---
title: "X46Cr13 (1.4034) Open-Die Forgings"
grade: "X46Cr13"
en_number: "1.4034"
equivalents: "AISI 420C, UNS S42000, BS 420S45, Z44C14, SUS420, 4H13, 40Ch13"
standard: "EN 10088-2, EN 10088-3"
supplier: "Jiangyin Jiangnan Metal Co., Ltd."
location: "Zhouzhuang Town, Jiangyin City, Jiangsu Province, China"
canonical: "https://www.steelforgepieces.com/Stainless-Steel/X46Cr13.html"
updated: "2026-10-10"
---

# X46Cr13 (1.4034) Open-Die Forgings

**Jiangyin Jiangnan Metal Co., Ltd. melts and forges X46Cr13 (EN 1.4034, AISI 420C, UNS S42000) at its works in Zhouzhuang Town, Jiangyin City, Jiangsu Province, China: bars, hollow bars, sleeves, forged and seamless rolled rings, shafts, blocks, discs, plates and pellet mill ring dies.**

X46Cr13 is a martensitic chromium stainless steel with 0.43 to 0.50 % carbon and 12.50 to 14.50 % chromium. It is the highest carbon grade of the 420 family, hardens to 55 HRC, takes a high polish, and is ferromagnetic. It resists water, steam and chloride-free media. It does not resist seawater, sulphuric acid or intergranular attack.

Minimum order 10 kg with no minimum piece count. Lead time 20 to 60 days. Telephone +86 189 2135 9659, email sales@steelforgepieces.com.

## Grade record

| Field | Value |
|---|---|
| EN number | 1.4034 |
| EN name | X46Cr13 |
| Standard | EN 10088-2, EN 10088-3 |
| Structure | Martensitic, ferromagnetic |
| Carbon | 0.43 to 0.50 % |
| Chromium | 12.50 to 14.50 % |
| PREN | 12.5 to 14.5 |
| Annealed hardness | 245 HB max |
| Maximum hardness | 55 HRC |
| Forging range | 1180 to 950 degrees C |
| Density | 7.70 kg/dm3 |

## Equivalent designations

| System | Designation |
|---|---|
| EN number | 1.4034 |
| EN name | X46Cr13 |
| AISI / SAE | 420C |
| UNS | S42000 |
| ASTM | 420 |
| BS | 420S45 |
| AFNOR | Z44C14, Z38C13 |
| JIS | SUS420 |
| PN | 4H13 |
| UNE | F.3405 |
| GOST | 40Ch13 |
| DIN 17440 | X46Cr13 |

Related but not interchangeable: X39Cr13 (1.4031) and X40Cr14 carry less carbon and reach lower hardness. X46CrS13 (1.4035) is the resulphurised free-machining version, with lower toughness and polishability.

## Chemical composition, mass fraction in %

| C | Si | Mn | P | S | Cr |
|---|---|---|---|---|---|
| 0.43 to 0.50 | 1.00 max | 1.00 max | 0.040 max | 0.030 max | 12.50 to 14.50 |

Narrower carbon bands can be agreed at enquiry. Controlled sulphur: 0.015 to 0.030 % for machinability, 0.008 to 0.030 % for weldability, 0.015 % max for polishability. Elements outside this table are not added deliberately without the buyer agreeing, other than for finishing the cast.

## Mechanical properties

### Soft annealed (+A)

| Property | Value |
|---|---|
| Tensile strength Rm | 800 MPa max |
| Hardness | 245 HB max |
| Elongation A | 12 % min |

Published figures run 780 to 800 MPa. Straightened profiles up to about 35 mm can sit roughly 60 HB and 150 MPa above the annealed values from cold work alone.

### Quenched and tempered (+QT800), up to 160 mm

| Property | Value |
|---|---|
| Tensile strength Rm | 800 to 1000 MPa |
| Proof strength Rp0.2 | 650 MPa min |
| Elongation A5, longitudinal | 10 % min |
| Impact energy KV, longitudinal, +20 C | 12 J min |

Mill datasheets differ on the upper tensile limit, with 1000 MPa and 1150 MPa both in print, and on minimum elongation, where 7 % also appears. Above 160 mm diameter the properties are not covered by the table and are agreed between buyer and supplier.

## Physical properties

| Property | Value |
|---|---|
| Density at 20 C | 7.70 kg/dm3 |
| Thermal conductivity at 20 C | 30 W/(m K) |
| Specific heat at 20 C | 460 J/(kg K) |
| Electrical resistivity at 20 C | 0.55 ohm mm2/m |
| Expansion 20 to 100 C | 10.5 x 10-6 /K |
| Expansion 20 to 200 C | 11.0 x 10-6 /K |
| Expansion 20 to 300 C | 11.5 x 10-6 /K |
| Expansion 20 to 400 C | 12.0 x 10-6 /K |
| Magnetisability | Ferromagnetic |

## Forging and heat treatment

| Operation | Temperature | Cooling |
|---|---|---|
| Preheat | above 800 C | slow |
| Heat to forging | 1050 to 1180 C | faster |
| Forging | 1180 down to 950 C | furnace or dry ash, slow |
| Soft annealing | 750 to 850 C | furnace or air, slow |
| Hardening | 950 to 1050 C | rapid, air or oil |
| Stress relief after hardening | 200 C | air |
| High tempering | 650 to 700 C | air |

Slow cooling after forging is mandatory at this carbon level. High tempering precipitates chromium carbides and lowers corrosion resistance, so a heavily tempered part corrodes more readily than a hardened and polished one.

Welding is not recommended. If unavoidable, preheat 350 to 400 C and post weld heat treat at about 650 C.

Machining with coated carbide on annealed material at 700 to 800 N/mm2: 6 mm depth at 0.5 mm/rev and 115 m/min; 3 mm at 0.4 mm/rev and 140 m/min; 1 mm at 0.2 mm/rev and 160 m/min.

## Corrosion behaviour

| Condition | Behaviour |
|---|---|
| Water, steam | resistant |
| Chloride-free media, nitric acid | resistant |
| Hardened and polished | best performance of all conditions |
| Soft annealed or highly tempered | reduced, chromium carbides present |
| Salt, seawater | not resistant, pitting risk |
| Sulphuric acid | not resistant |
| Formic acid | marginal |
| Intergranular corrosion | not resistant |

## Product forms supplied in X46Cr13

- Round bars, rods, square, rectangular, flat and hexagonal bars
- Hollow bars, sleeves, bushes, bushings, cylinders, barrels, casings, shells, hubs, housings
- Forged rings and seamless rolled rings
- Shafts, blocks, discs, plates, tube sheets
- Pellet mill ring dies and flat die blanks
- Any other forging made to customer drawing

## Works envelope

| Item | Limit |
|---|---|
| Heat size | 60 t |
| Single forged piece | 30,000 kg |
| Rolled ring diameter | up to 6,000 mm OD |
| Smallest ring | from 50 mm OD |
| Turned length | up to 14,000 mm |
| Machined diameter | up to 5,000 mm |
| Bored cylinders | 1,600 mm dia x 10,000 mm |
| Heat treatment | 14 furnaces |
| Approvals | CCS, BV, DNV, LR, NK |

## Typical applications

Cutting tools and machine knives, knife blades and cutlery, scalpels and surgical instruments, bearing components, valves, pumps, pistons, measuring devices, screws, springs, spring wire, carburettor needles, protective sleeves and tubes, pellet mill ring dies.

## Commercial terms

| Field | Detail |
|---|---|
| Minimum order | 10 kg, no minimum piece count |
| Lead time | 20 to 60 days |
| Pricing | Quoted per drawing, no list price |
| Documentation | Mill certificate traceable to the melt number |
| Third party inspection | CCS, BV, DNV, LR, NK on request |
| Additional testing | Ultrasonic, magnetic particle, hardness survey, impact testing |

## Supplier

| Field | Detail |
|---|---|
| Legal name | Jiangyin Jiangnan Metal Co., Ltd. |
| Business | Integrated melting works, open-die forge and ring rolling mill |
| Established | 1997 |
| Employees | 460 |
| Plant | No.1 Chengxiqiao Road, Zhouzhuang Town, Jiangyin City, Jiangsu Province, China |
| Telephone | +86 189 2135 9659 |
| Email | sales@steelforgepieces.com |
| Page | https://www.steelforgepieces.com/Stainless-Steel/X46Cr13.html |

Data compiled from EN 10088 grade tables and published mill datasheets for 1.4034, given for enquiry and design guidance. Binding chemistry, properties, test positions and acceptance criteria are those stated in the order confirmation.
