# UNS S32654 Forgings (654 SMO / 1.4652)

**UNS S32654, sold as 654 SMO and designated EN 1.4652, is a conventionally melted super austenitic stainless steel with 24 to 25 percent chromium, 21 to 23 percent nickel, 7 to 8 percent molybdenum and 0.45 to 0.55 percent nitrogen.**

It is the most highly alloyed grade of the SMO super austenitic family. Resistance to pitting, crevice corrosion and chloride stress corrosion cracking comes close to that of nickel-based alloys. The grade is specified where a 6 percent molybdenum steel such as S31254 or 904L has already failed, or is predicted to fail, in hot seawater, concentrated brine or chlorinated acid duty.

Jiangyin Jiangnan Metal Co., Ltd. forges S32654 to drawing at its works in Zhouzhuang Town, Jiangyin City, Jiangsu Province, China. The company melts its own steel, so a certificate traces a part back to a heat number rather than to a purchased billet.

| Field | Detail |
|---|---|
| UNS | S32654 |
| Werkstoff | 1.4652 |
| EN name | X1CrNiMoCuN24-22-8 |
| Trade name | 654 SMO |
| Family | Super austenitic stainless steel, nitrogen alloyed |
| Supplied condition | Solution annealed and water quenched |
| Certification | EN 10204 3.1 standard, 3.2 on request |
| Minimum order | 10 kg, no minimum piece count |
| Lead time | 20 to 60 days |
| Supplier | Jiangyin Jiangnan Metal Co., Ltd. |
| Plant | No.1 Chengxiqiao Road, Zhouzhuang Town, Jiangyin City, Jiangsu Province 214423, China |
| Telephone | +86 189 2135 9659 |
| Email | sales@steelforgepieces.com |
| Page | https://www.steelforgepieces.com/Stainless-Steel/UNS-S32654.html |

## Designations

| System | Designation | Note |
|---|---|---|
| UNS | S32654 | Primary designation in ASTM and ASME work |
| EN / Werkstoff | 1.4652 | Used in EN 10216-5 and EN 10217-7 |
| EN name | X1CrNiMoCuN24-22-8 | Reads the chemistry directly |
| Trade name | 654 SMO | Originating producer designation, Outokumpu |
| Shorthand | 7Mo, Alloy 654 | Common in trading documents |
| JIS, GOST, GB | No direct listing | Supplied against UNS or EN chemistry |

654 SMO is a trademark of its owner and is used here only to identify the grade.

## Chemical composition

Weight percent, balance iron.

| Element | Range | Role |
|---|---|---|
| Carbon | 0.020 max | Held low against carbide precipitation |
| Chromium | 24.0 to 25.0 | Passive film, first term in PREN |
| Nickel | 21.0 to 23.0 | Austenite stability, chloride cracking resistance |
| Molybdenum | 7.0 to 8.0 | Largest contributor to pitting and crevice resistance |
| Nitrogen | 0.45 to 0.55 | Strength and pitting resistance, about twice the level in S31254 |
| Manganese | 2.0 to 4.0 | Raises nitrogen solubility so the nitrogen stays in the melt |
| Copper | 0.30 to 0.60 | Helps in reducing conditions, sulphuric acid in particular |
| Silicon | 0.50 max | Deoxidation |
| Phosphorus | 0.030 max | Residual limit |
| Sulphur | 0.005 max | Hot workability and inclusion cleanliness |

Copper is quoted as 0.30 to 0.60 in most forging and plate specifications. At least one published datasheet lists copper as 0.30 maximum. Confirm the window your specification applies before order.

## Mechanical and physical properties

Minima, solution annealed, room temperature.

| Property | Metric | Imperial |
|---|---|---|
| Tensile strength, min | 750 MPa | 109 ksi |
| Yield strength, 0.2 percent offset, min | 430 MPa | 62 ksi |
| Elongation, min | 40 percent | 40 percent |
| Hardness, annealed | approx. 220 HB max | — |
| Density | 8.0 g/cm3 | 0.289 lb/in3 |

Structure is fully austenitic and non-magnetic as annealed. The grade is not hardenable by heat treatment.

ASTM A312 lists the same strength minima with 35 percent elongation rather than 40. Where a specification is named on the purchase order, that specification governs.

## Corrosion resistance and PREN

PREN is calculated as %Cr + 3.3 x %Mo + 16 x %N. Published values for S32654 do not agree because they are calculated from different points in the composition range. Langley Alloys publishes 54. Datasheets calculating from the top of the range publish 63 to 64. The accurate statement is that S32654 falls between the mid-fifties and the low sixties depending on the heat, and sits well clear of the 6 percent molybdenum grades in every published comparison.

| Grade | UNS | Molybdenum | PREN |
|---|---|---|---|
| 316L | S31603 | approx. 2 percent | 25 |
| 254 SMO | S31254 | approx. 6 percent | 43 |
| 654 SMO | S32654 | 7 to 8 percent | 54 to above 60, source dependent |

## Forged products in S32654

Each item is forged from a single piece of steel. No welding, no casting, no purchased billet.

- **Rolled rings.** Ring-rolled from a punched preform on the radial-axial mill, rectangular or contoured section.
- **Forged rings.** Upset and punched, for sections outside the ring mill envelope.
- **Flanges.** Weld neck, blind, slip-on, orifice, long weld neck and custom bore, to ASME B16.5 and B16.47 dimensions.
- **Round bars and blocks.** Black, peeled or turned. Feedstock for machined valve bodies.
- **Discs and tube sheets.** Solid and bored discs, heat exchanger tube sheets and covers, proof-machined for volumetric inspection.
- **Sleeves and bushings.** Hollow forgings, trepanned or bored from solid.
- **Shafts and spindles.** Stepped shafts, pump shafts, eccentric shafts, pinions, rotors.
- **Valve and wellhead parts.** Bodies, bonnets, stems, seat rings, blocks, spools, nozzles.

## Size envelope

Limits below are plant maximums across all grades. S32654 is hard to work, so the usable envelope in this grade is narrower and each enquiry is reviewed against the drawing.

| Item | Limit | Set by |
|---|---|---|
| Rolled ring outside diameter | up to 6,000 mm | 6 m radial-axial ring mill |
| Minimum ring size | from OD 50 mm | Upset and punch route |
| Single piece weight | up to 30,000 kg | 60 t heat, 6,300 t press |
| Machined diameter | up to 5,000 mm | 5,000 mm vertical turning lathe |
| Shaft turned length | up to 14,000 mm | C61160 lathe, 15 m well furnace |
| Bored cylinders | 1,600 mm dia x 10,000 mm | CNC deep-hole drilling machine |
| Minimum order | 10 kg | No minimum piece count |

## Melting, forging and heat treatment

**Melting.** S32654 runs through the electric arc furnace, is refined in the ladle furnace and decarburised under vacuum. Vacuum oxygen decarburisation is the step that matters for this grade: it pulls carbon to 0.020 percent maximum while nitrogen is held at 0.45 to 0.55 percent. Electroslag remelting under protective atmosphere is added where the order requires it. Maximum heat size is 60 tonnes.

**Forging.** The alloy holds its strength at temperature and has a short hot working window, so passes are planned to avoid finishing cold. Sigma and other intermetallic phases form around 700 to 900 degrees Celsius and time in that range is minimised. Presses are 6,300 t, 4,000 t and 2,000 t, with ring mills at 6 m, 3 m and 1 m.

**Heat treatment.** Solution anneal near 1150 to 1200 degrees Celsius with rapid water quench, which returns intermetallics to solution and restores corrosion resistance. No precipitation hardening treatment applies. Fourteen furnaces on site, including car-bottom furnaces to 8,000 x 2,000 x 2,000 mm and 15 m deep well furnaces for vertical quenching.

**Welding note.** Where forgings are welded into an assembly, nickel-based filler of the ERNiCrMo type is normally used so the weld metal does not become the weakest point in the corrosion chain.

## Applications

| Sector | Application | Reason |
|---|---|---|
| Desalination | Brine heater internals, high pressure brine piping, MSF and MED plant, reverse osmosis high pressure sections | Brine concentration and temperature beyond 254 SMO and 904L |
| Offshore oil and gas | Seawater and firewater systems, produced water handling, risers, manifolds, subsea connectors | Chloride, temperature and pressure together; strength reduces dependence on cathodic protection |
| Chlor-alkali and chemical | Chlorine and chlorine dioxide duty, sulphuric and mixed acid equipment carrying chlorides | Oxidising and high chloride conditions at the same time |
| Pulp and paper | Black liquor evaporator bodies and internals in kraft mills | Alkaline chloride cracking resistance at temperature |
| Power | Flue gas desulphurisation absorbers and ducting | Acidic chloride condensate |
| Water treatment | Demineralised water plant, waste water, high salinity process equipment | Design life in chloride bearing water |

## Standards

| Form | ASTM / ASME | European |
|---|---|---|
| Plate, sheet, strip | A240 / SA240 | EN 10088 |
| Seamless pipe | A312 | EN 10216-5 |
| Heat exchanger tube | A213 | EN 10216-5 |
| General tubing | A269 | — |
| Welded tube | A249 | EN 10217-7 |

Forgings and rolled rings are supplied to the grade chemistry and property requirements with A182 style supplementary requirements applied by agreement. Name the forging specification your project calls for and we will confirm in writing whether we can certify to it before order.

## Inspection and documents

| Check | Standard or scope |
|---|---|
| Ultrasonic testing | EN 10228-3, SEP 1921, ASTM A388 |
| Chemical analysis | Optical emission spectrometry on every heat; handheld PMI on request |
| Mechanical testing | Tensile, yield, elongation, hardness; Charpy impact on request |
| Corrosion testing | ASTM G48 pitting and critical pitting temperature, placed with an accredited laboratory |
| Certification | EN 10204 3.1 standard, 3.2 witnessed by BV, DNV, LR, SGS or TUV on request |
| Works approvals | CCS, BV, DNV, LR, NK |
| Dimensional | Full report against customer drawing |

## Questions

**Is S32654 a powder metallurgy steel?**
No. It is a conventionally melted wrought stainless steel. The powder metallurgy claim appears on a number of supplier pages and is incorrect. Forging stock here is produced by electric arc melting with ladle refining and vacuum oxygen decarburisation, with electroslag remelting where specified.

**How does it differ from 254 SMO?**
S32654 carries 7 to 8 percent molybdenum against roughly 6 in S31254, more chromium, and about twice the nitrogen. That buys a higher PREN and a considerably higher yield strength. The usual trigger for switching is a 6 percent molybdenum grade that has pitted in service, or a duty where the design seawater temperature rules one out on paper.

**Can it replace a nickel alloy or titanium?**
In much chloride service its localised corrosion resistance is in the same band as the better nickel alloys, and it is regularly evaluated as a cheaper substitute in seawater and brine systems. Whether the swap holds depends on temperature, chloride level, pH and the presence of reducing acids or hydrogen sulphide. Case by case, not a general rule.

**Do you hold S32654 in stock?**
Not as finished forgings. The grade is made to order against the drawing. Lead time is 20 to 60 days depending on size, heat treatment and testing scope.

**What do you need to quote?**
Finished or forged size, or a drawing. Quantity. The specification the project names. Any testing beyond standard scope, and whether 3.1 or 3.2 certification is required. Quotations normally return within one working day.

## Related grades

- [A182 F44 / S31254](https://www.steelforgepieces.com/Stainless-Steel/A182-F44.html) — the 6 percent molybdenum grade one step below
- [904L](https://www.steelforgepieces.com/Stainless-Steel/904L.html) — high nickel austenitic for sulphuric acid
- [A182 F55 / S32760](https://www.steelforgepieces.com/Stainless-Steel/A182-F55.html) — super duplex, common alternative in seawater systems
- [A182 F53 / S32750](https://www.steelforgepieces.com/Stainless-Steel/A182-F53.html) — super duplex, high strength
- [Sanicro 28](https://www.steelforgepieces.com/Stainless-Steel/Sanicro-28.html) — high alloy austenitic for acid service
- [Hastelloy C-276](https://www.steelforgepieces.com/Nickel-Alloy/Hastelloy-C-276.html) — nickel base, for media beyond stainless

## Contact

Jiangyin Jiangnan Metal Co., Ltd.
No.1 Chengxiqiao Road, Zhouzhuang Town, Jiangyin City, Jiangsu Province 214423, China
Telephone, WhatsApp and WeChat: +86 189 2135 9659
Email: sales@steelforgepieces.com
Website: https://www.steelforgepieces.com/

Grade data compiled from published UNS S32654, 654 SMO and EN 1.4652 datasheets. Values are typical minima for the solution annealed condition, not a guarantee against any particular order. Binding figures are those on the material test certificate. Reviewed 9 October 2026.
