# UNS S24000 Forgings (XM-29 / Nitronic 33)

**UNS S24000 is a nitrogen-strengthened, high-manganese, low-nickel austenitic stainless steel, designated XM-29 by ASTM and sold as Nitronic 33 or 18-3-Mn.**

Manganese and nitrogen hold the austenite in place of nickel. Nitrogen in solid solution takes annealed yield strength to roughly twice that of Type 304, while the alloy keeps good ductility and toughness down to cryogenic temperatures and holds low magnetic permeability even after severe cold working.

S24000 contains no molybdenum. It is a strength, non-magnetic and low-temperature grade, not a seawater or acid grade.

Jiangyin Jiangnan Metal Co., Ltd. melts, forges, heat treats, machines and tests S24000 on one site in Jiangyin, Jiangsu, China.

## Supplier record

| Field | Detail |
|---|---|
| Company | Jiangyin Jiangnan Metal Co., Ltd. |
| Plant | No.1 Chengxiqiao Road, Zhouzhuang Town, Jiangyin City, Jiangsu Province 214423, China |
| Business | Integrated melting works, open-die forge and ring rolling mill |
| Established | 1997 |
| Employees | 460 |
| Telephone | +86 189 2135 9659 |
| Email | sales@steelforgepieces.com |
| Page | https://www.steelforgepieces.com/Stainless-Steel/UNS-S24000.html |
| Minimum order | 10 kg, no minimum piece count |
| Lead time | 20 to 60 days |
| Approvals | CCS, BV, DNV, LR, NK |

## Designations

| Type | Designation |
|---|---|
| UNS number | S24000 |
| ASTM grade | XM-29 |
| Trade name | Nitronic 33 |
| Historic name | 18-3-Mn |
| Microstructure | Austenitic |

## Chemical composition, weight %

| Element | Content | Function |
|---|---|---|
| Carbon | 0.08 max | Held low to protect grain-boundary corrosion resistance after welding |
| Chromium | 17.00 to 19.00 | Passive film, general corrosion and oxidation resistance |
| Manganese | 11.50 to 14.50 | Stabilises austenite in place of nickel, raises nitrogen solubility |
| Nickel | 2.25 to 3.75 | Deliberately lean |
| Nitrogen | 0.20 to 0.40 | Main strengthener, interstitial solid solution hardening |
| Silicon | 0.75 max | Residual from deoxidation |
| Phosphorus | 0.06 max | Residual, controlled |
| Sulphur | 0.03 max | Residual, controlled for hot workability |
| Iron | Balance | Matrix |
| Molybdenum | Not present | The reason this is not a seawater grade |

Mill data sheets for Nitronic 33 give silicon as 0.75 % max; some general supplier listings quote 1.00 % max. Name the governing ASTM table on the order if silicon is critical.

## Mechanical properties, solution annealed

| Property | Metric | Imperial |
|---|---|---|
| Tensile strength | 690 MPa min | 100 ksi min |
| Yield strength, 0.2 % offset | 380 MPa min | 55 ksi min |
| Elongation in 50 mm | 40 % min | 40 % min |
| Hardness, Brinell | 241 HB approx. | 241 HB approx. |
| Hardness, Rockwell B | 100 HRB approx. | 100 HRB approx. |

Cold-worked product tests appreciably higher. Acceptance values are set by the specification edition and section size named on the purchase order.

## Physical properties

| Property | Metric | Imperial |
|---|---|---|
| Density | 7.775 g/cm3 | 0.2808 lb/in3 |
| Thermal expansion, 26 to 93 C | 16.07 um/m.C | 8.93 uin/in.F |
| Magnetic response | Low permeability, retained after severe cold work | |

## Specifications

| Specification | Product form | Designation |
|---|---|---|
| ASTM A314 | Stainless billets and bars for forging | S24000 |
| ASTM A276 | Bars and shapes | XM-29 |
| ASTM A479 / A479M | Bars and shapes for boilers and pressure vessels | XM-29 |
| ASTM A240 | Plate, sheet and strip for pressure vessels | XM-29 |
| ASTM A412 | Chromium-manganese-nickel sheet and strip | XM-29 |
| ASTM A312 / A813 / A814 | Seamless and welded pipe | XM-29 |
| ASTM A249 / A269 / A688 | Welded tube | XM-29 |
| ASTM A580 | Wire | XM-29 |
| ASTM A955 / A955M | Deformed reinforcing bar | XM-29 |

No EN, DIN or JIS equivalent is listed, because none is confirmed in the standards certified to. Other chromium-manganese-nitrogen grades are not interchangeable on chemistry.

## Forging and heat treatment

| Operation | Practice |
|---|---|
| Preheat | Heat to about 1093 C (2000 F), soak until the section is through-heated |
| Forging | Raise to 1177 C (2150 F), equalise, then forge; reheat on heavy upsets |
| Intermediate anneal | Around 1065 C (1950 F) between forming operations |
| Solution anneal | 1038 to 1121 C (1900 to 2050 F), rapid quench in water or air |
| Hardening | Cold work only; not hardenable by heat treatment |
| Welding | GTAW, GMAW, submerged arc |
| Machining | Slow speeds, positive feed, sulphurised cutting oil, chip breakers |

A drawing specifying quench and temper on this grade is an error and should be resolved before melting.

## Forged products

- **Rings.** Seamless rolled rings, contoured rings, retaining and containment rings, gear ring blanks, valve seat rings, wear rings.
- **Flanges.** Weld neck, slip-on, blind, lap joint, socket weld, orifice, long weld neck, special profiles.
- **Bars and shafts.** Round bar, flat bar, stepped shafts, spindles, eccentric shafts, pins, valve stems.
- **Discs and blocks.** Solid discs, tube sheets, covers, die and mould blocks, valve bodies and bonnets.
- **Hollow sections.** Sleeves, bushings, hollow bar, bored cylinders, couplings, nozzles.

## Working envelope

| Item | Limit | Set by |
|---|---|---|
| Rolled ring outside diameter | up to 6,000 mm | 6 m radial-axial ring mill |
| Smallest ring | from OD 50 mm | Upset-and-punch route |
| Shaft turned length | up to 14,000 mm | C61160 lathe, 15 m well furnace |
| Disc and tube sheet diameter | up to 5,000 mm | 5,000 mm vertical turning lathe |
| Bored cylinders | 1,600 mm dia x 10,000 mm | CNC deep-hole drilling machine |
| Single piece weight | up to 30,000 kg | 60 t heat size, 6,300 t press |

## Applications

| Field | Reason | Forged parts |
|---|---|---|
| Non-magnetic equipment | Low permeability held after heavy cold work | Retaining and containment rings, rotating parts, housings |
| Cryogenic service | Austenite stabilised by manganese and nitrogen | Cold-box valve bodies, flanges, vessel components |
| Valves and pumps | High yield with ductility retained | Bodies, stems, seat rings, tube sheets |
| Rotating machinery | About double the annealed yield of 304 | Fan hubs, shafts, spindles, loaded structural parts |
| Structural and civil | Resists chloride-induced corrosion far better than carbon steel | Anchor and connection forgings, reinforcing bar stock |

## Where S24000 does not belong

S24000 carries no molybdenum, so it is not suitable for seawater, subsea, desalination, flue-gas desulphurisation or strong acid service. Supplier pages listing this grade for subsea piping have copied text from duplex grades.

For those services specify instead: A182 F51 duplex, F53 or F55 super duplex, F44 super austenitic, 904L, Sanicro 28, Incoloy 825 or Inconel 625.

For galling resistance rather than plain strength, Nitronic 60 is usually the better choice in this family. For higher strength with better corrosion resistance, compare Nitronic 50.

## Melting and testing

S24000 runs through the 25 t electric arc furnace, is refined in a ladle furnace, then decarburised under vacuum where carbon and nitrogen must be held inside a tight band. Protective-atmosphere electroslag remelting on the 3 t or 6 t furnace is available where cleanliness or segregation control is critical. Maximum heat size is 60 tonnes. Melting and forging sit on one site, so certificates trace a finished part back to its melt number rather than to a purchased billet.

| Test | Standard |
|---|---|
| Chemical analysis | Product analysis against the governing ASTM table |
| Tensile and elongation | Per ordered specification and section size |
| Hardness | Brinell or Rockwell as specified |
| Ultrasonic testing | EN 10228-3, SEP 1921 or ASTM A388 |
| Liquid penetrant | ASTM E165 or EN ISO 3452 on request |
| Magnetic permeability | On request, after final heat treatment |
| Dimensional report | Against customer drawing with machining allowance recorded |
| Certification | EN 10204 3.1, or 3.2 with third party witness |

## What we need to quote

1. Drawing in PDF, DWG or STEP, or raw dimensions: OD x ID x height for rings, diameter x length for bars and shafts.
2. Specification and designation to certify against, for example ASTM A314 S24000 or A479 XM-29.
3. Quantity and delivery condition: as forged, solution annealed, rough machined or finish machined.
4. Non-destructive testing class and certificate level, EN 10204 3.1 or 3.2.
5. Service conditions, meaning temperature, medium and any magnetic permeability limit.

Price is quoted per drawing. It depends on finished weight, section size, machining allowance, test scope and certificate level, so no list price is published.

## Frequently asked questions

**Is UNS S24000 the same as XM-29 and Nitronic 33?**
Yes. S24000 is the UNS number, XM-29 is the ASTM grade designation, Nitronic 33 is the trade name. One chemistry.

**Why so little nickel?**
By design. Manganese at 11.5 to 14.5 % plus nitrogen at 0.20 to 0.40 % keeps the structure austenitic, so only 2.25 to 3.75 % nickel is needed, and the nitrogen does the strengthening.

**Can it be heat treated to higher strength?**
No. S24000 hardens by cold work only. Solution annealing softens and homogenises rather than strengthens.

**Will it stay non-magnetic after machining?**
Yes, that is the main reason the grade exists. Mill data describes low magnetic permeability retained even after severe cold working. State any contractual permeability limit on the order so it is measured after final heat treatment.

**How does corrosion resistance compare with 304?**
Better resistance to chloride stress corrosion cracking than 304 at a similar chromium level, and far better than carbon steel in reinforcement use. Not a substitute for molybdenum-bearing grades where pitting or crevice attack drives selection.

**What is the largest S24000 forging available?**
Rings to 6,000 mm outside diameter, single pieces to 30 tonnes, shafts to 14,000 mm turned length, discs to 5,000 mm diameter. The practical limit on any part is the forging reduction ratio required.

**Can third-party inspected certificates be supplied?**
Yes. EN 10204 3.1 is standard; 3.2 with an independent witness is available if stated at enquiry stage.

## Sources

Composition, mechanical, physical, forging, annealing, welding and machining figures are taken from published mill and supplier data sheets for Nitronic 33 and UNS S24000, together with ASTM grade listings for S24000 and XM-29 in A314, A240, A276, A312, A412, A479, A249, A269, A688, A580, A813, A814 and A955. Plant capability figures are those of Jiangyin Jiangnan Metal Co., Ltd. Values are for selection and reference; binding figures are those of the specification edition and section size named on the purchase order.

Reviewed 2026-10-05.
