Grade sheet X8CrMnNi18-8 / W.Nr. 1.3965  |  Melted and forged in one works since 1997 +86 189 2135 9659  |  sales@steelforgepieces.com
Jiangnan Metal Open-Die Forging & Ring Rolling Get a quote

Material number 1.3965 · Non-magnetisable

X8CrMnNi18-8 Forgings Chromium-manganese-nickel-nitrogen austenitic steel, forged to drawing from our own melt.

X8CrMnNi18-8 is a non-magnetisable austenitic steel with material number 1.3965. It carries 17.00 to 19.00 % chromium, 7.50 to 9.50 % manganese, 4.50 to 6.50 % nickel and 0.100 to 0.200 % nitrogen, with carbon capped at 0.10 %. Manganese and nitrogen hold the austenite in place of part of the nickel, so the steel keeps a fully austenitic, non-magnetisable structure on a nickel content well below that of a standard 18/8.

We melt this grade ourselves rather than buying billet. Nitrogen in the 0.100 to 0.200 % band is a specification point that has to be hit in the ladle, and our vacuum oxygen decarburisation and protective-atmosphere electroslag routes exist for that kind of control. The part then goes through the press or the ring mill, the heat treatment furnaces, the machine shop and inspection without leaving the site, so the certificate traces back to a melt number.

Grade data1.3965
Grade
X8CrMnNi18-8
Mat. no.
1.3965
Type
Austenitic Cr-Mn-Ni-N
Magnetism
Non-magnetisable
Melting
EF + LF + VOD; ESR on request
Max piece
30 t single piece
Max ring
6,000 mm outside diameter
Min order
10 kg, no minimum piece count
Lead time
20 to 60 days
Certificate
EN 10204 3.1 or 3.2
01

Chemical composition

Limits below are the published analysis for material number 1.3965. The heat analysis for your order is the one printed on the certificate that ships with the forging.

X8CrMnNi18-8 / 1.3965, percent by mass
LimitCSiMn PSCrNi NFe
Min––7.50––17.004.500.100Balance
Max0.101.009.500.0450.03019.006.500.200

Figures identify the grade. The binding values for a delivered forging are those on its EN 10204 certificate.

Why the nickel sits below a standard 18/8

A conventional 18/8 steel needs roughly 8 % nickel to keep its structure austenitic at room temperature. In 1.3965 the manganese is lifted to 7.50 to 9.50 % and nitrogen is added at 0.100 to 0.200 %. Both are strong austenite formers, so the nickel can come down to 4.50 to 6.50 % and the steel still stays austenitic, and therefore non-magnetisable, through its working range. Two things follow in practice. Nickel is the most volatile line item in a stainless price, and this grade is less exposed to it. And because the structure is held by manganese and nitrogen rather than nickel alone, the grade gets specified where a part must not disturb a magnetic field.

02

Designations and equivalents

The name and the material number are the two designations we treat as unambiguous. Everything below them is a cross-reference and should be checked against your own specification.

Cross-reference for X8CrMnNi18-8
SystemDesignationConfidence
German nameX8CrMnNi18-8, also written X8CrMnNi 18 8Primary designation
Werkstoffnummer1.3965Primary material number
AISI / SAEXM-10; 202Published cross-reference
UNSS21900; S20200Published cross-reference
Trade nameNitronic 50 or Nitronic 60, depending on the source consultedSources conflict, confirm before ordering
Read this before ordering against a trade name Cross-reference tables for 1.3965 do not agree with each other on the Nitronic mapping. A supplier material datasheet gives Nitronic 60 as a special designation, while a machining cutting-data chart maps X8CrMnNi 18-8 to Nitronic 50. Those are two different alloys with different analyses and different behaviour in service, so one of the two mappings will be wrong for your application. We therefore quote and manufacture against the designation and the composition limits written on your drawing, specification or purchase order, not against a trade name taken from a conversion table. Send us the specification and we will confirm in writing what analysis we will supply before you place the order. Nitronic is a registered trademark of its owner and appears here only to help identify the grade.
03

Mechanical properties and delivery condition

Properties for this grade follow from the delivery condition, the section size of the forging and where the test piece is taken, so a single published figure would be misleading on a heavy section. We agree the property set against your specification before manufacture and report the measured values on the certificate.

Tell us the following at enquiry stage and we will confirm what we can commit to: delivery condition, usually solution annealed unless your specification states otherwise; required 0.2 % proof strength and tensile strength; elongation and reduction of area; impact energy and the test temperature; hardness range; and any magnetic permeability limit. On non-magnetisable work the permeability limit is often the governing acceptance criterion rather than strength, so state it explicitly and state how it is to be measured.

Heat treatment runs on 14 furnaces here, including car-bottom furnaces with a working chamber up to 8,000 x 2,000 x 2,000 mm and two well-type furnaces 15,000 mm deep by 1,500 mm diameter, which let long shafts be solution treated and quenched vertically rather than laid down. Solution annealing is a standard in-house treatment, not a subcontracted operation.

04

Product forms we forge in 1.3965

Each item below is produced to your drawing or to finished dimensions with a stated machining allowance. Open-die forging and ring rolling carry no die cost, which is why single pieces, prototypes and short runs are ordinary work here. Minimum order is 10 kg with no minimum piece count.

  • RingsSeamless rolled rings, rectangular or contoured section
  • RingsUpset and punched forged rings, retaining rings, gear ring blanks
  • FlangesWeld neck, blind, slip-on, socket weld, lap joint, orifice
  • BarsForged round bars, flat bars, square bars
  • DiscsSolid forged discs, covers, tube sheets
  • ShaftsStepped shafts, spindles, eccentric shafts, pinion shafts
  • HollowSleeves, bushings, bored cylinders, heavy-wall pipe sections
  • ValveBodies, bonnets, blocks, stems, seat rings
  • OtherNozzles, manifolds, blocks, wheels, rolls

Working envelope

Plant limits governing 1.3965 forgings
ProductLimitSet by
Rolled ringsOutside diameter up to 6,000 mm6 m radial-axial ring mill
Small ringsFrom 50 mm outside diameterUpset and punch route below ring-mill range
ShaftsUp to 14,000 mm turned lengthC61160 lathe; 15 m well furnace for vertical quench
Discs, tube sheets, blocksUp to 5,000 mm machined diameter5,000 mm vertical turning lathe
Bored cylinders1,600 mm diameter by 10,000 mmCNC deep-hole drilling machine
Single piece weightUp to 30,000 kg60 t maximum heat; 6,300 t press

These are plant limits. The practical limit for a given 1.3965 part also depends on the required forging reduction and heat treatment response, which we confirm when we see the drawing.

05

Where this grade is used

The property that drives most enquiries for 1.3965 is that it will not become magnetised. Corrosion resistance comes from 17 to 19 % chromium and strength is supported by the nitrogen addition. The areas below are where our customers place this grade; the governing requirement is always the one on their specification.

Low magnetic permeability work

Housings, sleeves, rings and shafts for instrumentation, measurement and sensing equipment, electrical and generator components, and downhole or subsea assemblies where a ferromagnetic part would disturb a reading. This is the usual reason the grade is chosen over a standard Cr-Ni austenitic steel.

Oil, gas and offshore

Forged rings, flanges, bushings, sleeves and shafts for onshore and offshore production equipment, subsea and deepwater systems, compressor and generator components.

Chemical and process plant

Flanges, tube sheets, forged tubes and heat exchanger components, separator parts, pump and compressor parts in corrosive process duty.

Valves and flow control

Valve bodies, bonnets, seat rings, stems and blocks for ball, gate, globe, check, plug and strainer applications.

Rotating and power transmission equipment

Shafts, spindles, bars and ring or gear blanks for gearboxes, turbines, gas compressors and heavy machinery.

Food, pharmaceutical and water

Forged components for food processing and storage equipment, pharmaceutical production, pulp and paper plant, desalination and water treatment.

06

How we make it

Most forging suppliers in China buy billet. We start a step earlier, at the furnace, which matters more on a nitrogen-alloyed grade than on a plain one.

Melting and nitrogen control

Standard route for this grade is the electric arc furnace, ladle refining, then vacuum oxygen decarburisation, which is the step that lets carbon be held at 0.10 % maximum while nitrogen is brought into the 0.100 to 0.200 % band and kept there. Maximum heat size is 60 t. Where a specification calls for improved cleanliness or tighter structural homogeneity, the grade can be remelted on our protective-atmosphere electroslag furnaces, which are the route we use for nitrogen-alloyed steels. Say so at enquiry stage, because remelting changes both price and lead time.

Forging and ring rolling

Open-die presses of 6,300 t, 4,000 t and 2,000 t, five hammers from 750 kg to 5 t, and radial-axial ring mills at 1 m, 3 m and 6 m. Forging reduction ratio is set against your specification rather than left to the shop.

Heat treatment

14 furnaces on site covering solution annealing, ageing, annealing and stress relief, including two well-type furnaces 15 m deep for vertical treatment of long shafts.

Machining, testing and certification

Vertical lathes to 5,000 mm swing, horizontal lathes to 14,000 mm between centres, CNC lathes and a deep-hole drilling machine. Parts can be supplied as forged, proof machined for inspection, or finish machined. Ultrasonic testing is carried out to EN 10228-3, SEP 1921 or ASTM A388 at the acceptance class on your order, using full-digital flaw detectors in our own laboratory. Certificates are issued to EN 10204 3.1, or EN 10204 3.2 witnessed by BV, DNV, LR, SGS, TUV or your own inspector, in which case tell us which body you use when you send the enquiry. The works holds CCS, BV, DNV, LR and NK approvals.

07

The manufacturer

This grade sheet is published by Jiangyin Jiangnan Metal Co., Ltd., an integrated steel melting works, open-die forge and ring rolling mill at No.1 Chengxiqiao Road, Zhouzhuang Town, Jiangyin City, Jiangsu Province, China, in operation since 1997.

460 people work at the plant, among them 9 senior engineers, 32 intermediate engineers and 140 technicians. Melting covers EF, LF, VOD, VIM, VAR and ESR up to 60 t heats. Forging runs to a 6,300 t press and a 6 m ring mill with a 30 t maximum single piece. The works holds CCS, BV, DNV, LR and NK approvals and ships to North America, Europe, the Middle East and Asia-Pacific. More than 300 grades are forged here across carbon and low-alloy steel, stainless and duplex, tool and die steel, and nickel alloys. Enquiries on X8CrMnNi18-8 go to sales@steelforgepieces.com or +86 189 2135 9659.

08

Questions we are asked about this grade

What is X8CrMnNi18-8?

A non-magnetisable austenitic steel carrying material number 1.3965. It holds 17.00 to 19.00 % chromium, 7.50 to 9.50 % manganese, 4.50 to 6.50 % nickel and 0.100 to 0.200 % nitrogen, with carbon at 0.10 % maximum. Manganese and nitrogen stabilise the austenite in place of part of the nickel.

What is the material number for X8CrMnNi18-8?

1.3965. If your drawing quotes only one of the two, they are the same steel.

Is X8CrMnNi18-8 magnetic?

No, it is classified as a non-magnetisable steel. If your application carries a numerical permeability limit, put it on the enquiry along with the measurement method, because it affects the melting and heat treatment route and it needs to appear on the certificate.

Why does it contain less nickel than a standard 18/8 steel?

A conventional 18/8 steel needs roughly 8 % nickel to keep its structure austenitic at room temperature. In 1.3965 the manganese is lifted to 7.50 to 9.50 % and nitrogen is added at 0.100 to 0.200 %. Both are strong austenite formers, so nickel can come down to 4.50 to 6.50 % while the steel stays austenitic and non-magnetisable.

Is it the same as Nitronic 50 or Nitronic 60?

That cannot be answered with a clean yes, because published sources disagree. One supplier datasheet for 1.3965 lists Nitronic 60 as a special designation, and a separate machining cutting-data chart maps X8CrMnNi 18-8 to Nitronic 50. Those are two different alloys.

The cross-references published consistently are AISI and SAE XM-10 and 202, and UNS S21900 and S20200. Order against the designation and composition limits on your own specification rather than against an inferred trade name.

What are the mechanical properties?

They depend on delivery condition, section size and test position, so we do not publish one universal figure for the grade. Send your required proof strength, tensile strength, elongation, impact values, hardness and any permeability limit, and we will confirm in writing what we can commit to before you order. Measured values for your forging go on the EN 10204 certificate.

What sizes can you forge?

Rolled rings to 6,000 mm outside diameter, shafts to 14,000 mm turned length, discs and tube sheets to 5,000 mm machined diameter, bored cylinders to 1,600 mm diameter by 10,000 mm, and single pieces to 30 t. Small rings start from 50 mm outside diameter on the upset and punch route.

What is the minimum order and the lead time?

Minimum order is 10 kg with no minimum piece count, so one-off pieces and prototypes are accepted. Lead time is 20 to 60 days depending on size, melting route and heat treatment.

What testing and certification do you supply?

Ultrasonic testing to EN 10228-3, SEP 1921 or ASTM A388 at the acceptance class stated on the order, and certification to EN 10204 3.1, or EN 10204 3.2 witnessed by a third-party inspection body where the project requires it. The works holds CCS, BV, DNV, LR and NK approvals.

Who supplies X8CrMnNi18-8 forgings?

Jiangyin Jiangnan Metal Co., Ltd., No.1 Chengxiqiao Road, Zhouzhuang Town, Jiangyin City, Jiangsu Province, China. Telephone +86 189 2135 9659, email sales@steelforgepieces.com.

Request a quotation

Send the drawing, or the finished dimensions with the machining allowance you want left on. To get a firm price and lead time back on the first reply, include the grade and any equivalent written on your specification, the quantity, the delivery condition and mechanical properties required, any magnetic permeability limit, the ultrasonic acceptance class, and whether you need EN 10204 3.1 or 3.2.

CompanyJiangyin Jiangnan Metal Co., Ltd.
Open-die forging factory
Plant addressNo.1 Chengxiqiao Road, Zhouzhuang Town, Jiangyin City, Jiangsu Province, China
Telephone, WhatsApp, WeChat+86 189 2135 9659