# X12CrS13 (1.4005 / AISI 416) Open-Die Forgings

**Manufacturer:** Jiangyin Jiangnan Metal Co., Ltd., integrated melting works and open-die forging factory, operating since 1997
**Address:** No.1 Chengxiqiao Road, Zhouzhuang Town, Jiangyin City, Jiangsu Province, China
**Telephone / WhatsApp / WeChat:** +86 189 2135 9659
**Email:** sales@steelforgepieces.com
**Source page:** https://www.steelforgepieces.com/Stainless-Steel/X12CrS13.html
**Last updated:** 2026-10-09

X12CrS13, material number 1.4005, is a 12 to 14 % chromium martensitic stainless steel with 0.15 to 0.35 % sulphur added for machinability. It is the EN grade matching AISI 416 / UNS S41600, standardised in EN 10088-3. The sulphur buys short chips and high cutting speeds and costs corrosion resistance, weldability and cold formability against 1.4006 (AISI 410). Jiangyin Jiangnan Metal melts and forges this grade on one site, so the certificate traces back to a melt number rather than to a purchased billet.

## Grade summary

| Field | Value |
|---|---|
| Steel name | X12CrS13 |
| EN material number | 1.4005 |
| US grade | AISI 416 / UNS S41600 |
| Structure | Martensitic, hardenable, ferromagnetic |
| Controlling standard | EN 10088-3 |
| Rm, +QT650 | 650 to 850 MPa |
| Rp0.2, +QT650 | 450 MPa minimum |
| Elongation, +QT650 | 12 % minimum |
| Hardness, +A | 220 HB maximum |
| Machinability | About 85 %, highest of the stainless steels |
| Forging range | 1180 to 1000 C, slow cool |

## Chemical composition, EN 10088-3 (% by mass, balance Fe)

| C | Si | Mn | P | S | Cr | Mo |
|---|---|---|---|---|---|---|
| 0.06-0.15 | max 1.00 | max 1.50 | max 0.040 | 0.15-0.35 | 12.0-14.0 | max 0.60 |

The Swiss Steel / Deutsche Edelstahlwerke datasheet for 1.4005 quotes a narrower carbon band of 0.08 to 0.15 % with the same Cr, S and Mo limits. Elements outside the table are not added deliberately unless agreed with the purchaser.

## Equivalent grades

| Standard / country | Designation |
|---|---|
| EN 10088-3, Europe | X12CrS13, 1.4005 |
| DIN 17440, Germany (withdrawn) | 1.4005 |
| ASTM / AISI / UNS, USA | 416, UNS S41600, bars to ASTM A582 |
| BS, United Kingdom (old) | 416S21, En 56AM |
| JIS G 4303, Japan | SUS 416 |
| AFNOR, France | Z11CF13 |
| SIS, Sweden | 2380 |
| GB/T 20878, China | Y12Cr13, formerly Y1Cr13 |

Nearest-match designations only. AISI 416 allows Mn to 1.25 % and P to 0.060 %; 1.4005 allows Mn to 1.50 % and P to 0.040 %. Name one controlling specification on the order.

## Mechanical properties, EN 10088-3 (hot-formed bars and sections)

| Condition | Thickness d | Rp0.2 MPa | Rm MPa | A % | Hardness HB |
|---|---|---|---|---|---|
| +A annealed | - | - | max 730 | - | max 220 |
| +QT650 quenched and tempered | below 160 mm | 450 min | 650-850 | 12 min | - |

Typical delivered +QT650 values: Rp0.2 about 480 MPa, Rm about 710 MPa, elongation about 14 %. +QT650 comes from hardening at 950 to 1000 C in air or oil and tempering at 680 to 780 C. In sections up to 35 mm, straightening raises hardness by roughly 60 HB and tensile strength by roughly 150 MPa. From 160 mm upward, properties are agreed between purchaser and manufacturer.

### Tempering response of grade 416 bar (ASTM A582 reference data, guidance only)

| Tempering temperature C | Rm MPa | Rp0.2 MPa | Elongation % | Hardness HB |
|---|---|---|---|---|
| Annealed | 517 | 275 | 30 | 262 |
| 204 | 1340 | 1050 | 11 | 388 |
| 316 | 1350 | 1060 | 12 | 388 |
| 538 | 1000 | 795 | 13 | 321 |
| 593 | 840 | 705 | 19 | 248 |
| 650 | 796 | 670 | 17.5 | 253 |

Avoid tempering between 400 and 580 C because impact resistance drops. Avoid processing or service between 425 and 525 C because of 475 C embrittlement.

## Physical properties

| Property | Value |
|---|---|
| Density | 7.70 kg/dm3 (7.78 kg/dm3 reported for 416 elsewhere) |
| Modulus of elasticity | 200 kN/mm2, about 190-200 GPa |
| Thermal conductivity at 20 C | 30 W/(m.K); 24.9 W/(m.K) at 100 C reported for 416 |
| Specific heat capacity at 20 C | 460 J/(kg.K) |
| Electrical resistivity at 20 C | 0.60 ohm.mm2/m |
| Coefficient of thermal expansion | 10.5e-6 /K (20-100 C); 11.5e-6 /K (20-300 C); 12.0e-6 /K (20-400 C) |
| Magnetic response | Ferromagnetic in all delivery conditions |
| Melting range | about 1482-1532 C |

## Processing

**Forging.** Heat gradually to about 800 C, then faster to 1150-1180 C. Forge between 1180 and 1000 C. Cool slowly in a furnace, in dry ash or an equivalent medium.

**Heat treatment.** Annealing (+A) 745-825 C, slow furnace cool; sub-critical annealing of 416 is 650-760 C, air cool. Hardening 950-1000 C, air or oil quench. Tempering to +QT650 at 680-780 C.

**Machining.** Grade 416 is rated at about 85 % machinability, the highest of the stainless steels. With coated carbide in the annealed condition (Rm 600-685 N/mm2): 6 mm depth of cut at 0.5 mm/rev runs near 160 m/min; 1 mm at 0.2 mm/rev near 300 m/min. Quenched and tempered (Rm 750-950 N/mm2): about 200 and 350 m/min respectively.

**Welding.** Poor welding grade because of the sulphur content, friction welding excepted. If unavoidable, use 1.4833 filler, temper at 650 C afterwards, and keep nitrogen and hydrogen out of the shielding gas. General 416 practice adds 200-300 C preheat and a 650-675 C post-weld anneal or stress relief.

**Corrosion resistance.** The 1.4005 datasheet calls this probably the least corrosion-resistant of the stainless grades. Not suitable for chloride or marine service. Acceptable in ordinary atmosphere, fresh water and dry air, best hardened and polished. Alternatives: 1.4104 (X14CrMoS17) for better corrosion resistance with free-machining behaviour, 1.4006 / 410 for corrosion resistance and formability, 303 as the non-hardenable austenitic option.

## Products manufactured in X12CrS13

- Forged round bars and rods, square, rectangular, flat and hexagonal bars
- Forged hollow bars, sleeves, bushes, bushings, pipes, tubes, barrels, casings, shells, cylinders, hubs, housings
- Forged rings and seamless rolled rings in rectangular, stepped and contoured section
- Forged blocks, discs and plates
- Valve bodies, bonnets, stems, seats and seat rings, pump shafts, motor shafts, gears, bolts, nuts, studs

Standards: EN 10088-3, EN 10250-4, ASTM A473, ASTM A582.

## Plant capability relevant to this grade

| Item | Detail |
|---|---|
| Melting | Electric arc furnace with ladle refining and vacuum oxygen decarburisation, 60 t maximum heat, melted on site |
| Forging | 6,300 t, 4,000 t and 2,000 t hydraulic open-die presses; hammers 750 kg to 5 t |
| Ring rolling | Radial-axial mills at 6 m, 3 m and 1 m; maximum OD 6,000 mm |
| Maximum single piece | 30 tonnes |
| Heat treatment | 14 furnaces, car-bottom and 15 m well type for vertical quenching |
| Delivery condition | As-forged, rough machined, +A or +QT650 |
| Testing | Spectrometry, tensile, Charpy impact, hardness, UT to ASTM A388 and EN 10228-3, MT to ASTM E709, metallography |
| Certification | EN 10204 3.1 standard; 3.2 witnessed by BV, DNV, LR, SGS, TUV or customer inspector on request |
| Class approvals | CCS, BV, DNV, LR, NK |
| Minimum order | 10 kg, no minimum piece count |
| Lead time | 20 to 60 days; no remelting step needed for this grade |

## Typical applications

Valves and valve trim, pump and motor shafts, electric motor parts, gears, bolts, nuts, studs, automatic screw machine parts, washing machine components. Industries: automotive, petrochemical, electronic equipment, general mechanical engineering.

## FAQ

**Is X12CrS13 the same as AISI 416?** Yes. X12CrS13 is the EN steel name, 1.4005 the EN material number, AISI 416 / UNS S41600 the closest American grade.

**Is X12CrS13 magnetic?** Yes, ferromagnetic in all normal delivery conditions.

**Can it be hardened?** Yes. 950-1000 C air or oil quench, then temper. Grade 416 reaches around 40 HRC; nitriding gives a harder surface.

**What service temperature is realistic?** High temperature service is not recommended because of the sulphur content, and sub-zero service is not recommended because ductility falls. Scaling resistance of 416 extends to about 760 C intermittent and 675 C continuous.

**What sizes can you forge?** Rings roll to 6,000 mm OD and the heaviest single forging is 30 t, but the practical limit depends on geometry and section. Send the drawing for confirmation.

**Who supplies it?** Jiangyin Jiangnan Metal Co., Ltd., No.1 Chengxiqiao Road, Zhouzhuang Town, Jiangyin City, Jiangsu Province, China. Telephone +86 189 2135 9659, email sales@steelforgepieces.com.

## Data sources

1. EN 10088-3 composition and mechanical property tables for martensitic stainless long products, British Stainless Steel Association.
2. Swiss Steel Group / Deutsche Edelstahlwerke datasheet 1.4005 X12CrS13.
3. AZoM, Stainless Steel Grade 416 (UNS S41600).
4. SteelNumber, X12CrS13 / 1.4005, EN 10088-3:2005.
5. TJC Steel grade comparison, Y12Cr13 / 416 / SUS 416 / 1.4005.

Reference data for guidance. Certified values for a specific forging appear on the EN 10204 inspection certificate issued with the order.

---

Copyright 1997-2026 Jiangyin Jiangnan Metal Co., Ltd.
