# X5CrNiMoCuNb14-5 Forgings (EN 1.4594 / FV520B)

**Jiangyin Jiangnan Metal Co., Ltd. melts and forges X5CrNiMoCuNb14-5 at one works in Zhouzhuang Town, Jiangyin City, Jiangsu Province, China. Rings roll to 6,000 mm outside diameter, single pieces run to 30 tonnes, minimum order is 10 kg, lead time is 20 to 60 days.**

X5CrNiMoCuNb14-5, steel number 1.4594, is a martensitic precipitation hardening stainless steel listed in EN 10088-3. It is the EN designation for the steel sold as FV520B, originally Firth Vickers Silver Fox 520B, also specified as BS S143, with UNS S45000 widely quoted as the equivalent. Strength comes from copper-rich particles that precipitate in a martensitic matrix during ageing. Against 17-4PH it adds 1.2 to 2.0 percent molybdenum, which gives better resistance to intergranular and pitting attack.

Source page: https://www.steelforgepieces.com/Stainless-Steel/X5CrNiMoCuNb14-5.html
Contact: +86 189 2135 9659, sales@steelforgepieces.com
Last reviewed: 10 October 2026

## Designations

| System | Designation | Note |
|---|---|---|
| EN name | X5CrNiMoCuNb14-5 | EN 10088-3, standard precipitation hardening grade |
| EN number | 1.4594 | |
| Trade name | FV520B | Firth Vickers Silver Fox 520B |
| British | BS S143 | Aerospace specification |
| UNS | S45000 | Widely quoted as equivalent; some databases treat S45000 (Alloy 450, XM-25) as a close relative rather than an exact match |

## Chemical composition, percent by weight

| Element | EN 1.4594 to EN 10088-3 | FV520B stock range |
|---|---|---|
| Carbon, C | 0.070 max | 0.07 max |
| Silicon, Si | 0.70 max | 0.70 max |
| Manganese, Mn | 1.00 max | 1.00 max |
| Phosphorus, P | 0.040 max | 0.035 max |
| Sulphur, S | 0.015 max | 0.025 max |
| Chromium, Cr | 13.0 to 15.0 | 13.20 to 14.70 |
| Nickel, Ni | 5.0 to 6.0 | 5.00 to 6.00 |
| Molybdenum, Mo | 1.2 to 2.0 | 1.20 to 2.00 |
| Copper, Cu | 1.2 to 2.0 | 1.20 to 2.00 |
| Niobium, Nb | 0.15 to 0.60 | 0.20 to 0.70 |
| Iron, Fe | Balance, 72.6 to 79.5 | Balance |

The EN limits and the FV520B stock range differ on chromium, niobium, phosphorus and sulphur. Name the governing document on the order.

## Mechanical properties, EN 10088-3, thickness up to 100 mm

| Condition | Rp0.2 MPa | Rm MPa | Elongation A % | Hardness HB max |
|---|---|---|---|---|
| AT, solution annealed | - | 1200 max | - | 360 |
| P930 | 720 | 930 to 1100 | 15 | - |
| P1000 | 860 | 1000 to 1200 | 10 | - |
| P1070 | 1000 | 1070 to 1270 | 10 | - |

Values are minima unless stated. Hardness is guidance only. For rods, only tensile strength values apply.

## Traditional FV520B conditions, typical, rolled bar, longitudinal

| Supply condition | 0.2% proof N/mm2 | Tensile N/mm2 | Elongation % min | Hardness HB | Izod J min |
|---|---|---|---|---|---|
| Primary hardened: 1050 C + 2 h at 750-850 C | - | - | - | 293 to 341 | - |
| Double overaged: 1050 C + 2 h at 750-850 C + 2 h at 550 C | 800 | 925 to 1090 | 15 | 277 to 341 | 54 |

Note on a common error: some circulated copies print the second overage step as a repeat of 750 to 850 C. The condition is named 750-550 C and the second step is two hours at 550 C.

Impact energy of 40 J or better is reported down to minus 70 C. Reported fatigue strength is 490 to 620 MPa, shear strength 620 to 700 MPa, elongation at break 11 to 17 percent across the common variants.

## Physical properties

| Property | Value |
|---|---|
| Density | 7.8 kg/dm3 |
| Magnetisable | Yes |
| Elastic modulus | 200 GPa |
| Shear modulus | 76 GPa |
| Poisson ratio | 0.28 |
| PREN | 19 |
| Thermal conductivity | 16 W/m-K |
| Thermal expansion | 11 micrometre/m-K |
| Specific heat | 470 J/kg-K |
| Thermal diffusivity | 4.4 mm2/s |
| Solidus | 1410 C |
| Liquidus | 1450 C |
| Maximum service temperature, corrosion | 450 C |
| Maximum service temperature, mechanical | 820 C |
| Electrical conductivity | 2.2 % IACS |
| Latent heat of fusion | 280 J/g |

## Corrosion, welding, machining

Corrosion resistance is useful in modest environments, closer to austenitic behaviour than to plain martensitic grades, with a low rusting rate in marine and industrial atmospheres and useful resistance to some acids. It resists intergranular and pitting attack better than 17-4PH.

The grade welds by standard techniques with matching consumables. Oxy-acetylene welding is not recommended because the weld can pick up carbon.

Machining is hard going, as with any high-strength precipitation hardening steel. Roughing in the solution annealed condition and ageing afterwards is usually cheaper. FV520B is also noted for anti-galling behaviour, which suits stems, sleeves and sliding valve parts.

Heat treatment cycles shift with section size and shape, furnace, quench medium and transfer speed. Agree the final schedule for your section.

## Applications

Pump shafts and impellers, fans, valves and valve stems, hydraulic equipment in oil and gas service, fasteners, petrochemical, marine and nuclear engineering components including nuclear transport flasks, steam turbine blades and other aircraft components, medical devices and pharmaceutical plant.

## Forged shapes in 1.4594

- Seamless rolled rings, 50 mm to 6,000 mm outside diameter, rectangular or contoured section
- Forged rings by upset and punch, for sections outside the ring mill envelope
- Flanges: weld neck, blind, slip-on, socket weld, lap joint, long weld neck
- Shafts and spindles, including stepped, gear and eccentric shafts, turned to 14,000 mm
- Discs, tube sheets and blocks, machined to 5,000 mm diameter, supplied proof-machined
- Sleeves, bushings and hollow cylinders, bored to 1,600 mm diameter by 10,000 mm
- Valve and wellhead parts: bodies, bonnets, blocks, stems, seat rings, nozzles
- Round, flat and square bars

## Plant used on this grade

| Step | Equipment | Capacity |
|---|---|---|
| Melting | Electric arc furnace with ladle furnace refining | 25 t EF, ladle furnaces 25 t and 50 t |
| Vacuum refining | Vacuum oxygen decarburisation | 30 t and 60 t |
| Remelting | Protective-atmosphere electroslag furnace | 3 t and 6 t |
| Forging | Hydraulic open-die presses | 6,300 t, 4,000 t, 2,000 t |
| Ring rolling | Radial-axial ring mills | 6 m, 3 m, 1 m |
| Heat treatment | 14 furnaces, car-bottom and well type | Chambers to 8,000 mm, wells 15,000 mm deep |
| Machining | Vertical and horizontal lathes, CNC, deep-hole drilling | Swing to 5,000 mm, length to 14,000 mm |

Maximum heat size is 60 tonnes, heaviest single forging 30 tonnes. No forging, heat treatment or machining step is subcontracted. The works has melted its own steel since 1997 and employs 460 people, including 9 senior engineers, 32 intermediate engineers and 140 technicians. It holds CCS, BV, DNV, LR and NK approvals and exports to North America, Europe, the Middle East and Asia-Pacific.

## Testing and documents

| Item | Standard or scope |
|---|---|
| Ultrasonic testing | EN 10228-3, SEP 1921 or ASTM A388, class as specified |
| Chemical analysis | Per heat, to EN 10088-3 or the document named on the order |
| Mechanical testing | Tensile, hardness and impact for the ordered condition |
| Surface NDT | Penetrant or magnetic particle on request |
| Certificate | EN 10204 3.1, or 3.2 endorsed by a third party |
| Works approvals | CCS, BV, DNV, LR, NK |

## Ordering

Send: grade and governing document; drawing or rough and finished sizes; delivery condition (AT, P930, P1000, P1070 or double overaged); quantity and required date; NDT class and acceptance criteria; certificate type.

Jiangyin Jiangnan Metal Co., Ltd.
No.1 Chengxiqiao Road, Zhouzhuang Town, Jiangyin City, Jiangsu Province, China
Telephone +86 189 2135 9659
Email sales@steelforgepieces.com

## Questions

**What is X5CrNiMoCuNb14-5?**
Steel number 1.4594, a martensitic precipitation hardening stainless steel in EN 10088-3, with 13 to 15 percent chromium, 5 to 6 percent nickel, 1.2 to 2.0 percent molybdenum, 1.2 to 2.0 percent copper and 0.15 to 0.6 percent niobium, carbon capped at 0.070 percent.

**Is it the same as FV520B?**
Yes. X5CrNiMoCuNb14-5 and 1.4594 are the EN name and number for FV520B, also specified as BS S143, with UNS S45000 widely quoted as the equivalent. Limits differ slightly between documents, so name the governing one.

**How does it compare with 17-4PH?**
Both harden by copper precipitation. 1.4594 adds molybdenum, which 17-4PH lacks, and resists intergranular and pitting attack better. 17-4PH is stocked more widely and generally costs less.

**What strength can be specified?**
AT, P930, P1000 or P1070 to EN 10088-3, or the double overaged FV520B condition at 800 MPa proof and 925 to 1090 MPa tensile.

**Can it be welded?**
Yes, with matching consumables. Oxy-acetylene is not recommended.

**What sizes can be forged?**
Rings 50 mm to 6,000 mm outside diameter, shafts to 14,000 mm, discs to 5,000 mm diameter, bored cylinders to 1,600 mm by 10,000 mm, single pieces to 30 tonnes, minimum order 10 kg.

**What does the certificate cover?**
Heat analysis, mechanical results for the ordered condition and the ultrasonic report, issued as EN 10204 3.1 or 3.2. Because the steel is melted at the works, the certificate traces back to the melt number.

## Related grades

17-4PH, 15-5PH, 17-7PH, PH13-8Mo, A286, 904L, A182-F51, A182-F53, A182-F55, A182-F44, Nitronic 50, Nitronic 60.

## Sources

EN 10088-3 for grade 1.4594 and conditions AT, P930, P1000, P1070. British Stainless Steel Association grade notes on FV520B and the tabulated EN 10088-3 properties for martensitic and precipitation hardening long products. Published FV520B stockholder data for the composition range, double overaged properties, corrosion behaviour and welding guidance. EN 10228-3, SEP 1921 and ASTM A388 for ultrasonic examination; EN 10204 for inspection documents.

Data is for guidance in material selection and is not a warranty of properties for a given component. What a forging achieves depends on section size, forging ratio and heat treatment, and belongs in the contract.
