# X8CrMnNi18-8 (W.Nr. 1.3965) Forgings

**X8CrMnNi18-8 is a non-magnetisable austenitic steel with material number 1.3965.** It carries 17.00 to 19.00 % chromium, 7.50 to 9.50 % manganese, 4.50 to 6.50 % nickel and 0.100 to 0.200 % nitrogen, with carbon capped at 0.10 %. Manganese and nitrogen hold the austenite in place of part of the nickel, so the steel keeps a fully austenitic, non-magnetisable structure on a nickel content well below that of a standard 18/8.

Forged by Jiangyin Jiangnan Metal Co., Ltd., an integrated melting works and open-die forge in Zhouzhuang Town, Jiangyin City, Jiangsu Province, China, operating since 1997.

| Field | Detail |
|---|---|
| Grade | X8CrMnNi18-8, also written X8CrMnNi 18 8 |
| Material number | 1.3965 |
| Type | Austenitic chromium-manganese-nickel-nitrogen steel |
| Magnetic behaviour | Non-magnetisable |
| Melting route | EF + LF + VOD; protective-atmosphere ESR on request |
| Maximum single piece | 30 t |
| Maximum rolled ring | 6,000 mm outside diameter |
| Minimum order | 10 kg, no minimum piece count |
| Lead time | 20 to 60 days |
| Ultrasonic testing | EN 10228-3, SEP 1921 or ASTM A388 |
| Certification | EN 10204 3.1 or 3.2 |
| Approvals | CCS, BV, DNV, LR, NK |
| Telephone | +86 189 2135 9659 |
| Email | sales@steelforgepieces.com |
| Page | https://www.steelforgepieces.com/Stainless-Steel/X8CrMnNi18-8.html |

## Chemical composition

Percent by mass, for material number 1.3965.

| Limit | C | Si | Mn | P | S | Cr | Ni | N | Fe |
|---|---|---|---|---|---|---|---|---|---|
| Min | – | – | 7.50 | – | – | 17.00 | 4.50 | 0.100 | Balance |
| Max | 0.10 | 1.00 | 9.50 | 0.045 | 0.030 | 19.00 | 6.50 | 0.200 | Balance |

The binding analysis for a delivered forging is the one printed on its EN 10204 certificate.

### Why the nickel sits below a standard 18/8

A conventional 18/8 steel needs roughly 8 % nickel to keep its structure austenitic at room temperature. In 1.3965 the manganese is lifted to 7.50 to 9.50 % and nitrogen is added at 0.100 to 0.200 %. Both are strong austenite formers, so nickel can come down to 4.50 to 6.50 % while the steel stays austenitic and non-magnetisable. Two consequences follow. Nickel is the most volatile line item in a stainless price and this grade is less exposed to it. And because the structure is held by manganese and nitrogen rather than nickel alone, the grade is specified where a part must not disturb a magnetic field.

## Designations and equivalents

| System | Designation | Confidence |
|---|---|---|
| German name | X8CrMnNi18-8 | Primary designation |
| Werkstoffnummer | 1.3965 | Primary material number |
| AISI / SAE | XM-10; 202 | Published cross-reference |
| UNS | S21900; S20200 | Published cross-reference |
| Trade name | Nitronic 50 or Nitronic 60, depending on source | Sources conflict, confirm before ordering |

Cross-reference tables for 1.3965 do not agree on the Nitronic mapping. A supplier material datasheet gives Nitronic 60 as a special designation, while a machining cutting-data chart maps X8CrMnNi 18-8 to Nitronic 50. Those are two different alloys, so one mapping will be wrong for any given application. We quote and manufacture against the designation and composition limits written on the customer specification, drawing or purchase order, not against a trade name taken from a conversion table. Nitronic is a registered trademark of its owner and appears here only to identify the grade.

## Mechanical properties and delivery condition

Properties follow from delivery condition, section size and test position, so no single published figure holds across all sections. The property set is agreed against the customer specification before manufacture and the measured values are reported on the certificate.

Information needed at enquiry stage: delivery condition, usually solution annealed; required 0.2 % proof strength and tensile strength; elongation and reduction of area; impact energy and test temperature; hardness range; and any magnetic permeability limit together with the measurement method. On non-magnetisable work the permeability limit is often the governing acceptance criterion rather than strength.

Heat treatment is carried out in 14 furnaces on site, including car-bottom furnaces with a working chamber up to 8,000 x 2,000 x 2,000 mm and two well-type furnaces 15,000 mm deep by 1,500 mm diameter for vertical solution treatment and quenching of long shafts.

## Product forms

All items are produced to customer drawing or to finished dimensions with a stated machining allowance. Open-die forging and ring rolling carry no die cost, so single pieces, prototypes and short runs are standard work.

- Seamless rolled rings, rectangular or contoured section
- Upset and punched forged rings, retaining rings, gear ring blanks
- Forged flanges: weld neck, blind, slip-on, socket weld, lap joint, orifice
- Forged round bars, flat bars and square bars
- Solid forged discs, covers and tube sheets
- Stepped shafts, spindles, eccentric shafts, pinion shafts
- Sleeves, bushings, bored cylinders, heavy-wall pipe sections
- Valve bodies, bonnets, blocks, stems and seat rings
- Nozzles, manifolds, blocks, wheels and rolls

### Working envelope

| Product | Limit | Set by |
|---|---|---|
| Rolled rings | up to OD 6,000 mm | 6 m radial-axial ring mill |
| Small rings | from OD 50 mm | Upset and punch route |
| Shafts | up to 14,000 mm turned length | C61160 lathe; 15 m well furnace |
| Discs, tube sheets, blocks | up to 5,000 mm machined diameter | 5,000 mm vertical turning lathe |
| Bored cylinders | 1,600 mm dia x 10,000 mm | CNC deep-hole drilling machine |
| Single piece weight | up to 30,000 kg | 60 t heat size; 6,300 t press |

These are plant limits. The practical limit for a given 1.3965 part also depends on required forging reduction and heat treatment response.

## Applications

The property that drives most enquiries is that this steel will not become magnetised. Corrosion resistance comes from 17 to 19 % chromium and strength is supported by the nitrogen addition.

- **Low magnetic permeability work.** Housings, sleeves, rings and shafts for instrumentation, measurement and sensing equipment, electrical and generator components, downhole and subsea assemblies where a ferromagnetic part would disturb a reading.
- **Oil, gas and offshore.** Rings, flanges, bushings, sleeves and shafts for onshore and offshore production equipment, subsea and deepwater systems, compressor and generator components.
- **Chemical and process plant.** Flanges, tube sheets, forged tubes and heat exchanger components, separator parts, pump and compressor parts.
- **Valves and flow control.** Bodies, bonnets, seat rings, stems and blocks for ball, gate, globe, check, plug and strainer applications.
- **Rotating and power transmission equipment.** Shafts, spindles, bars, ring and gear blanks for gearboxes, turbines, gas compressors and heavy machinery.
- **Food, pharmaceutical and water.** Food processing and storage equipment, pharmaceutical production, pulp and paper plant, desalination and water treatment.

## Manufacturing route

**Melting and nitrogen control.** Standard route is electric arc furnace, ladle refining, then vacuum oxygen decarburisation, the step that lets carbon be held at 0.10 % maximum while nitrogen is brought into the 0.100 to 0.200 % band. Maximum heat size 60 t. Where a specification calls for improved cleanliness or tighter structural homogeneity, the grade can be remelted on the protective-atmosphere electroslag furnaces used for nitrogen-alloyed steels. Remelting affects price and lead time and should be stated at enquiry stage.

**Forging and ring rolling.** Open-die presses of 6,300 t, 4,000 t and 2,000 t, five hammers from 750 kg to 5 t, radial-axial ring mills at 1 m, 3 m and 6 m. Forging reduction ratio is set against the customer specification.

**Heat treatment.** 14 furnaces covering solution annealing, ageing, annealing and stress relief, including two 15 m deep well-type furnaces.

**Machining, testing and certification.** Vertical lathes to 5,000 mm swing, horizontal lathes to 14,000 mm between centres, CNC lathes and a deep-hole drilling machine. Parts supplied as forged, proof machined for inspection, or finish machined. Ultrasonic testing to EN 10228-3, SEP 1921 or ASTM A388 at the acceptance class on the order. Certificates to EN 10204 3.1, or 3.2 witnessed by BV, DNV, LR, SGS, TUV or the customer's own inspector. The works holds CCS, BV, DNV, LR and NK approvals.

## Manufacturer

Jiangyin Jiangnan Metal Co., Ltd. is an integrated steel melting works, open-die forge and ring rolling mill at No.1 Chengxiqiao Road, Zhouzhuang Town, Jiangyin City, Jiangsu Province, China, in operation since 1997. 460 people work at the plant, including 9 senior engineers, 32 intermediate engineers and 140 technicians. Melting covers EF, LF, VOD, VIM, VAR and ESR up to 60 t heats. Forging runs to a 6,300 t press and a 6 m ring mill with a 30 t maximum single piece. The works holds CCS, BV, DNV, LR and NK approvals and ships to North America, Europe, the Middle East and Asia-Pacific. More than 300 grades are forged on site.

## Questions

**What is X8CrMnNi18-8?** A non-magnetisable austenitic steel carrying material number 1.3965, containing 17.00 to 19.00 % chromium, 7.50 to 9.50 % manganese, 4.50 to 6.50 % nickel and 0.100 to 0.200 % nitrogen, with carbon at 0.10 % maximum.

**What is the material number?** 1.3965. A drawing quoting either designation refers to the same steel.

**Is it magnetic?** No. It is classified as a non-magnetisable steel. Any numerical permeability limit should be stated on the enquiry along with the measurement method.

**Why does it contain less nickel than a standard 18/8 steel?** Manganese at 7.50 to 9.50 % and nitrogen at 0.100 to 0.200 % are strong austenite formers and take over part of the role nickel plays in a conventional 18/8, so nickel can sit at 4.50 to 6.50 % without the structure changing.

**Is it the same as Nitronic 50 or Nitronic 60?** Published sources disagree, so this cannot be answered with a clean yes. The consistently published cross-references are AISI and SAE XM-10 and 202, and UNS S21900 and S20200.

**What are the mechanical properties?** They depend on delivery condition, section size and test position, so no universal figure is published. Requirements are confirmed in writing before order and measured values appear on the certificate.

**What sizes can be forged?** Rolled rings to 6,000 mm outside diameter, shafts to 14,000 mm turned length, discs and tube sheets to 5,000 mm machined diameter, bored cylinders to 1,600 mm diameter by 10,000 mm, single pieces to 30 t, small rings from 50 mm outside diameter.

**Minimum order and lead time?** 10 kg minimum with no minimum piece count. Lead time 20 to 60 days.

**What certification is supplied?** EN 10204 3.1, or EN 10204 3.2 witnessed by a third-party inspection body.

**Who supplies this grade?** Jiangyin Jiangnan Metal Co., Ltd., No.1 Chengxiqiao Road, Zhouzhuang Town, Jiangyin City, Jiangsu Province, China. Telephone +86 189 2135 9659, email sales@steelforgepieces.com.

## Related grades

Nitronic 30, Nitronic 32, Nitronic 33, Nitronic 40, Nitronic 50, Nitronic 60, 904L, A182-F44, A182-F51, A182-F53, A182-F55, A286, 17-4 PH.

---

Technical data identifies the grade and is given in good faith. Binding values for any delivered forging are those on its material certificate. Nitronic is a registered trademark of its owner, used here for cross-identification only. Page reviewed 11 October 2026. Copyright 1997 to 2026 Jiangyin Jiangnan Metal Co., Ltd.
