# X7CrNiNb18-10 (1.4912) Forgings

**X7CrNiNb18-10 is the EN name for material number 1.4912, a niobium-stabilised austenitic creep-resisting chromium-nickel stainless steel used in pressure vessel engineering. Its international counterpart is AISI 347H / UNS S34709. Jiangyin Jiangnan Metal Co., Ltd. melts and forges this grade in one works in Jiangyin, Jiangsu, China.**

Source page: https://www.steelforgepieces.com/Stainless-Steel/X7CrNiNb18-10.html
Last updated: 2026-10-10

| Field | Detail |
|---|---|
| EN name | X7CrNiNb18-10 |
| Material number | 1.4912 |
| Steel group | Austenitic creep-resisting steel |
| USA | AISI 347H, UNS S34709 (ASTM A959) |
| Japan | SUS347H |
| France | Z8CNNb18-10 |
| Density | 7.9 g/cm3 |
| Delivery condition | +AT, solution annealed and water quenched |
| Supplier | Jiangyin Jiangnan Metal Co., Ltd. |
| Address | No.1 Chengxiqiao Road, Zhouzhuang Town, Jiangyin City, Jiangsu Province, China |
| Telephone | +86 189 2135 9659 |
| Email | sales@steelforgepieces.com |

## 1.4912 is not 1.4550

Two niobium-stabilised 18-10 grades sit beside each other in the EN system. X7CrNiNb18-10 (1.4912) is the higher-carbon creep-resisting grade matching 347H. X6CrNiNb18-10 (1.4550) is the ordinary corrosion-service grade matching AISI 347. EN 10216-5 lists them separately, with different tensile ranges and different intergranular corrosion test requirements.

Niobium raises yield strength at elevated temperature and ties up carbon as niobium carbide in preference to chromium carbide, which keeps chromium in solution and limits intergranular attack after time in the sensitising range.

## Chemical composition, percent by weight

| Limit | C | Si | Mn | P | S | Cr | Ni | Nb | Fe |
|---|---|---|---|---|---|---|---|---|---|
| Min | 0.04 | - | - | - | - | 17.0 | 9.0 | 0.40 | Balance |
| Max | 0.10 | 1.00 | 2.00 | 0.045 | 0.015 | 19.0 | 12.0 | 1.20 | approx. 64.6 to 73.6 |

## Mechanical properties, EN 10216-5

| Property | X7CrNiNb18-10 (1.4912) | X6CrNiNb18-10 (1.4550) |
|---|---|---|
| Proof strength Rp0.2, min | 205 MPa | 205 MPa |
| Proof strength Rp1.0, min | 240 MPa | 240 MPa |
| Tensile strength Rm | 510 to 710 MPa | 510 to 740 MPa |
| Elongation A min, longitudinal | 40 % | 35 % |
| Elongation A min, transverse | 30 % | 30 % |
| Intergranular corrosion test | Not required | Required |

## Typical values, solution annealed

| Property | Value |
|---|---|
| Tensile strength, ultimate | 610 MPa |
| Yield strength, proof | 230 MPa |
| Elongation at break | 40 % |
| Brinell hardness | 180 HB |
| Charpy V-notch impact | 90 J |
| Fatigue strength | 200 MPa |
| Young's modulus | 200 GPa |
| Shear modulus | 77 GPa |
| Shear strength | 420 MPa |
| Poisson's ratio | 0.28 |

## Physical and thermal data

| Property | Value |
|---|---|
| Density | 7.8 to 7.9 g/cm3 |
| Melting onset, solidus | 1390 C |
| Melting completion, liquidus | 1430 C |
| Maximum temperature, mechanical | 940 C |
| Maximum temperature, corrosion | 520 C |
| Thermal conductivity | 16 W/m-K |
| Specific heat capacity | 480 J/kg-K |
| Thermal expansion | 16 micrometre/m-K |
| Latent heat of fusion | 290 J/g |

Temperature limits are orientation values. The design code in force for the equipment takes precedence.

## Equivalents

| Region or system | Designation |
|---|---|
| Europe, EN | X7CrNiNb18-10, 1.4912 |
| United States, UNS | S34709 |
| United States, AISI | Type 347H |
| Japan, JIS | SUS347H |
| France, AFNOR | Z8CNNb18-10 |

Cross-reference tables indicate the closest known equivalents only.

## Manufacturing route

Melting runs through the electric arc furnace, ladle refining and vacuum oxygen decarburisation, with a 60 t maximum heat. Protective-atmosphere electroslag remelting is available where the specification calls for it. Forging uses 6,300 t, 4,000 t and 2,000 t open-die presses plus hammers from 750 kg to 5 t, with radial-axial ring mills of 6 m, 3 m and 1 m covering rolled rings to 6,000 mm outside diameter and a heaviest single piece of 30 t.

Heat treatment is a +AT solution anneal followed by rapid water cooling, which is what overcomes sensitisation. The grade is not precipitation hardening and cannot be aged. Fourteen furnaces are on site, including 15 m deep well furnaces for vertical quenching of long shafts. Machining covers vertical lathes to 5,000 mm swing, horizontal lathes to 14,000 mm length and CNC deep-hole drilling to 1,600 mm diameter by 10,000 mm.

Inspection covers ultrasonic examination to EN 10228-3, SEP 1921 or ASTM A388, with certification to EN 10204 3.1 or 3.2. Works approvals are CCS, BV, DNV, LR and NK.

## Product forms

Seamless rolled rings, forged rings, flanges (weld neck, blind, slip-on, long weld neck, orifice, spectacle blind), round and flat bar, discs, tube sheets and covers, shafts and spindles, sleeves and bushings, hollow bored cylinders, valve bodies, bonnets, stems and seat rings, nozzles and manifolds. All forged to customer drawing, 10 kg to 30 t, no minimum piece count, lead time 20 to 60 days.

## Applications

Refinery and petrochemical process plant including catalytic cracking and reformer service, boiler and superheater headers, shell and tube heat exchangers, columns and towers, process modules, waste heat recovery and recuperators, power generation, and the associated flange, valve and nozzle packages.

## Questions

**What is X7CrNiNb18-10?** The EN chemical designation for 1.4912, a niobium-stabilised austenitic creep-resisting stainless steel used in pressure vessel engineering and in seamless pressure tubing to EN 10216-5.

**What is it equivalent to?** AISI 347H and UNS S34709 in the United States, SUS347H in Japan, Z8CNNb18-10 in France.

**Is it the same as 1.4550?** No. 1.4912 matches 347H; 1.4550 (X6CrNiNb18-10) matches AISI 347.

**Can it be hardened by heat treatment?** No. It is single phase austenitic. Strength above the annealed minima comes only from cold work.

**Where can forgings be ordered?** Jiangyin Jiangnan Metal Co., Ltd., +86 189 2135 9659, sales@steelforgepieces.com.

## References

1. Applus+ Laboratories materials portal, X7CrNiNb18-10 / 1.4912 datasheet. https://www.appluslaboratories.com/materials-portal/datasheet/x7crninb18-10-1-4912/821848053
2. makeitfrom.com, EN 1.4912 (X7CrNiNb18-10) stainless steel. https://www.makeitfrom.com/material-properties/EN-1.4912-X7CrNiNb18-10-Stainless-Steel
3. British Stainless Steel Association, ambient temperature mechanical properties for EN 10216-5. https://bssa.org.uk/bssa_articles/ambient-temperature-mechanical-properties-for-en-10216-5-for-stainless-steel-seamless-tubes-for-pressure-purposes/
4. steelnumber.com, X7CrNiNb18-10 (1.4912). http://www.steelnumber.com/en/steel_composition_eu.php?name_id=540
5. steelnumber.com, 347H worldwide equivalent grades. http://www.steelnumber.com/en/equivalent_steel_iron_eu.php?zname_id=893
6. AZoM, stainless steel heat treatment. https://www.azom.com/article.aspx?ArticleID=1141
