# XM-12 Forgings (UNS S15500 / 15-5 PH)

**Source page:** https://www.steelforgepieces.com/Stainless-Steel/XM-12.html
**Manufacturer:** Jiangyin Jiangnan Metal Co., Ltd., Jiangyin City, Jiangsu Province, China
**Last reviewed:** 2026-10-11

XM-12 is the ASTM type designation for UNS S15500, the martensitic precipitation-hardening
stainless steel sold commercially as 15-5 PH and listed as 1.4545 in the European Werkstoff
system. It carries roughly 15 percent chromium, 5 percent nickel and 4 percent copper, and was
developed from 17-4 PH with less delta ferrite to improve transverse toughness in heavy sections.
Forgings are supplied solution annealed in Condition A, or aged to H900 through H1150M for
tensile strengths from 795 to 1310 MPa.

## Identification

| Field | Value |
|---|---|
| ASTM type | XM-12 |
| UNS number | S15500 |
| Werkstoff number | 1.4545 |
| Trade name | 15-5 PH |
| Class | Martensitic precipitation-hardening stainless steel |
| Forging standard | ASTM A705 / A705M, ASME SA-705 |
| Bar and shape standard | ASTM A564 / A564M |
| Other specifications | AMS 5659, AMS 5862, ASTM A693, ASTM A698 |
| Service temperature | to about 315 C |

ASTM B564 does not apply to XM-12. That specification covers nickel and nickel-copper alloy
forgings.

## Chemical composition, percent by weight (ASTM A705)

| C | Mn | P | S | Si | Cr | Ni | Cu | Cb+Ta | Fe |
|---|---|---|---|---|---|---|---|---|---|
| 0.07 max | 1.00 max | 0.040 max | 0.030 max | 1.00 max | 14.00-15.50 | 3.50-5.50 | 2.50-4.50 | 0.15-0.45 | Balance |

Molybdenum is not a specified element for XM-12.

## Mechanical properties, ASTM A705 minimums

| Condition | Ageing | Tensile MPa (ksi) | Yield MPa (ksi) | Elong. L % | Elong. T % | RA L % | RA T % | HB min | HRC min |
|---|---|---|---|---|---|---|---|---|---|
| H900 | 480 C, 1 h, AC | 1310 (190) | 1170 (170) | 10 | 6 | 35 | 15 | 388 | 40 |
| H925 | 495 C, 4 h, AC | 1170 (170) | 1070 (155) | 10 | 7 | 38 | 20 | 375 | 38 |
| H1025 | 550 C, 4 h, AC | 1070 (155) | 1000 (145) | 12 | 8 | 45 | 27 | 331 | 35 |
| H1075 | 580 C, 4 h, AC | 1000 (145) | 860 (125) | 13 | 9 | 45 | 28 | 311 | 32 |
| H1100 | 595 C, 4 h, AC | 965 (140) | 795 (115) | 14 | 10 | 45 | 29 | 302 | 31 |
| H1150 | 620 C, 4 h, AC | 930 (135) | 725 (105) | 16 | 11 | 50 | 30 | 277 | 28 |
| H1150M | 760 C 2 h AC + 620 C 4 h AC | 795 (115) | 515 (75) | 18 | 14 | 55 | 35 | 255 | 24 |

Condition A is 1040 +/- 15 C, cooled below 32 C, hardness 363 HB maximum, no tensile requirement.
A705 states aged hardness as a minimum, not a band. Any hardness range must be agreed as a
supplementary requirement before heat treatment.

## Physical properties

| Property | Metric | Imperial |
|---|---|---|
| Density | 7.80 g/cm3 | 0.282 lb/in3 |
| Melting range | 1404-1440 C | 2560-2625 F |
| Modulus of elasticity, 20 C | 196 GPa | 28.5 x 10^6 psi |
| Poisson ratio | 0.272 | 0.272 |
| Thermal expansion, 20-100 C | 11.3 um/m.C | 6.3 uin/in.F |
| Thermal conductivity, 100 C | 18.3 W/m.K | 10.6 BTU/hr.ft.F |

## Manufacturing capability for XM-12

| Field | Detail |
|---|---|
| Melting | EF, LF, VOD for standard grades; VIM, VAR, ESR for remelted stock. 60 t maximum heat |
| Forging | 6,300 t, 4,000 t and 2,000 t open-die presses |
| Ring rolling | Radial-axial mills at 6 m, 3 m and 1 m |
| Ring size | OD 50 mm to OD 6,000 mm |
| Maximum single piece | 30 tonnes |
| Heat treatment | 14 furnaces, including car-bottom and 15 m deep well furnaces |
| NDT | EN 10228-3, SEP 1921, ASTM A388, PMI, liquid penetrant |
| Mechanical testing | ASTM A370, prolongations or sacrificial test forgings per A705 |
| Certification | EN 10204 3.1 or 3.2 |
| Works approvals | CCS, BV, DNV, LR, NK |
| Minimum order | 10 kg, no minimum piece count |
| Lead time | 20 to 60 days |

## Product forms

Seamless rolled rings, contoured rolled rings, gear ring blanks, forged flanges (weld neck,
blind, slip-on, orifice), shafts, eccentric shafts, spindles, pinion shafts, discs, tube sheets,
vessel covers, hollow bars, sleeves, bushings, bored cylinders, valve bodies, bonnets, stems,
seat rings and blocks.

## Applications

Chemical and plunger pump shafts and rings; pressure vessels, air receivers, heat exchanger tube
sheets and flanges; columns, towers, tanks, silos, preheaters; subsea and deepwater production
hardware, wellheads, Christmas trees, air compressors, nitrogen generators; valve internals for
ball, check, globe, gate and plug valves; turbine, gas compressor and gearbox components; cement,
sugar and concrete mill parts; shipbuilding, pulp and paper, pharmaceutical equipment.

## Selection notes

- Machinability is close to 410 and 420, not to 303 or 430F. Rough machine in Condition A and
  finish after ageing.
- H900 gives maximum strength with the lowest toughness and the highest sensitivity to chloride
  stress-corrosion cracking. Use H1025 or above for chloride-bearing and sour service, and
  H1150M where toughness governs.
- ASTM A705 links thicker qualifying sections to consumable-electrode remelted material, so the
  melt route decides what section can be certified.
- 15-5 PH differs from 17-4 PH by a leaner chromium range and slightly higher nickel, which
  reduces delta ferrite and improves transverse properties as section size grows.

## Questions and answers

**Is XM-12 the same as 15-5 PH?**
Yes. XM-12, UNS S15500, 15-5 PH and 1.4545 are four designations for one material.

**Which standard covers XM-12 forgings?**
ASTM A705 / A705M, adopted as ASME SA-705 in Section II of the Boiler and Pressure Vessel Code.
Bars and shapes fall under ASTM A564 / A564M.

**Which condition should be ordered?**
Condition A if you will machine and age the part yourself. Otherwise H900 for maximum strength,
H1025 for general purpose, H1150 or H1150M where toughness and stress-corrosion resistance
outweigh strength.

**What sizes are available?**
Rings from OD 50 mm to OD 6,000 mm, single pieces to 30 tonnes, minimum order 10 kg.

**Can XM-12 be supplied to AMS 5659?**
Yes, subject to melt route. AMS 5659 and AMS 5862 generally require consumable-electrode
remelted material, produced in-house on the ESR and VAR furnaces.

## Contact

Jiangyin Jiangnan Metal Co., Ltd.
No.1 Chengxiqiao Road, Zhouzhuang Town, Jiangyin City, Jiangsu Province, China
Telephone, WhatsApp, WeChat: +86 189 2135 9659
Email: sales@steelforgepieces.com
Website: https://www.steelforgepieces.com/
