AISI 309H Forgings (UNS S30909 / 1.4833)
Seamless rolled rings, forged flanges, shafts, discs, bars, sleeves and tube sheets in heat-resistant 23Cr-13Ni stainless steel to ASTM A182 grade F309H.
309H at a glance
AISI 309H (UNS S30909) is the high-carbon version of the 309 family of austenitic heat-resistant stainless steels: 22.0 to 24.0 % Cr, 12.0 to 15.0 % Ni, carbon held between 0.04 and 0.10 %. That carbon range, against 0.08 % maximum for 309S, is what buys the grade its creep strength above roughly 1000 °F (537 °C).
Oxidation resistance runs to about 1900 °F (1038 °C) in non-cyclic service and drops to roughly 1850 °F (1010 °C) where thermal cycling is frequent. The grade is picked for hot service, not for wet corrosive duty.
Jiangyin Jiangnan Metal Co., Ltd. forges 309H to customer drawing at its works in Jiangyin, Jiangsu, China: rolled rings, flanges, shafts, discs, bars, hollow sections and tube sheets, supplied solution annealed with EN 10204 3.1 or 3.2 certification. Enquiries to sales@steelforgepieces.com or +86-189-2135-9659.
- UNS S30909
- ASTM / ASME A182 F309H
- W.Nr. 1.4833 family
- Rm 515 MPa min
- Rp0.2 205 MPa min
- Solution annealed 1100 to 1150 °C
1. What 309H is, and what it is not
AISI 309H is an austenitic heat-resisting chromium-nickel stainless steel. Inside the 309 family the grades differ only in carbon. Plain 309 permits up to 0.20 % C. 309S is capped at 0.08 % C so it fabricates and welds more easily. 309H is bracketed at 0.04 to 0.10 % C to lift creep strength. A single heat often satisfies both the 309S and the 309H limits, so dual-certified material is normal in the market.
Two corrections are worth making, because both errors are widespread on trading sites. 309H is not a niobium-stabilised grade; stabilisation with niobium belongs to 347 and to X7CrNiNb18-10, which are different materials. And 309H is not an aqueous corrosion grade. The carbon that helps creep performance works against wet corrosion resistance, and the alloy can suffer intergranular attack after long spells at temperature. Its 23 % chromium still leaves it more corrosion resistant than most competing heat-resistant alloys.
2. Chemical composition
| Element | A182 F309H (forgings) | A240 309H (plate) |
|---|---|---|
| Carbon, C | 0.04 to 0.10 | 0.04 to 0.10 |
| Chromium, Cr | 22.0 to 24.0 | 22.0 to 24.0 |
| Nickel, Ni | 12.0 to 15.0 | 12.0 to 15.0 |
| Manganese, Mn | 2.00 max | 2.00 max |
| Silicon, Si | 1.00 max | 0.75 max |
| Phosphorus, P | 0.045 max | 0.045 max |
| Sulphur, S | 0.030 max | 0.030 max |
| Iron, Fe | Balance | Balance |
Watch the silicon column. A182 F309H allows 1.00 % Si, the A240 plate grade 0.75 %. Order to one specification and name it on the drawing.
3. Mechanical properties to ASTM A182 F309H
| Property | Imperial | Metric |
|---|---|---|
| Tensile strength, min | 75 ksi | 515 MPa |
| Yield strength, 0.2 % offset, min | 30 ksi | 205 MPa |
| Elongation in 2 in. (50 mm) or 4D, min | 30 % | 30 % |
| Reduction of area, min | 50 % | 50 % |
These are specification minima, not typical results. Annealed product in this family commonly tests nearer 586 MPa tensile, 310 MPa yield, 50 % elongation, hardness up to about 202 HBN.
Physical properties
| Property | Value |
|---|---|
| Density | 7.89 g/cm³ (0.285 lb/in³) |
| Modulus of elasticity | 193 GPa (28.5 × 10⁶ psi) |
| Melting range | 1480 to 1530 °C (2500 to 2590 °F) |
| Specific heat, 0 to 100 °C | 502 J/kg·K |
| Thermal conductivity at 100 °C | 15.6 W/m·K |
| Electrical resistivity at 20 °C | 78 µΩ·cm |
4. Creep data and temperature limits
Creep is the whole reason the H grade exists, so the figures belong here rather than in a brochure. The values below are published typical creep strain and creep rupture stresses for the 309 family.
| Temperature | Creep strain | Creep rupture | ||||
|---|---|---|---|---|---|---|
| 1 000 h | 10 000 h | 100 000 h | 1 000 h | 10 000 h | 100 000 h | |
| 600 °C / 1112 °F | 120 | 80 | 40 | 190 | 120 | 65 |
| 700 °C / 1292 °F | 50 | 25 | 20 | 75 | 36 | 16 |
| 800 °C / 1472 °F | 20 | 10 | 8 | 35 | 18 | 7.5 |
| 900 °C / 1652 °F | 8 | 4 | 3 | 15 | 8.5 | 3 |
| 1000 °C / 1832 °F | 4 | 2.5 | 1.5 | 8 | 4 | 1.5 |
| Condition | Limit |
|---|---|
| Non-cyclic service | 1038 °C (1900 °F) |
| Frequent thermal cycling | approx. 1010 °C (1850 °F) |
Sulphur-bearing, nitriding and carburising atmospheres all pull these limits down, and the alloy is not recommended for strongly carburising service. For those conditions ask us about Alloy 600 or Alloy 800H instead, and send the gas analysis with the enquiry.
5. Heat treatment, forging and machining
Solution annealing
309H forgings leave the works solution annealed at 1100 to 1150 °C (2012 to 2102 °F) and cooled rapidly. The same cycle is used to recover toughness after work or service in the 650 to 950 °C band, where sigma phase forms.
Hot forging
Heat through and work between 950 and 1200 °C (1742 to 2192 °F). Finish with an anneal at 1000 to 1150 °C and a rapid quench.
Cold forming, machining, welding
In the annealed condition the alloy forms much like 316, but it work-hardens fast, so machining wants rigid set-ups, positive feeds, sharp tools and plenty of coolant. Avoid heavy cold work on parts that will live at temperature, since carbide and sigma precipitation follow. Welding runs well by TIG, plasma, MIG, SMAW, SAW and FCAW. Where as-welded corrosion resistance matters, specify 309S rather than 309H.
6. Equivalent grades and designations
| System | Designation |
|---|---|
| AISI / trade name | 309H, AISI 309H, Alloy 309H |
| UNS | S30909 |
| Forgings | ASTM A182 F309H, ASME SA182 F309H |
| Plate | ASTM A240 309H, ASME SA240 309H |
| EN / Werkstoff, family | 1.4833, X12CrNi23-13 |
Cross-references are guidance only. EN 1.4833 covers the 309 / 309S / 309H family but its chemistry limits are not identical to the ASTM grades.
7. 309H forged products we make
This is an open-die shop, so 309H parts are forged to drawing rather than pulled from a catalogue. Usual shapes:
Seamless rolled rings
Ring-rolled 309H rings and retaining rings for furnace and kiln work.
Forged flanges
Weld neck, slip-on, blind, special flanges and flange blanks.
Shafts and spindles
Step shafts, eccentric shafts, fan shafts for hot service.
Discs and blanks
Forged discs, upset discs, machined blanks.
Round bars
Forged and rough-turned bar in heavy sections.
Sleeves and hollow bar
Bored sleeves, bushings, hollow forgings.
Tubes and tube sheets
Forged tube blanks, tube sheets, exchanger parts.
Valve components
Bodies, bonnets, seat rings, stems, blocks.
Nozzles and specials
Nozzles, manifolds, forging rolls, bespoke open-die shapes.
Where 309H forgings are used
Since the grade is bought for creep strength rather than wet corrosion resistance, it turns up wherever parts sit hot for years: furnace burners, doors, fans, piping and recuperators; fluidised-bed grids, piping and wind boxes; muffles, retorts, annealing boxes, salt pots and walking beams in thermal processing; catalytic recovery systems in refining; pulverised-coal burners and tube hangers in power generation; paper-mill equipment; incinerators, rotary kilns and calciners in waste treatment.
8. Melting, testing and certification
Our own practice on 309H forgings.
- Melting routes: EAF plus VOD, with ESR remelt where the enquiry calls for it.
- Delivery condition: solution annealed at 1100 to 1150 °C, as-forged or rough machined to drawing.
- Ultrasonic testing to EN 10228-3, SEP 1921 or ASTM A388 acceptance classes as ordered.
- Further NDT on request: PT and MT, chemical analysis, mechanical testing, grain size.
- Certification: EN 10204 3.1 mill certificate, or EN 10204 3.2 witnessed by a third party.
If the job falls under a pressure-equipment code or needs a named approval, say so at enquiry stage so the right route and paperwork are priced from the start.
9. Questions we are asked about 309H
What is the difference between 309H and 309S?
Carbon. 309S is 0.08 % maximum, 309H is 0.04 to 0.10 %. The higher, controlled carbon in 309H raises creep strength at temperature, while 309S fabricates more easily and behaves better after welding. Chromium and nickel are the same in both, and one heat can often be certified to both grades.
Can 309H replace 310S?
Not as a straight swap. 310S carries roughly 25 % Cr and 20 % Ni against 23 % Cr and 13.5 % Ni in 309H, so 310S holds up better at the top of the range. 309H is chosen where creep strength at moderate to high temperature is the requirement and the lower nickel content helps the price. Send us the atmosphere, temperature and stress and we will go through it with you.
What temperature can 309H take?
About 1038 °C (1900 °F) for oxidation resistance in steady service, near 1850 °F (1010 °C) with frequent cycling, and less again in sulphur-bearing, nitriding or carburising gas. See section 4.
Is 309H magnetic?
Essentially non-magnetic as solution annealed. Cold work can raise a slight magnetic response, as it does in other austenitic stainless steels.
What sizes can you forge?
It depends on press and ring-mill capacity for the particular shape, so send the drawing or the finished dimensions and weight to sales@steelforgepieces.com. We will come back on feasibility, forging weight and price.
How do I place an order?
Send a drawing or finished dimensions, the governing specification such as ASTM A182 F309H, quantity, required NDT and certification level, and the delivery destination. Jiangyin Jiangnan Metal Co., Ltd., sales@steelforgepieces.com, +86-189-2135-9659.
10. Related grades
Buyers comparing 309H usually also look at A182 F309, A182 F347, A182 F321, AISI 330, Incoloy 800H and Incoloy 800HT.
References
- Sandmeyer Steel Company, specification sheet for Alloy 309 / 309S / 309H, UNS S30900, S30908, S30909, W.Nr. 1.4833: composition, creep values, physical properties, temperature limits, fabrication data.
- Boltport, ASTM A182 F309H chemical composition and mechanical property table.
- ASTM A182 / ASME SA182 and ASTM A240 / ASME SA240, current editions.
Reviewed 30 September 2026 by the technical sales department, Jiangyin Jiangnan Metal Co., Ltd. Figures are given to support material selection and are not a warranty of fitness for a particular purpose. Design to the governing code and confirm the ordering specification. A plain-text version of this data sheet is available at AISI-309H.md.