---
title: "1.4401 Forgings (X5CrNiMo17-12-2 / AISI 316)"
canonical: https://www.steelforgepieces.com/Stainless-Steel/1.4401.html
supplier: Jiangyin Jiangnan Metal Co., Ltd.
location: "No.1 Chengxiqiao Road, Zhouzhuang Town, Jiangyin City, Jiangsu Province, China"
telephone: "+86 189 2135 9659"
email: sales@steelforgepieces.com
reviewed: 2026-09-22
sources: "EN 10088-3, EN 10250-4, EN 10222-5, ASTM A182/A182M, ISO 15156-3"
---

# 1.4401 Forgings: X5CrNiMo17-12-2 / UNS S31600 / AISI 316

**Jiangyin Jiangnan Metal Co., Ltd. melts, open-die forges, heat-treats, machines and certifies 1.4401 (X5CrNiMo17-12-2, UNS S31600, AISI 316) forgings at its own works in Jiangyin City, Jiangsu Province, China, and has done so since 1997.** 1.4401 is a chromium–nickel–molybdenum austenitic stainless steel. The 2.00–2.50 % molybdenum is what separates it from 1.4301 / 304 and what gives it resistance to pitting in chloride-bearing and mildly acidic media. The steel is melted on site in an electric arc furnace, refined in a ladle furnace and decarburised under vacuum in units of 30 t and 60 t, so the mill certificate traces a 1.4401 forging back to its own melt number rather than to a purchased billet.

Key capability figures: rolled rings to OD 6,000 mm · single pieces to 30 t · minimum order 10 kg · lead time 20–60 days · EN 10204 3.1 / 3.2 certification · CCS, BV, DNV, LR and NK class approvals.

## 1. Designations and equivalents

| Item | Value |
|---|---|
| EN material number | 1.4401 |
| EN steel name | X5CrNiMo17-12-2 |
| UNS | S31600 |
| AISI / ASTM type | 316 |
| ASTM forging grade | ASTM A182 F316; also A473 and A965 |
| JIS | SUS 316 |
| GB/T (China) | 06Cr17Ni12Mo2 (formerly 0Cr17Ni12Mo2) |
| BS | 316S31 |
| AFNOR | Z6CND17-11 |
| SS (Sweden) | 2347 |
| Structure | Austenitic, non-magnetic in the solution annealed condition |
| Delivery condition | Solution annealed 1,020–1,120 °C, rapidly cooled. ASTM A182 F316 requires a minimum of 1,040 °C with a liquid quench |
| Forging standards | EN 10250-4, EN 10222-5, ASTM A182/A182M |

## 2. Chemical composition (% by mass)

| Element | 1.4401 (EN 10088-3) | ASTM A182 F316 (UNS S31600) |
|---|---|---|
| C | ≤ 0.07 | ≤ 0.08 |
| Si | ≤ 1.00 | ≤ 1.00 |
| Mn | ≤ 2.00 | ≤ 2.00 |
| P | ≤ 0.045 | ≤ 0.045 |
| S | ≤ 0.030 | ≤ 0.030 |
| N | ≤ 0.11 | ≤ 0.10 |
| Cr | 16.5 – 18.5 | 16.0 – 18.0 |
| Mo | 2.00 – 2.50 | 2.00 – 3.00 |
| Ni | 10.0 – 13.0 | 10.0 – 14.0 |
| Fe | Balance | Balance |

Because the steel is melted on site, a tighter chemistry window than the table above, including dual certification to 1.4401 and 1.4404 with carbon below 0.030 %, is a decision made at the furnace rather than a search for suitable stock.

## 3. Mechanical properties, solution annealed

| Property | EN 10088-3 / EN 10250-4 | ASTM A182 F316 |
|---|---|---|
| Proof strength Rp0.2 | ≥ 200 MPa (29 ksi) | ≥ 205 MPa (30 ksi) |
| Proof strength Rp1.0 | ≥ 235 MPa (34 ksi) | not specified |
| Tensile strength Rm | 500–700 MPa (73–102 ksi) | ≥ 515 MPa (75 ksi) |
| Elongation A | ≥ 40 % longitudinal (A5, gauge length 5d) | ≥ 30 % (gauge length 2 in. / 50 mm) |
| Reduction of area | typically ≥ 55 % | ≥ 50 % |
| Impact KV at +20 °C | ≥ 100 J | by agreement |
| Hardness | ≤ 215 HB | not specified by A182 (the A240 plate limit of 217 HBW is often quoted) |
| Typical as-delivered hardness | 150–190 HB | — |

1.4401 cannot be hardened by heat treatment. It is strengthened only by cold work, which also makes it slightly magnetic.

## 4. Physical properties at 20 °C

| Property | Metric | Imperial |
|---|---|---|
| Density | 8.0 g/cm³ | 0.289 lb/in³ |
| Modulus of elasticity | 200 GPa | 29,000 ksi |
| Thermal conductivity | 15 W/(m·K) | 8.7 Btu/(h·ft·°F) |
| Specific heat capacity | 500 J/(kg·K) | 0.12 Btu/(lb·°F) |
| Electrical resistivity | 0.75 Ω·mm²/m | 29.5 µΩ·in |
| Thermal expansion 20–100 °C | 16.0 × 10⁻⁶ K⁻¹ | 8.9 × 10⁻⁶ /°F |
| Thermal expansion 20–200 °C | 16.5 × 10⁻⁶ K⁻¹ | 9.2 × 10⁻⁶ /°F |
| Magnetic permeability, annealed | < 1.02 (dimensionless) | — |
| Scaling resistance in air | 870 °C intermittent, 925 °C continuous | — |

## 5. Corrosion behaviour

PREN (Cr + 3.3 Mo + 16 N) = 23.1 to 28.5.

- Good service: chemical and petrochemical process streams, pulp and paper digesters and liquor systems, food and beverage plant, pharmaceutical and biochemical equipment, heat exchangers, marine atmospheres.
- Limit: chloride stress-corrosion cracking becomes a real risk above roughly 60 °C in chloride-bearing water.
- Not suitable: seawater immersion, brine, hot chloride process streams, high-chloride produced water. Use 1.4462 / SAF 2205, 1.4410 / SAF 2507, 904L or 254 SMO instead, all of which are forged on the same equipment at this works.
- Welded assemblies: specify 1.4404 / 316L where the forging will be welded and cannot be re-solution-annealed, because 1.4401's 0.07 % carbon limit allows sensitisation between 450 and 850 °C.
- Sour service: UNS S31600 is listed in ISO 15156-3 / NACE MR0175 in the solution annealed condition with hardness capped at 22 HRC, within the environmental limits of that standard.

## 6. 1.4401 compared with neighbouring grades

| Grade | EN name | C max % | Mo % | PREN | Choose it when |
|---|---|---|---|---|---|
| 1.4401 / 316 | X5CrNiMo17-12-2 | 0.07 | 2.0–2.5 | 23.1–28.5 | General Mo-bearing austenitic forging, not welded after delivery |
| 1.4404 / 316L | X2CrNiMo17-12-2 | 0.030 | 2.0–2.5 | 23.1–28.5 | The forging will be welded into an assembly. EN 10088-3 gives both grades the same mechanical minimums; F316 outranks F316L only in ASTM terms (205/515 MPa vs 170/485 MPa) |
| 1.4436 | X3CrNiMo17-13-3 | 0.05 | 2.5–3.0 | 24.8–30.2 | More pitting resistance needed, duplex not warranted |
| 1.4571 / 316Ti | X6CrNiMoTi17-12-2 | 0.08 | 2.0–2.5 | 23.1–26.8 (no specified N) | Sustained service between 450 and 850 °C |
| 1.4462 / 2205 | X2CrNiMoN22-5-3 | 0.030 | 2.5–3.5 | 30.9–38.1 | Seawater, brine or hot chlorides; or double the proof strength |

PREN in this table is calculated as Cr + 3.3 Mo + 16 N from the composition limits of each grade. 1.4571 has no specified nitrogen, so its upper bound is set by chromium and molybdenum alone.

## 7. Production route at the Jiangyin works

1. **Melt and refine.** Electric arc furnace, ladle furnace, vacuum oxygen decarburisation (30 t and 60 t units); maximum heat size 60 t. Protective-atmosphere electroslag remelting available where exceptional cleanness is specified.
2. **Forge or ring roll.** Forging from about 1,150–1,250 °C, finished above roughly 925 °C. Presses of 6,300 t, 4,000 t and 2,000 t; radial-axial ring mills of 6 m, 3 m and 1 m; hammers from 750 kg to 5 t.
3. **Solution anneal.** Solution annealing at 1,020–1,120 °C (1,040 °C minimum where ASTM A182 F316 applies), rapid cooling, water quench on heavy sections. 14 furnaces including chambers to 8,000 × 2,000 × 2,000 mm and two 15 m well-type furnaces for vertical quenching of long shafts.
4. **Machine and inspect.** Vertical lathes to Ø5,000 mm swing, horizontal lathes to 14,000 mm, CNC deep-hole drilling to Ø1,600 × 10,000 mm. Supplied as-forged, proof-machined or finish-machined.

## 8. Product forms and size envelope in 1.4401

| Product form | Size envelope |
|---|---|
| Seamless rolled rings | OD 50 mm to OD 6,000 mm |
| Forged rings, gear ring blanks | Sections outside the ring-mill envelope |
| Forged flanges | ASME B16.5, B16.47, API 6A types |
| Forged shafts and spindles | Up to 14,000 mm turned length |
| Discs, tube sheets, covers | Up to Ø5,000 mm machined |
| Cylinders, sleeves, bushings | Bored to Ø1,600 × 10,000 mm |
| Bars, blocks, valve parts | Press and hammer capacity |
| Single-piece weight | Up to 30,000 kg |

## 9. Testing, NDE and certification

- Ultrasonic testing of 1.4401 is carried out to **EN 10228-4**, the part written for austenitic and austenitic-ferritic steels, not EN 10228-3. Where the order calls for them, ASTM A388 or SEP 1921 apply instead.
- Surface examination is by **liquid penetrant** (ASTM E165 / ISO 3452-1). Magnetic particle inspection does not work on 1.4401, which is non-magnetic as annealed.
- Chemistry by optical emission spectrometry (ASTM E415) and infrared carbon and sulphur analysis (ASTM E1019); PMI on the finished forging.
- Tensile to ASTM A370 / ISO 6892-1 on 600 kN and 300 kN machines; Charpy V-notch impact to −60 °C.
- Intergranular corrosion (ASTM A262 Practice E, ASTM G28) and pitting (ASTM G48) placed with accredited third-party laboratories.
- Certification: EN 10204 3.1 as standard, EN 10204 3.2 witnessed by BV, DNV, LR, SGS, TÜV or the customer's own inspector.

## 10. Applications

Chemical and petrochemical (pressure-vessel flanges, heat-exchanger tube sheets, nozzles, pump and valve bodies) · pulp and paper (digester components, paper-machine rolls and shafts) · food, beverage and pharmaceutical (process equipment, sanitary shafts and sleeves) · oil and gas within the ISO 15156 limits (valve bodies, bonnets, stems, seat rings, spools, manifolds) · power (turbine and compressor parts, gear blanks, casing flanges) · marine and offshore, non-immersed (couplings, mooring hardware, bushings) · heavy machinery (rolls, crane wheels, eccentric shafts, gear rings, slewing rings).

## 11. How to order

Quotations are prepared from a drawing or a written specification and are normally returned within two working days. Minimum order 10 kg with no minimum piece count; lead time 20–60 days.

Include in the enquiry: grade and specification (e.g. 1.4401 to EN 10250-4, dual certified to ASTM A182 F316); dimensions or drawing (PDF, DWG, DXF, STEP); quantity and repeat volume; delivery condition; testing requirements (e.g. UT to EN 10228-4 class 3, PT to ASTM E165, ASTM A262 Practice E); certification level and destination port.

## Contact

Jiangyin Jiangnan Metal Co., Ltd., open-die forging factory and integrated melting works
No.1 Chengxiqiao Road, Zhouzhuang Town, Jiangyin City, Jiangsu Province, China
Telephone / WhatsApp / WeChat: +86 189 2135 9659
Email: sales@steelforgepieces.com
Business hours: Monday–Saturday, 08:00–17:30 China Standard Time (UTC+8)
Established 1997 · 460 employees · CCS, BV, DNV, LR, NK approvals · exports to North America, Europe, the Middle East and Asia-Pacific

Wuxi Shuofang International Airport is 30 km from the plant; Shanghai's airports are 160 km. Nearest export ports: Zhangjiagang and Shanghai. Customer audits and third-party witness testing are welcome by prior arrangement.

---

Datasheet 1.4401 / X5CrNiMo17-12-2, revision of 22 September 2026, issued by the metallurgy department of Jiangyin Jiangnan Metal Co., Ltd.
Source: https://www.steelforgepieces.com/Stainless-Steel/1.4401.html
