Monel R-405 Forging Bars

Clicks:

Jiangyin Jiangnan is one leading manufacturer of Monel R-405 forging bars from china.
As per the size of Monel 400 Forging bars, the Maximum diameter that we could do is 1200mm, and the maximum length that we could do is 12000mm, The maximum weight that we could do is 30 tons
We use ESR+VIR or VIM+ESR+VAR methods to melt Monel R-405 ignot.
In order to make forging of Monel R-405 material, we have open die forging parts hammer and 4500 tons hydraulic press,35 tons of manipulators, maximum load of 100 tons heating furnaces, maximum load of 100 tons heat treatment furnaces�?750x2000 mm max sawing machines
Our Monel R-405 forged bars can be in the solution treated and heat treated as per the requirement of the clients
The chemical compostion of Monel R-405 forging bars is as follows

	C	Si	Mn	P	S	Ni	Mo	Cu	Ti	Al	Fe
Min					0.025	63		28
Max	0.30	0.50	2.00		0.060			34			balance

The mechenical property of Monel R-405 forging bars is as follows:

Tensile Strength	70-85KSI	483-588MPA
Yield Strength	25-40KSI	173MPA-276MPA
Elongation	Min 50%
Reduction

We could do rough or final machined of Monel R-405 forging bar as per the drawing of the clients
Monel R-405 forging bars are resistant to sea water and steam at high temperatures as well as to salt and caustic solutions
The type of Monel R-405 forging bars that we could do is as follows:
Monel R-405 forging flat bars,Monel R-405 forging round bars,Monel R-405 forging suqare bars and so on.
Monel R-405 forging bars have wide use in many industries, such as
Monel R-405 forging bars that are used in igh Pressure Pump,Plunger pump.Mud pump,Fracturing Pump ,filtration system,valves and so on
Monel R-405 forged bars that are used in Marine engineering,Chemical and hydrocarbon processing equipment,Gasoline and freshwater tanks ,Crude petroleum stills ,De-aerating heaters,Boiler feed water heaters and other heat exchangers ,Valves, pumps, shafts, fittings, and fasteners,Industrial heat exchangers
We have Metallurgical analysis, Tensile strength tester, Hardness tester, Altimeter, Scale Micrometer, pressure tester to inspect monel 400 forging bars
Monel R-405 is a nickel-copper alloy with a controlled amount of sulfur added to provide sulfide inclusions that act as chip breakers during machining, we kown how to forging it sucessfully.
Our Monel R-405 forging bars could be 100% UT test as per the forging parts UT Test standard of ASTM A 388 or EN10228.
We produce Monel R-405 forged stainless steel bars as per the standard of ASTM B564
We could supply Monel R-405 forging steel material certificate as per the standard of EN10204-3.1 or EN10204-3.2 of third party
Except to produce Monel R-405 forging bars, we could also produce alloy R-405 forging bars,UNS NO4405 Forging bar, and other similar grade of forged bars

We could also do other nickel alloy forging bars, such as ncoloy 800,incoloy 800H,incoloy 800HT,Incoloy 825,Incoloy 926,Incoloy 890,Incoloy 925,Incoloy 901,Incoloy 945, Incoloy A-286,NI-SPAN-C Alloy 902,MP35N,MP159,Multimet N155,Haynes 230,Haynes 188,Haynes 25, Udimet 500,Rene 41,Waspalloy,Invar 36,Invar 42,Stellite 6B,Kovar alloy,

Any inquiry of Monel R-405 forging bars, please feel free to contact us. We are glad to quote the best price for every clients