75,Nimonic 90,Nimonic 80A,Nimonic 105,Nimonic 901,Inconel 600,inconel 601,inconel 617, inconel 625,inconel 686,inconel 690,inconel 693,inconel 718, inconel 725,inconel X-750,incoloy 800,incoloy 800H,incoloy 800HT,Incoloy 825,Incoloy 926,Incoloy 890,Incoloy 925,Incoloy 901,Incoloy 945, Incoloy A-286,NI-SPAN-C Alloy 902,MP35N,MP159,Multimet N155,Haynes 230,Haynes 188,Haynes 25, Udimet 500,Rene 41,Waspalloy,Invar 36,Invar 42,Stellite 6B,Kovar alloy,
Any inquiry of Monel K-500 forging parts, please feel free to contact us. We are glad to quote the best price for every clients

Monel K-500 Forging Parts

Products Related to Monel K-500 Forging Parts

Similar with Monel K-500 Forging Parts
Monel K-500 Forged Bars Monel K-500 Forging Parts Monel K-500 Forging Rings Monel K-500 Forging Flanges Monel K-500 Forged Flanges Monel K-500 Forged Parts Monel K-500 Forging Bars Monel K-500 Forging Shafts Monel 400 Forging Shafts Monel 400 Forged Rings