Z1NCDU31-27-03 Forgings — Alloy 28 / UNS N08028 / EN 1.4563
Z1NCDU31-27-03 is the French-style designation for the high-alloy austenitic stainless steel known internationally as Alloy 28, UNS N08028 and EN 1.4563 (X1NiCrMoCu31-27-4), sold by Alleima under the Sanicro 28 brand. It is a nickel-iron-chromium alloy with molybdenum and copper additions, nominally 31% Ni, 27% Cr, 3.5% Mo and 1% Cu, used in strong acids and chloride-bearing media.
Jiangyin Jiangnan Metal Co., Ltd. forges this grade to customer drawing as rolled rings, flanges, shafts, discs, sleeves, bushings, tube sheets and bars. Parts are solution annealed, ultrasonically tested to EN 10228-4 or ASTM A745, and released with EN 10204 3.1 or third-party 3.2 certification.
- Z1NCDU31-27-03
- Alloy 28
- UNS N08028
- EN 1.4563
- X1NiCrMoCu31-27-4
- Sanicro 28
- NF Z2NCDU31-27
- Nicrofer 3127 LC
- GOST 02Ch27N31M4
- Remanit 4563
Summary data
| Alloy family | High-alloy austenitic stainless steel, Ni-Fe-Cr-Mo-Cu |
|---|---|
| UNS number | N08028 |
| EN material number | 1.4563, X1NiCrMoCu31-27-4 |
| Reference standards | EN 10088-1, ISO 21457 |
| Nominal composition | 31 Ni / 27 Cr / 3.5 Mo / 1 Cu, balance Fe |
| Density | 8.0 g/cm³ (0.289 lb/in³) |
| PRE number | Minimum 38, per Alleima data for Sanicro 28 |
| Forging temperature | 1150-850 °C (2100-1560 °F) |
| Solution annealing | 1050-1150 °C (1920-2100 °F), rapid quench |
| Welding group | ISO 8.2, preheating not required |
| Melting route | EAF + VOD, ESR remelt on request |
| Certification | EN 10204 3.1, or 3.2 countersigned by third party |
| Supplier | Jiangyin Jiangnan Metal Co., Ltd., Jiangyin, Jiangsu, China |
Chemical composition
Two sets of limits exist for this grade and they are not the same. The ISO / UNS N08028 limits are the wider of the two. EN 1.4563 is tighter on carbon, silicon, sulphur and nickel, and caps nitrogen. State which one your order is written to, because a heat that passes N08028 will not automatically pass 1.4563.
| Element | ISO / UNS N08028 | EN 1.4563 | NF Z2NCDU31-27 |
|---|---|---|---|
| Nickel (Ni) | 30.0-34.0 | 30.0-32.0 | 30.0-32.0 |
| Chromium (Cr) | 26.0-28.0 | 26.0-28.0 | 26.0-28.0 |
| Molybdenum (Mo) | 3.0-4.0 | 3.0-4.0 | 3.0-4.0 |
| Copper (Cu) | 0.6-1.4 | 0.7-1.5 | 0.7-1.5 |
| Carbon (C) | 0.030 max | 0.02 max | 0.02 max |
| Silicon (Si) | 1.00 max | 0.70 max | 0.50 max |
| Manganese (Mn) | 2.50 max | 2.00 max | 2.00 max |
| Phosphorus (P) | 0.030 max | 0.030 max | 0.025 max |
| Sulphur (S) | 0.030 max | 0.010 max | 0.010 max |
| Nitrogen (N) | not specified | 0.10 max | not specified |
| Iron (Fe) | Balance | Balance | Balance |
Mechanical properties, solution annealed
Values below apply to forgings in the hot-worked and solution-annealed condition (+AT) at 20 °C. Alloy 28 is single-phase austenitic and is not hardenable by heat treatment. Strength above these levels comes only from cold work, which rarely applies to heavy forgings.
| Property | Metric | Imperial |
|---|---|---|
| Proof strength Rp0.2 | ≥ 220 MPa | ≥ 32 ksi |
| Tensile strength Rm | 500-700 MPa | 73-102 ksi |
| Elongation A | ≥ 40% | ≥ 40% |
| Hardness | ≤ 230 HB | ≤ 230 HB |
| Impact KV, longitudinal, +20 °C | ≥ 100 J | ≥ 74 ft·lb |
| Impact KV, transverse, +20 °C | ≥ 60 J | ≥ 44 ft·lb |
| Impact KV, transverse, −196 °C | ≥ 60 J | ≥ 44 ft·lb |
| Modulus of elasticity | 195 GPa | 28,300 ksi |
Strength at elevated temperature
| Temperature | Rp0.2 min, MPa | Rm min, MPa |
|---|---|---|
| 50 °C | 209 | 485 |
| 100 °C | 190 | 460 |
| 150 °C | 175 | 445 |
| 200 °C | 160 | 430 |
| 250 °C | 155 | 410 |
| 300 °C | 150 | 400 |
| 350 °C | 145 | 395 |
| 400 °C | 135 | — |
| 450 °C | 125 | — |
| 500 °C | 120 | — |
| 550 °C | 115 | — |
Physical properties
| Property | Value |
|---|---|
| Density at 20 °C | 8.0 g/cm³ |
| Specific heat at 20 °C | 450 J/(kg·K) |
| Thermal conductivity at 20 °C | 12 W/(m·K) |
| Linear expansion, 20-100 °C | 15.8 × 10-6/K |
| Linear expansion, 20-300 °C | 16.5 × 10-6/K |
| Linear expansion, 20-500 °C | 17.3 × 10-6/K |
| Modulus at 100 °C | 190 GPa |
| Modulus at 200 °C | 182 GPa |
| Modulus at 300 °C | 174 GPa |
| Modulus at 400 °C | 166 GPa |
| Modulus at 500 °C | 158 GPa |
Corrosion behaviour
Alloy 28 sits between the super-austenitic stainless steels and the nickel-base alloys on both cost and performance. What sets it apart is 27% chromium combined with a deliberate copper addition, which gives it good behaviour in reducing acids, sulphuric and phosphoric in particular, while the 3-4% molybdenum and 31% nickel handle chlorides.
Published material data describes the grade as resistant to sour gas, phosphoric, sulphuric and acetic acids, and vinyl chloride, with corrosion resistance rated better than UNS N08904 / 904L / 1.4539. It is resistant to intergranular corrosion in the as-delivered condition, which the low carbon ceiling makes possible, and it resists stress corrosion cracking well, including in hot chloride environments. Alleima gives Sanicro 28 a minimum PRE number of 38, which indicates high resistance to chloride pitting relative to standard austenitic grades. The alloy falls in welding group ISO 8.2 and needs no preheat.
Forged products in this grade
Everything below is produced by open-die forging and ring rolling to the customer's drawing or dimensional sheet. We do not hold this grade as finished stock. Each order is forged from certified billet.
| Product form | Typical application | Notes |
|---|---|---|
| Seamless rolled rings | Heat exchanger shells, vessel courses, valve bodies | Radial-axial rolled, grain flow follows the circumference |
| Forged flanges | Pressure vessels, piping, air receivers | Weld-neck, blind, slip-on, special bores to drawing |
| Forged shafts and spindles | Pumps, agitators, compressors, gearboxes | Upset and drawn out, stepped shafts machined to print |
| Forged discs and disks | Blind covers, blanks for machining | Upset from billet with controlled reduction ratio |
| Forged tube sheets | Shell-and-tube heat exchangers | Drilled and finish-machined on request |
| Forged bushings and sleeves | Subsea and downhole assemblies, wear parts | Bored and trepanned to cut machining allowance |
| Forged round bars | Valve stems, fasteners, machining stock | Peeled or rough-turned finish available |
| Forged pipes and hollows | Corrosive-service pipework, nozzles | Trepanned from solid or expanded from hollow |
| Valve components | Ball, gate, globe, check and plug valves | Bodies, bonnets, seat rings, stems, blocks |
| Blocks, blanks, near-net shapes | General machined components | Saw-cut to length |
Industries served
Chemical and petrochemical processing. Sulphuric and phosphoric acid plant. Shell-and-tube heat exchangers, coolers, tanks, pumps, pipelines and pressure vessels. Offshore and subsea oil production equipment and wellheads. Seawater and chloride-bearing cooling water circuits. Pulp and paper bleaching plant. Pharmaceutical and biochemical process equipment. Published descriptions of the grade also cite cryogenic service, mining platform components, and aircraft structures, screws and valves.
How we forge and test it
Melting and billet
Billet is procured to EAF + VOD practice, which is what delivers the low carbon and sulphur ceilings this grade needs. ESR remelting is offered where the application calls for better cleanliness and less segregation, typically on thick-section and pressure-retaining parts. ESR is quoted as an option, not applied by default.
Forging
Worked between 1150 and 850 °C. Alloy 28 has a narrower hot-working window than carbon or low-alloy steel and work-hardens quickly, so we plan reheats rather than force reduction at the bottom of the range. Minimum forging reduction ratio is agreed with the customer; 3:1 or 4:1 is usual for pressure-retaining parts.
Solution annealing
Annealed at 1050-1150 °C and quenched rapidly, normally in water. This dissolves precipitated phases and restores the fully austenitic structure, which is what secures intergranular corrosion resistance in the delivered condition. Furnace charts are supplied with the certificate on request.
Testing
Because Alloy 28 is austenitic, its coarse grain structure scatters and attenuates ultrasound far more than ferritic steel does. The correct ultrasonic specifications are therefore EN 10228-4, which covers austenitic and austenitic-ferritic stainless steel forgings, or ASTM A745/A745M for austenitic steel forgings. EN 10228-3 and ASTM A388 are written for ferritic and martensitic steels. If we receive those on a purchase order for this grade we will raise a technical query before proceeding.
| Test | Specification | Applied |
|---|---|---|
| Ultrasonic testing | EN 10228-4 or ASTM A745/A745M | Standard on pressure-retaining parts |
| Liquid penetrant | EN ISO 3452 or ASTM E165 | On request |
| Chemical analysis | Spectrographic, per heat | Every heat, reported on certificate |
| Tensile and impact | EN ISO 6892-1, EN ISO 148-1 | Per heat-treatment batch |
| Intergranular corrosion | ASTM A262, practice as specified | On request |
| Hardness | Brinell | Standard, mandatory on sour-service orders |
| Material identification | PMI / XRF | On request |
Certification
Forgings are released with an EN 10204 Type 3.1 inspection certificate issued by our works inspection department, which is independent of manufacturing. Where the contract calls for it we arrange Type 3.2, which carries the additional countersignature of an independent inspector or the purchaser's representative. Third-party witnessing by agencies such as TUV, BV, SGS or Lloyd's is organised against the purchase order.
Machining
This alloy is considerably harder to machine than 316/316L. It work-hardens fast and conducts heat poorly, so heat concentrates at the cutting edge. In practice that means a large cut in surface speed against a standard austenitic grade, while feed should be reduced only slightly. Light feeds let the tool skid across the work-hardened layer and make matters worse. Use rigid setups, sharp positive-rake coated carbide, generous through-tool coolant, and avoid dwelling or re-entering the same cut. We can supply forgings with extra machining allowance where the customer's shop is not set up for high-alloy work.
Frequently asked questions
What is Z1NCDU31-27-03 equivalent to?
It corresponds to Alloy 28, UNS N08028 and EN 1.4563 (X1NiCrMoCu31-27-4), brand name Sanicro 28. Other listed equivalents include GOST 02Ch27N31M4, Nicrofer 3127 LC, Remanit 4563 and Nirosta 4563. Cross-reference tables give the NF designation as Z2NCDU31-27.
Is it a stainless steel or a nickel alloy?
It is classed as a high-alloy austenitic stainless steel, and is sometimes described as a nickel-iron-chromium alloy because iron is the balance while nickel reaches 30-34%. Suppliers catalogue it under both headings, which is why this page sits in our stainless steel section alongside our nickel alloy forgings.
What heat treatment is used?
Solution annealing at 1050-1150 °C followed by a rapid quench, normally in water. The alloy is fully austenitic and cannot be hardened by heat treatment. The anneal exists to dissolve precipitates and secure corrosion resistance, not to raise strength.
How does Alloy 28 compare with 904L?
Published material data rates Alloy 28 / 1.4563 as having better corrosion resistance than UNS N08904 / 904L / 1.4539. The higher chromium and the copper addition are the main reasons, particularly in sulphuric and phosphoric acid service.
Which ultrasonic standard applies?
EN 10228-4 or ASTM A745/A745M, both written for austenitic forgings. EN 10228-3 and ASTM A388 cover ferritic and martensitic steels and should not be specified for this grade.
What sizes can you forge?
Capability depends on the product form and the billet available for the heat. Send the drawing, finished weight and quantity to sales@steelforgepieces.com and we will confirm feasibility, reduction ratio and lead time with the quotation.
Can you supply EN 10204 3.2 certification?
Yes. Type 3.1 is issued as standard by our independent works inspection department. Type 3.2 adds the countersignature of an independent inspector or the purchaser's representative and is arranged against the purchase order.
Do you supply machined parts or only black forgings?
Both. We supply as-forged and heat-treated blanks, rough-machined forgings with an agreed allowance, and finish-machined components to drawing. Given how demanding this alloy is to cut, many customers find it cheaper for us to carry out the rough machining.
Request a quotation
Send a drawing, a sketch, or the dimensions and quantity. We quote open-die forgings in Alloy 28 / UNS N08028 to customer specification, with melting route, NDT level and certification grade confirmed in writing before order acceptance.
Jiangyin Jiangnan Metal Co., Ltd.
No.1 Chengxiqiao Road, Zhouzhuang Town, Jiangyin City, Jiangsu Province, China
Related grades we forge
| Grade | Why it is considered alongside Alloy 28 |
|---|---|
| Alloy 31 / UNS N08031 | Higher-alloyed austenitic grade in the same family for more aggressive acid duty |
| Incoloy 825 | Ni-Fe-Cr with Mo and Cu, routinely compared for acid and sour service |
| Incoloy 926 / UNS N08926 | Super-austenitic alternative for seawater and chloride service |
| Hastelloy C-276 | Ni-Mo-Cr alloy for conditions beyond the range of austenitic stainless |
| Inconel 625 | Ni-Cr-Mo-Nb alloy for high temperature and severe corrosion |
| A286 | Precipitation-hardening austenitic grade where higher strength is needed |
Published , last reviewed . Technical data is compiled from published datasheets for EN 1.4563 / UNS N08028 and is given for guidance. Properties for a specific order are confirmed on the heat certificate.