Jiangyin Jiangnan Metal Co., Ltd. No.1 Chengxiqiao Road, Zhouzhuang Town, Jiangyin, Jiangsu, China +86 189 2135 9659 sales@steelforgepieces.com
Jiangyin Jiangnan Metal Co., Ltd. Open-Die Forging Factory

Super-austenitic stainless steel forgings

1.4565 Forgings

EN 1.4565 (UNS S34565, Alloy 24) is a nitrogen-alloyed austenitic stainless steel with a pitting resistance equivalent number of 47, against 24 for 316L. Jiangyin Jiangnan Metal Co., Ltd. supplies it as open-die forged rings, flanges, bars, discs, shafts and sleeves for seawater, flue gas desulphurisation and chemical process equipment.

Send your drawing for a quote

Grade designations
EN material no.
1.4565
EN steel name
X2CrNiMnMoNbN25-18-5-4
X2CrNiMnMoN25-18-6-5
UNS
S34565
ASTM forgings
A182 Gr. F49
ASTM plate
A240 S34565
Trade names
Alloy 24, 4565 S
Standards
EN 10088-2/-3, SEW 400,
ASTM A182 / A240 / A479
Structure
Austenitic, non-magnetic
  • 47PREN (Cr + 3.3Mo + 16N)
  • 415Rp0.2 min, MPa (60 ksi)
  • 795Rm min, MPa (115 ksi)
  • 4–5%Molybdenum
  • 0.30–0.60%Nitrogen
  • 8.0Density, g/cm³

What is 1.4565 stainless steel?

1.4565 is a nitrogen-alloyed, fully austenitic stainless steel containing 24 to 26 % chromium, 16 to 19 % nickel, 4 to 5 % molybdenum, 5 to 7 % manganese and 0.30 to 0.60 % nitrogen. Other designations for the same grade are UNS S34565, Alloy 24, ASTM A182 grade F49 and X2CrNiMnMoNbN25-18-5-4. The nitrogen content gives a PREN of 47 and a proof strength of at least 415 MPa, approximately twice the proof strength of annealed 316L.

Jiangyin Jiangnan Metal Co., Ltd. is an open-die forging factory in Jiangyin, Jiangsu, China. We forge 1.4565 to customer drawing as rings, flanges, bars, discs, shafts, sleeves and tube sheets, solution annealed, with EN 10204 3.1 or 3.2 certification.

Manganese is added to raise the solubility of nitrogen in austenite. Without it the grade could not hold 0.30 to 0.60 % nitrogen in solid solution without porosity or nitride precipitation. The nitrogen strengthens the matrix by solid solution hardening, and carries a factor of 16 in the PREN equation, so it contributes more to chloride pitting resistance per unit weight than chromium or molybdenum.

1.4565 combines the corrosion resistance of a 6 Mo super-austenitic grade with a proof strength close to duplex levels while remaining fully austenitic. It retains austenitic toughness at cryogenic temperature and is not subject to 475 °C embrittlement. For a given design pressure the wall thickness can often be reduced relative to 316L or 904L, which offsets part of the alloy cost.

1.4565 / S34565 is a distinct grade. It is not interchangeable with UNS S31254 (1.4547), UNS N08926 (1.4529) or UNS N08031 (Alloy 31), although all four are sometimes described as 6 Mo or super-austenitic. State the full designation on the purchase order, for example EN 1.4565 / UNS S34565, ASTM A182 F49.

Chemical composition of 1.4565

The values below follow EN 10088-2 and ASTM A240 for UNS S34565. The original SEW 400 listing for 1.4565 uses wider bands for manganese, chromium and molybdenum. State which standard applies when ordering, because the achievable PREN depends on it.

Chemical composition of EN 1.4565 / UNS S34565, weight %
ElementCSiMnPSCrNiMoNNbFe
EN 10088-2 /
ASTM A240
≤ 0.030 ≤ 1.00 5.00–7.00 ≤ 0.030 ≤ 0.015 24.0–26.0 16.0–19.0 4.00–5.00 0.30–0.60 ≤ 0.15 Balance
SEW 400
(older DIN)
≤ 0.030 ≤ 1.00 3.5–6.5 ≤ 0.030 ≤ 0.015 23.0–26.0 16.0–19.0 3.0–5.0 0.30–0.60 ≤ 0.15 Balance

Melted by AOD refining or vacuum induction melting, with vacuum arc remelting (VAR) or electroslag remelting (ESR) where the specification or the section size requires it.

Mechanical properties of 1.4565

Values apply to the solution annealed and water quenched condition at room temperature. 1.4565 cannot be hardened by heat treatment. Its strength comes from nitrogen in solid solution and, where the specification permits, from cold work.

Room-temperature mechanical properties, solution annealed
PropertyMetricImperialBasis
Tensile strength Rm≥ 795 MPa≥ 115 ksiASTM A240 / A182
Proof strength Rp0.2≥ 415 MPa≥ 60 ksiASTM A240 / A182
Proof strength Rp0.2≥ 420 MPa≥ 61 ksiEN 10088-2
Proof strength Rp1.0≥ 460 MPa≥ 67 ksiEN 10088-2
Elongation A5≥ 35 %≥ 35 %ASTM A240
Elongation, heavy forged sections≥ 30 %≥ 30 %Commonly agreed
Hardness≤ 241 HB≤ 100 HRBASTM A240
Impact energy KV at −196 °Ctyp. ≥ 100 Jtyp. ≥ 74 ft·lbOn agreement

Heavy forged sections are tested after solution annealing, on the finished part or on a sacrificial test prolongation as the purchase specification requires. Confirm acceptance values against the governing standard edition before placing the order.

Physical properties of 1.4565

Typical physical properties at 20 °C
PropertyTypical value
Density8.0 g/cm³ (0.289 lb/in³)
Modulus of elasticity190 GPa (27.6 × 10³ ksi)
Thermal conductivity11.5 W/(m·K)
Specific heat capacity470 J/(kg·K)
Electrical resistivity0.92 µΩ·m
Thermal expansion, 20 to 100 °C15.5 × 10⁻⁶ /K
Relative magnetic permeability< 1.02 (non-magnetic)
Melting range1350–1400 °C

Typical values for guidance in design calculations. Governing figures should be taken from the applicable standard or from the mill certificate for the supplied heat.

Corrosion resistance and PREN of 1.4565

The PREN of 1.4565 is 47. The pitting resistance equivalent number is calculated as PREN = %Cr + 3.3 × %Mo + 16 × %N. For the mid-range composition of 25 % Cr, 4.5 % Mo and 0.45 % N this gives 25 + 14.85 + 7.20 = 47.05. Across the full specification range the PREN falls between 42 and 52, so any compliant heat meets the PREN > 40 requirement written into most seawater specifications.

In service this provides resistance to chloride pitting and crevice corrosion in warm seawater, resistance to chloride stress corrosion cracking at temperatures where 316L and 904L fail, and resistance to the sulphuric and phosphoric acid conditions found in flue gas desulphurisation scrubbers and pickling lines.

1.4565 compared with the grades it commonly replaces
GradeEN / UNSCr %Mo %N %PREN (typ.)Rp0.2 min
316L1.4404 / S3160316.5–18.52.0–2.5≤ 0.1124200 MPa
Duplex 22051.4462 / S3220521.0–23.02.5–3.50.10–0.2235450 MPa
904L1.4539 / N0890419.0–21.04.0–5.0≤ 0.1535220 MPa
254 SMO type1.4547 / S3125419.5–20.56.0–7.00.18–0.2543300 MPa
1.45651.4565 / S3456524.0–26.04.0–5.00.30–0.6047415 MPa
Alloy 311.4562 / N0803126.0–28.06.0–7.00.15–0.2554280 MPa

Composition bands are nominal and abbreviated for comparison. 1.4565 reaches PREN 47 with only 4 to 5 % molybdenum because its chromium and nitrogen levels are higher than those of the 6 Mo grades, and it has the highest proof strength of the fully austenitic grades listed.

Forging and heat treatment of 1.4565

1.4565 has a narrower hot-working window than standard austenitic grades and work hardens quickly. The forging route used at Jiangyin Jiangnan Metal is set out below.

Open-die forging route for 1.4565
StageParametersPurpose
Soaking1150–1180 °CFull through-heating. The section must be at uniform temperature before the first blow.
Hot working1180 down to 1000 °CFinishing below 1000 °C risks edge cracking and leaves residual stress.
ReheatAs requiredReheating is preferred to forcing the last reduction. Ductility falls rapidly at the low end of the range.
Solution anneal1120–1170 °CRedissolves sigma and chi phase and restores corrosion resistance. Mandatory after forging.
QuenchWater or equivalent rapid coolingThe part must pass quickly through 1000 down to 600 °C to avoid intermetallic precipitation.

Machining and welding

  • Machining behaves as expected for a high-nitrogen austenitic grade. Use rigid set-ups, sharp positive-rake tooling, low cutting speeds, heavy positive feed and generous coolant. Avoid dwelling, which work hardens the surface.
  • Welding is normally carried out with an over-alloyed nickel-base filler of the ERNiCrMo-3 or ERNiCrMo-4 type, so that the weld metal PREN is at or above that of the parent metal.
  • Keep interpass temperature low and heat input moderate to limit time in the sigma and chi precipitation range.
  • Fabricated parts should be pickled and passivated to remove chromium-depleted and iron-contaminated surface layers.

1.4565 forgings we supply

All items are open-die forged or ring rolled to customer drawing, solution annealed and water quenched. Machining condition is to your specification: as forged, rough machined with allowance, or finish machined.

  • Seamless rolled ringsring rolled
  • Forged ringsopen-die
  • Forged flangesWN, SO, BL, LJ
  • Forged round barsto drawing
  • Forged discs and diskssolid / bored
  • Forged blocksrectangular
  • Forged shaftsstepped / plain
  • Forged eccentric shaftsmachined
  • Forged sleeveshollow
  • Forged bushingshollow
  • Forged tubes and hollowsbored
  • Forged tube sheetsdrilled on request
  • Forged pipesheavy wall
  • Forged nozzlesset-in / set-on
  • Valve bodies and blocksto drawing
  • Valve stems and seat ringsmachined
  • Forged gears and gear blanksblank / toothed
  • Forged spindlesmachined
  • Forged wheels and rollsto drawing
  • Forged manifoldsto drawing
Size envelope for 1.4565 open-die forgings
Product formSize rangeCondition supplied
Seamless rolled ringsOD 200–4000 mm, wall 50–500 mm, height ≤ 1000 mmSolution annealed, rough machined
Discs and blocksØ ≤ 2500 mm, thickness ≤ 800 mmSolution annealed
Shafts and round barsØ 80–1200 mm, length ≤ 8000 mmSolution annealed, peeled or turned
Sleeves and hollowsOD ≤ 1500 mm, ID ≥ 100 mmBored, solution annealed
Single piece weight20 kg to 20 000 kgAll forms above

For sizes outside these ranges, send the drawing. We will confirm whether the part is forgeable in 1.4565 and quote a lead time.

Applications of 1.4565 forgings

1.4565 is specified where chlorides, acids and pressure occur together. The applications below account for most of the 1.4565 enquiries we receive.

Seawater and desalination

  • Seawater pump casings, impeller hubs and shafts
  • Gate and ball valves for seawater ballast systems on tankers
  • Seawater cooling and firewater systems
  • MSF and RO desalination plant components
  • Deep-sea samplers, incubation chambers, subsea manipulator arms

Flue gas desulphurisation

  • Scrubber internals, spray header fittings and nozzles
  • Absorber recirculation pump components
  • Damper shafts and bearing sleeves
  • Off-gas and stack liner attachments

Chemical and petrochemical

  • Reactor vessel nozzles and flanges
  • Process piping components and tube sheets
  • Mixing tank and crystalliser parts
  • Acid pickling and bleaching plant equipment
  • Bubble caps and column internals

Oil, gas and marine

  • Wellhead and Christmas tree components
  • Crude oil transport system parts
  • Dredger transport system components
  • Forged crankshafts and eccentric shafts for process machinery

Pulp, paper and hydrometallurgy

  • Bleaching plant rolls, shafts and valve bodies
  • Digester and washer components
  • Autoclave and leaching circuit parts

Pharmaceutical and food

  • Synthetic rubber and organic chemical plant equipment
  • High-purity process fittings and manifolds
  • Heat exchanger tube sheets

Testing, certification and traceability

1.4565 is purchased for corrosion performance, so the test package is as important as the chemistry. State the required scope on the enquiry and it will be included in the quotation.

Test and certification scope available on 1.4565 forgings
TestStandardNotes
Ultrasonic testingEN 10228-3, SEP 1921, ASTM A388Quality class agreed per part, carried out after solution annealing
Chemical analysisLadle and product analysisReported per heat
Mechanical testingEN ISO 6892-1, ASTM A370Tensile and hardness as standard, impact on agreement
Positive material identificationPMI by XRF or OESPer piece on request
Intergranular corrosionASTM A262 practice E, EN ISO 3651-2On request
Pitting corrosionASTM G48 method A or CTest temperature to be agreed
Liquid penetrantEN ISO 3452, ASTM E165On machined surfaces
Dimensional reportTo customer drawingIssued with every shipment
Material certificateEN 10204 3.1Standard issue
Third-party certificateEN 10204 3.2TÜV, BV, SGS, DNV, Lloyd’s Register and equivalent

Every forging is traceable to its heat number, which is hard stamped or vibro-etched on the part and cross-referenced on the certificate.

Related and alternative grades

The grades below are those most often quoted as alternatives to 1.4565, either on availability or where the specification permits an equivalent. All are forged at the same plant.

Stainless steel forgings

Nickel alloy forgings for more severe duty

Browse every grade we forge in stainless steel and in nickel alloy.

Frequently asked questions about 1.4565

What is 1.4565 stainless steel?

EN 1.4565 is a nitrogen-alloyed, fully austenitic stainless steel containing 24 to 26 % chromium, 16 to 19 % nickel, 4 to 5 % molybdenum, 5 to 7 % manganese and 0.30 to 0.60 % nitrogen. Other designations for the same grade are UNS S34565, Alloy 24, ASTM A182 grade F49 and X2CrNiMnMoNbN25-18-5-4. Its PREN is 47, against 24 for 316L and 35 for 904L, so it is specified for seawater, flue gas desulphurisation and aggressive chemical service. Jiangyin Jiangnan Metal Co., Ltd. forges 1.4565 to customer drawing at its open-die forging plant in Jiangyin, Jiangsu, China.

What is the equivalent grade of 1.4565?

1.4565 is UNS S34565 in the American system, ASTM A182 grade F49 for forged flanges, fittings and valve parts, and ASTM A240 S34565 for plate. It is widely sold as Alloy 24. The EN steel names are X2CrNiMnMoNbN25-18-5-4 in SEW 400 and X2CrNiMnMoN25-18-6-5 in EN 10088-2. It is not the same grade as UNS S31254, UNS N08926 or UNS N08031, which carry different material numbers.

What is the PREN of 1.4565?

47. The pitting resistance equivalent number is calculated as PREN = %Cr + 3.3 × %Mo + 16 × %N. For the mid-range composition of 25 % Cr, 4.5 % Mo and 0.45 % N the calculation gives 25 + 14.85 + 7.20 = 47.05. Across the full specification range the PREN falls between 42 and 52. For comparison, 316L is 24, 904L is 35 and 1.4547 / S31254 is 43.

Is 1.4565 magnetic?

No. Solution annealed 1.4565 is fully austenitic with no delta ferrite, and its relative magnetic permeability is typically below 1.02. Heavy cold work raises permeability slightly, but for practical purposes the grade is non-magnetic.

How does 1.4565 compare with 904L?

1.4565 contains more chromium and considerably more nitrogen than 904L (1.4539), at a similar molybdenum level. Its PREN is 47 against 35 for 904L, and its proof strength is at least 415 MPa against approximately 220 MPa for 904L. 1.4565 is selected where the chloride level would pit 904L, or where the higher strength allows a thinner section for the same design pressure.

Can 1.4565 be open-die forged, and to what size?

Yes. It is hot worked from 1180 °C and should not be finished below 1000 °C, then solution annealed at 1120 to 1170 °C and water quenched. We supply 1.4565 as seamless rolled rings, flanges, bars, discs, blocks, shafts, sleeves, bushings, tube sheets, nozzles and valve components. Rings are produced up to 4000 mm outside diameter and single pieces from 20 kg to 20 tonnes. Send the drawing to sales@steelforgepieces.com for confirmation against your exact geometry.

What certificates are supplied with the forgings?

EN 10204 3.1 as standard, or 3.2 with a third-party witness such as TÜV, BV, SGS, DNV or Lloyd’s Register. Ultrasonic testing is carried out to EN 10228-3, SEP 1921 or ASTM A388 as specified. Intergranular corrosion testing to ASTM A262 and pitting testing to ASTM G48 are available on request, together with PMI per piece.

Does 1.4565 require post-weld heat treatment?

Not as a rule. It is a fully austenitic grade with carbon capped at 0.030 %, so sensitisation is not the concern it would be in a higher-carbon steel. The controlling factor is time spent in the sigma and chi precipitation range, which is managed by keeping heat input moderate and interpass temperature low, and by using an over-alloyed nickel-base filler so that weld metal PREN matches or exceeds the parent metal. Where the fabrication has been heavily worked or the service is severe, a full solution anneal at 1120 to 1170 °C with rapid quench restores the as-supplied condition.

What is the minimum order quantity and lead time?

There is no fixed minimum. Single-piece prototypes and small batches are normal on open-die work. Lead time depends mainly on whether 1.4565 billet is in stock or has to be melted, and on the machining and test scope. Request a firm date with your enquiry.

Request a quote for 1.4565 forgings

Send a drawing, or the outline dimensions, weight and quantity. State the governing standard, the required test scope and the delivery condition, and we will return a price and a lead time.

Company
Jiangyin Jiangnan Metal Co., Ltd.
Works
No.1 Chengxiqiao Road, Zhouzhuang Town,
Jiangyin City, Jiangsu Province, China
Business
Open-die forging factory. Rings, flanges, bars, discs, shafts and custom forgings.
Email
sales@steelforgepieces.com
Phone, WhatsApp and WeChat
+86 189 2135 9659
Materials forged
Carbon steel, alloy steel, tool steel, stainless steel, super-austenitic stainless steel and nickel alloys
Email your 1.4565 drawing