Jiangyin Jiangnan Metal Co., Ltd. - Open-Die Forging Factory No.1 Chengxiqiao Road, Zhouzhuang Town, Jiangyin, Jiangsu, China  |  +86-189-2135-9659  |  sales@steelforgepieces.com

Home › Stainless Steel › AISI 444

AISI 444 Forgings: UNS S44400 / SUS 444 / EN 1.4521 (X2CrMoTi18-2)

Open-die forged bars, hollow bars, seamless rolled rings, discs and blocks, made to drawing by Jiangyin Jiangnan Metal Co., Ltd., Jiangsu, China.

AISI 444 is a stabilised ferritic stainless steel with about 18% chromium and 2% molybdenum, and very low carbon and nitrogen. The Cleveland-Cliffs product datasheet for Type 444 states that it gives pitting and crevice corrosion resistance better than most ferritic stainless steels and some austenitic stainless steels, matches Type 304 in many corrosion environments, and beats both Type 304 and Type 316 on chloride stress corrosion cracking. We forge the grade into rings, sleeves, shafts and discs for hot-water tanks, heat exchangers, and food, brewing and wine-making plant.

  • Ferritic, magnetic
  • 18Cr-2Mo
  • PREN about 25
  • Forging 1050-750 C
  • EN 10204 3.1 certificate
  • Quote within 24 hours

Key facts at a glance

Designation cross-reference for AISI 444, from the Metalcor, Virgamet and ModulusMetal datasheets.
UNS numberS44400 (S44401 is also listed for the ASTM variant)
EN number and name1.4521 / X2CrMoTi18-2
JIS (Japan)SUS444, SUS444TP
GB (China)019Cr19Mo2NbTi, 00Cr18Mo2
Other designationsSS 2326, UNE F3123, AS 1449 grade 444, SAE J405 S44400
StructureFerritic, magnetic
Product standardsASTM A240 (plate, sheet, strip); ASTM A268 (tubing); EN 10028-7 (flat products for pressure purposes)
PRENAbout 25 (Virgamet); 23.3 to 28.3 range (ModulusMetal)

Chemical composition of AISI 444 / SUS 444 / 1.4521

The two main specifications are not the same, and the difference matters when you order forgings. ASTM A240 UNS S44400 is dual-stabilised with titanium and niobium and controls the combined Ti plus Nb content. EN 1.4521 specifies titanium only. Tell us which standard your drawing calls up before we cut billet.

Composition in weight percent. ASTM column from the Cleveland-Cliffs Type 444 product datasheet; EN 1.4521 and JIS SUS444 columns from Virgamet and Metalcor.
ElementASTM A240, UNS S44400EN 1.4521, X2CrMoTi18-2JIS SUS444
C0.025 max0.025 max0.025 max
Si1.00 max1.00 max1.00 max
Mn1.00 max1.00 max1.00 max
P0.04 max0.04 max0.04 max
S0.03 max0.015 max0.03 max
Cr17.5 to 19.517.0 to 20.017.0 to 20.0
Mo1.75 to 2.51.80 to 2.501.75 to 2.50
Ni1.00 maxnot specifiednot specified
N0.035 max0.030 max0.025 max
Ti / NbTi + Nb: 0.20 + 4(C+N) min, 0.80 maxTi: 0.15 to 0.80, i.e. 4(C+N) + 0.15not specified
FeBalance
Ordering note. Stabilisation chemistry is the most common reason 444 material gets rejected on receipt. If your specification is ASTM A240 or A268, the heat has to satisfy the Ti plus Nb formula, and a titanium-only heat made to EN 1.4521 will not always pass. State the standard on your enquiry and we will match the melt source to it.

Mechanical properties of AISI 444

Published figures vary with the standard and the product form, so the three data sets in common use are given separately rather than averaged into one.

Mechanical properties in the annealed condition, with the source shown for each column.
PropertyASTM A240 minimum (Cleveland-Cliffs, sheet and strip)Typical (Cleveland-Cliffs)EN 10028-7 hot-rolled plate (Virgamet)
Tensile strength Rm414 MPa (60 ksi) min515 MPa (75 ksi)420 to 620 MPa, longitudinal
0.2% proof strength Rp0.2276 MPa (40 ksi) min360 MPa (52 ksi)280 MPa min, longitudinal
Elongation27% min in 50.8 mm30%20% min
HardnessB90 maxB85185 HB max

AZoM lists grade 444 at 415 MPa tensile, 275 MPa yield, 20% elongation and 95 HRB. ModulusMetal gives wider annealed ranges of 400 to 640 MPa tensile, 275 to 350 MPa yield and 20 to 40% elongation. What your forging actually achieves depends on section size and final anneal, and the measured values appear on the EN 10204 3.1 certificate for the heat.

Proof strength at elevated temperature (EN 1.4521)

Minimum yield strength against temperature for annealed 1.4521, per Virgamet.
Temperature, C50100150200250300350400
Re min, MPa294250240230220210205200

Physical properties

Room-temperature physical properties. First column from Cleveland-Cliffs, second from Metalcor and Virgamet.
PropertyCleveland-Cliffs (Type 444)Metalcor / Virgamet (1.4521)
Density7.75 g/cm3 (0.28 lb/in3)7.7 to 7.73 g/cm3
Thermal conductivity26.8 W/m.K at 100 C23 W/m.K
Coefficient of thermal expansion11.0 um/m.K, 0 to 100 C10.4 x 10-6 /K
Specific heat0.427 kJ/kg.K0.43 kJ/kg.K
Electrical resistivity57 uOhm.cm0.8 Ohm.mm2/m
Modulus of elasticitynot stated220 GPa (Metalcor); 195 to 205 GPa (ModulusMetal)

Forging and heat treatment

These are the parameters we work to in Jiangyin, taken from the published 1.4521 processing data.

Recommended hot working and heat treatment for 1.4521 / AISI 444, per Virgamet.
Forging1050 down to 750 C, then water, air or gas cooling
Hot rolling1050 down to 750 C, then water, air or gas cooling
Annealing750 to 900 C, air or gas cooling; furnace cooling only in special cases
HardeningNot applicable, ferritic grade, not hardenable by heat treatment
475 C embrittlement. Ferritic stainless steels lose toughness if they are held in, or cooled slowly through, roughly 315 to 540 C. This is a different mechanism from sigma-phase embrittlement, which happens at higher temperatures. Cooling after forging and after annealing therefore has to be brisk through that band, and we do not furnace-cool 444 forgings unless a drawing calls for it. The same effect caps practical continuous service temperature well below the oxidation limit of the grade.

Weldability

Cleveland-Cliffs describes the ferritic class as generally weldable by common fusion and resistance methods, but states that Type 444 welds less readily than Type 409 because of its higher chromium plus molybdenum and niobium content. Low weld heat input, few discontinuities and occasional pre-warming before forming are advised, with extra care against brittle weld fractures in cold weather. AWS E/ER 316L is the filler normally specified, and Metalcor lists 1.4430 as suitable. Virgamet puts the steel in ISO welding group 7.1, with good weldability in small cross-sections, limited weldability in larger ones, and preheating recommended.

Corrosion resistance and comparison with 304 and 316

Comparison drawn from the Cleveland-Cliffs Type 444 datasheet and the Metalcor 1.4521 datasheet. Statements about 304 and 316 are those made in those sources relative to 444.
CriterionAISI 444, ferriticType 304 / 316, austenitic
General corrosionEqual to Type 304 in many environments; Metalcor rates resistance as equal to 1.4401 and 1.4404Baseline
Chloride stress corrosion crackingBetter than both 304 and 316. SSINA lists ferritics including 444 as very resistantSusceptible
Pitting and creviceBetter than most ferritics and some austenitics; PREN about 25304 lower, 316 comparable
Thermal expansionLowerHigher
Thermal conductivityBetterLower
Nickel content1% max, so largely insulated from nickel price swings8 to 14%
MagneticYesNo, in the annealed condition
Weldability and low-temperature toughnessMore restricted, see the weldability notes aboveGenerally better

Cleveland-Cliffs reports good corrosion resistance in moderately severe environments, including chlorides and the organic acids found in foods and beverages, together with satisfactory resistance to dilute sulfuric acid and to highly concentrated sodium hydroxide. Virgamet notes the steel is suitable for underwater use provided chloride concentration stays below about 200 ppm, with a lower limit in hot water or where the design is conservative. Virgamet also gives a critical pitting temperature below 10 C, so 444 is not a seawater immersion grade. Ask us about duplex or 6-Mo alternatives for that duty.

Typical applications

Cleveland-Cliffs lists current uses for Type 444 in food processing, brewery and wine-making equipment, hot-water tanks, heat exchanger tubing and automotive components, and notes that its oxidation and creep resistance at elevated temperature make it a preferred material in demanding automotive exhaust work. Metalcor adds cold-heading parts and heat exchanger tubes. Virgamet lists bolts, nuts, hot water tanks and chimney ducts. In forged form we most often supply 444 for heat exchanger tubesheets and shell flanges, hot water and brewing vessel parts, pump and valve bodies in chloride-bearing water, and shafts and sleeves on jobs where chloride SCC has already caused failures in 304 or 316.

AISI 444 forged products we make

Everything below is open-die forged to the customer's drawing at our Jiangyin works. We do not sell from a fixed size list, so send the drawing or a dimensioned sketch with the quantity and the governing standard.

AISI 444 / SUS 444 forged product range, Jiangyin Jiangnan Metal Co., Ltd.
CategoryItems
Forged barsRound bars, rods, square bars, rectangular and flat bars, hexagonal bars, step shafts
Hollow sectionsHollow bars, sleeves, bushes and bushings, forged pipes and tubes, barrels, casings, shells, cylinders, hubs, housings
RingsForged rings, seamless rolled rings, ring flanges, retaining rings
Flat productsDiscs, disks, blocks, forged plates, tubesheets
OtherForged blanks and near-net shapes, rough-machined and finish-machined parts

Quality documentation

Standard supply includes a chemical analysis and mechanical test report to EN 10204 3.1. Ultrasonic testing, PMI, dye penetrant, intergranular corrosion testing to ASTM A262, hardness mapping and third-party witness inspection are available on request. Ask for them at enquiry stage so the route can be planned into the heat.

Watch the specification. ASTM A182 grade F44 is not AISI 444. F44 is the 6-Mo super-austenitic grade UNS S31254. If a piping specification calls for F44, confirm which material is really intended before ordering. We supply both, but they are different alloys at very different prices.

Frequently asked questions

What is AISI 444 stainless steel?
AISI 444, also written UNS S44400, JIS SUS444 and EN 1.4521 X2CrMoTi18-2, is a low-carbon, low-nitrogen stabilised ferritic stainless steel with about 18% chromium and 2% molybdenum. Cleveland-Cliffs describes it as equivalent to Type 304 in many corrosion environments, with pitting and crevice corrosion resistance better than most ferritic stainless steels and some austenitic grades. It is magnetic and cannot be hardened by heat treatment.
Is AISI 444 better than 316 stainless steel?
That depends on the failure mode you are designing against. Cleveland-Cliffs states Type 444 has chloride stress corrosion cracking resistance better than Type 304 and Type 316, and Metalcor rates 1.4521 corrosion resistance as equal to 1.4401 and 1.4404. On the other side, 444 is ferritic: toughness is lower, minimum service temperature is limited, and Cleveland-Cliffs rates weldability below even Type 409. For chloride SCC problems in hot water and heat exchanger service, 444 is often the better engineering answer. For cryogenic duty or heavily welded fabrication, 316L still wins.
At what temperature is AISI 444 forged?
From 1050 C down to a 750 C finish, followed by water, air or gas cooling, then annealing at 750 to 900 C with air or gas cooling. Cooling has to be brisk through about 315 to 540 C to keep clear of 475 C embrittlement.
Which standards cover AISI 444?
ASTM A240 covers plate, sheet and strip. ASTM A268 covers tubing. EN 10028-7 covers 1.4521 flat products for pressure purposes. Forgings are normally ordered to the chemistry of A240 or EN 10028-7 with mechanical properties agreed on the purchase order, because there is no dedicated ASTM forging specification in wide use for this grade.
Can Jiangyin Jiangnan Metal supply small quantities?
Yes. As an open-die forging shop we run single prototype rings and discs alongside production batches. Send the drawing to sales@steelforgepieces.com and we will confirm feasibility, weight and lead time, usually within one working day.

Request a quotation for AISI 444 forgings

Send the drawing, the quantity and the governing standard, and we will quote our best price. Enquiries are answered within 24 hours, Monday to Saturday, China Standard Time (UTC+8).

Jiangyin Jiangnan Metal Co., Ltd., Open-Die Forging Factory
No.1 Chengxiqiao Road, Zhouzhuang Town, Jiangyin City, Jiangsu Province, China
Tel: +86-189-2135-9659  |  Email: sales@steelforgepieces.com

Email your drawing

References: Cleveland-Cliffs, 444 Stainless Steel product data, May 2021; Metalcor datasheet 1.4521; Virgamet 1.4521 / X2CrMoTi18-2 technical page; AZoM, Grade 444 (UNS S44400); ModulusMetal AISI 444 data sheet; SSINA guidance on chloride stress corrosion cracking.
Compiled by the technical sales department, Jiangyin Jiangnan Metal Co., Ltd. The figures here are for guidance. Certified values for your order are the ones printed on the EN 10204 3.1 certificate supplied with the goods.