# X2CrNiMnMoNNb21-16-5-3 / 1.3964 forgings, seamless rolled rings and bars

EN 1.3964, also sold as Magnadur 3964 and BOEHLER P501. Non-magnetizable
austenitic stainless steel. Open-die forgings to WL 1.3964-3 and seamless rolled
rings to WL 1.3964-6, forged and certified by Jiangyin Jiangnan Metal Co., Ltd.,
Jiangyin, Jiangsu, China.

## Grade record

| Item | Value |
| --- | --- |
| EN designation | X2CrNiMnMoNNb21-16-5-3 |
| Material number | 1.3964 |
| Type | Austenitic, niobium stabilised, nitrogen bearing, non-magnetizable |
| Standards | SEW 390, WL 1.3964-1, -2, -3, -6 |
| Naval record | BWB WL 1.3964-6, grade 1.3964.9 |
| Delivery condition | Solution annealed and rapidly cooled |
| Certification | EN 10204 3.1, or 3.2 countersigned by a third party |
| Supplied by | Jiangyin Jiangnan Metal Co., Ltd., No.1 Chengxiqiao Road, Zhouzhuang Town, Jiangyin City, Jiangsu Province, China. sales@steelforgepieces.com, +86 189 2135 9659 |

## Summary

1.3964 contains about 21 per cent chromium, 16 per cent nickel, 5 per cent
manganese and 3 per cent molybdenum with 0.20 to 0.35 per cent nitrogen. The
alloy content holds the austenite stable, so the steel stays non-magnetizable at
a relative permeability near 1.04, while nitrogen lifts the proof strength above
a conventional chromium nickel molybdenum grade. Solution annealing is 1020 to
1050 C with rapid cooling. Forging is 900 to 1100 C. The documented application
is non-magnetizable seawater proof rolled rings for German Navy vessels, along
with non-magnetic machine parts, cryogenic equipment and instrumentation.

## 01 What the grade is

The designation reads as the analysis: X for high alloy, 2 for the carbon level,
then chromium 21, nickel 16, manganese 5 and molybdenum 3 per cent, with nitrogen
and niobium as deliberate additions. Niobium stabilisation plus the 0.03 per cent
carbon ceiling stops chromium carbides forming at grain boundaries during
welding, so resistance to intercrystalline corrosion to DIN EN ISO 3651-2 is kept
in the sensitised condition.

Magnetic neutrality under load is the reason the grade is specified. Many
austenitic stainless steels transform partly to martensite when cold worked and
turn weakly magnetic. The nickel, manganese and nitrogen content of 1.3964
suppresses that transformation. Deutsche Edelstahlwerke quotes a relative
permeability of 1.04. voestalpine quotes below 1.01 for its own product.

## 02 Chemical composition

Per cent by weight.

| Element | C | Si | Mn | P | S | Cr | Ni | Mo | Nb | N |
| --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Specified | max 0.03 | max 1.00 | 4.00-6.00 | max 0.025 | max 0.010 | 20.00-21.50 | 15.00-17.00 | 3.00-3.50 | max 0.25 | 0.20-0.35 |

Balance iron. Sulphur is held to 0.010 per cent to protect hot ductility during
forging and to remove sulphide initiation sites in service.

## 03 Difference from UNS S20910

1.3964 is routinely cross-referenced to Alloy 50, UNS S20910 and XM-19. For a
purchase order they are not interchangeable. voestalpine states that 1.3964 is
the European variant under DIN EN chemical limits while Alloy 50 is the American
grade under ASTM and AISI.

| Element | 1.3964, SEW 390 | S20910 / XM-19, ASTM A479 |
| --- | --- | --- |
| Carbon | max 0.03 | max 0.06 |
| Nickel | 15.0-17.0 | 11.5-13.5 |
| Molybdenum | 3.0-3.5 | 1.5-3.0 |
| Chromium | 20.0-21.5 | 20.0-23.5 |
| Vanadium | not specified | 0.10-0.30 |

Where the drawing calls out 1.3964 or a WL sub-standard, an S20910 certificate is
not a drop-in substitute without written engineering approval.

## 04 Mechanical properties

Specified room temperature values, solution annealed.

| Property | Symbol | Longitudinal | Transverse and tangential |
| --- | --- | --- | --- |
| Yield strength | Rp0.2 | min 365 MPa | min 365 MPa |
| Tensile strength | Rm | 700-950 MPa | 700-950 MPa |
| Elongation | A | min 35 % | min 30 % |
| Impact energy | Av | min 85 J | min 55 J |

Above 160 mm section thickness the values are a matter of agreement, because
section size governs the quench rate through the wall.

## 05 Physical properties

| Property | Value |
| --- | --- |
| Density | 7.90 kg/dm3 |
| Electrical resistivity at 20 C | 0.70 ohm mm2/m |
| Thermal conductivity at 20 C | 14 W/m.K |
| Specific heat capacity at 20 C | 460 J/kg.K |
| Relative magnetic permeability | approx 1.04 |
| Thermal expansion 20-100 C | 15.7 x 10-6 /K |
| Thermal expansion 20-200 C | 17.0 x 10-6 /K |
| Thermal expansion 20-300 C | 17.5 x 10-6 /K |
| Thermal expansion 20-400 C | 17.8 x 10-6 /K |

## 06 Corrosion behaviour

The pitting index falls between 33.1 and 38.6, above a standard 316L. The grade
performs in rural, industrial and coastal atmospheres, in cold nitric and organic
acids and in chloride bearing media. Resistance to intercrystalline corrosion is
qualified to DIN EN ISO 3651-2, or ASTM A262 Practice E where the specification
is written to American standards.

Limitation: the manganese addition works against pitting resistance compared with
a low manganese steel of similar alloying. For hot stagnant chloride duty a
super-duplex or 6Mo grade is the better choice. As non-magnetizable substitutes,
1.3952 and 1.3974 are the alternatives named by the mill.

## 07 Forging, heat treatment and machining

Hot working: preheat 950 to 1150 C, forge 900 to 1100 C, cool rapidly in air or
water after the last blow.

Solution annealing: 1020 to 1050 C, rapid cooling in air or water. Figures near
1066 to 1121 C circulating for this grade originate in Nitronic 50 literature and
do not apply to 1.3964.

Welding: no post-weld heat treatment in most cases. Fillers 1.3954 and 1.3984.
Post-weld solution annealing only after heavy cold deformation or on thick walls.

Machining: the steel work hardens quickly. Guideline turning values for solution
annealed material at Rm 560 to 640 MPa with coated carbide tooling.

| Depth of cut | Feed rate | Cutting speed |
| --- | --- | --- |
| 6 mm | 0.5 mm/rev | 110 m/min |
| 3 mm | 0.4 mm/rev | 125 m/min |
| 1 mm | 0.2 mm/rev | 150 m/min |

Inspection: ultrasonic examination to EN 10228-3, SEP 1921 or ASTM A388, with
EN 10204 3.1 or third party 3.2 certification. Permeability measurement on the
finished part is available on request.

## 08 Product forms and plant limits

WL 1.3964-6 was reissued in August 2025, replacing the October 2008 edition.
Confirm which edition the specification calls up.

| Sub-standard | Product form | Supply position |
| --- | --- | --- |
| WL 1.3964-1 | Plate and sheet | On request, partner mill |
| WL 1.3964-2 | Round, flat and square bars | Forged and rolled bar |
| WL 1.3964-3 | Open-die forged parts | Made in house |
| WL 1.3964-6 | Seamless rolled rings | Made in house |

Forms supplied: seamless rolled rings, forged rings, flanges and blinds, discs
and tube sheets, shafts and spindles, sleeves, bushings, forged tube, valve
bodies, seat rings and stems, custom open-die forgings to drawing.

| Dimension | Limit | Set by |
| --- | --- | --- |
| Rolled ring outside diameter | up to 6,000 mm | 6 m radial-axial ring mill |
| Machined disc diameter | up to 5,000 mm | 5,000 mm vertical turning lathe |
| Shaft turned length | up to 14,000 mm | C61160 lathe, 15 m well furnace |
| Bored cylinders | 1,600 mm dia x 10,000 mm | CNC deep-hole drilling machine |
| Single piece weight | up to 30,000 kg | 60 t maximum heat, 6,300 t press |
| Minimum order | 10 kg, no minimum piece count | Works policy |
| Lead time | 20 to 60 days | Route and heat treatment cycle |

On 1.3964 the practical ceiling is normally ingot availability rather than press
capacity, so size is confirmed against the drawing at enquiry.

## 09 Applications

Non-magnetizable seawater proof seamless rolled rings for German Navy vessels.
Non-magnetic components in mechanical and electrical engineering. Cryogenic
plant. Instrumentation and measurement hardware. High field scientific and
medical imaging structures. Pumps, valves and compressor components under
combined corrosive and mechanical loading.

## 10 Trade names

| Trade name | Supplier |
| --- | --- |
| Magnadur 3964 | Deutsche Edelstahlwerke Specialty Steel, Witten |
| P501, BOEHLER P501 | voestalpine High Performance Metals Deutschland |
| BGH 3964 | BGH Edelstahl Siegen |
| Irrubigo 3964 | Schmidt + Clemens, Edelstahlwerk Kaiserau |
| Remy 1.3964 WW | Remystahl, Hagen |
| Alloy 50 | Enpar Sonderwerkstoffe, Gummersbach |

Trade name listing per Stahlschluessel 2019.

## Quotation

Send the drawing or finished dimensions, the quantity, the governing standard or
WL sub-standard, the delivery condition and the NDT and certification level.
Forged weight, machining allowance, heat treatment and test scope are quoted
together.

Jiangyin Jiangnan Metal Co., Ltd.
No.1 Chengxiqiao Road, Zhouzhuang Town
Jiangyin City, Jiangsu Province, China
Tel +86 189 2135 9659
Email sales@steelforgepieces.com

## Questions

**Is X2CrNiMnMoNNb21-16-5-3 the same as Nitronic 50 or UNS S20910?**
No. 1.3964 carries nickel 15.0 to 17.0 and molybdenum 3.0 to 3.5 per cent.
S20910 carries nickel 11.5 to 13.5 and molybdenum 1.5 to 3.0 per cent and adds
vanadium. Carbon is 0.03 against 0.06 per cent. Separate specifications.

**At what temperature is 1.3964 solution annealed?**
1020 to 1050 C with rapid cooling in air or water.

**Does it stay non-magnetizable after machining?**
Yes in practical terms. Permeability is about 1.04, and below 1.01 for the
voestalpine equivalent, but it climbs with the degree of cold forming, so measure
after final machining on critical parts.

**What is the forging temperature range?**
Preheat 950 to 1150 C, forge 900 to 1100 C, cool rapidly afterwards.

**How well does it resist seawater?**
Pitting index 33.1 to 38.6 and a naval sub-standard for seawater proof rolled
rings. For severe hot stagnant chloride service a super-duplex or 6Mo grade is
the better choice.

**Can it be welded without post-weld heat treatment?**
Usually yes. Fillers 1.3954 and 1.3984.

**What sizes and lead times can be supplied?**
Up to 6,000 mm ring outside diameter and 30,000 kg single piece weight, minimum
order 10 kg, lead time 20 to 60 days.

## Related grades and sources

Nitronic 50 (S20910), X1CrNiMoCuN24-22-8 (1.4652), A182 F44 (254 SMO), 904L,
A182 F53 (2507), A286, 17-4PH, PH13-8Mo, Incoloy 925, Inconel 625.

Composition, mechanical and physical data, the pitting index, machining guideline
values and the hot working and solution annealing ranges follow the Deutsche
Edelstahlwerke and Swiss Steel Group datasheet for 1.3964, revision 3964-1.
Comparison against Alloy 50 follows voestalpine Specialty Metals product
information. Standard status, the BWB naval listing, intercrystalline corrosion
qualification and the trade name table follow the Applus Laboratories materials
record, which cites Stahlschluessel 2019. Figures are for reference and do not
replace the agreed order specification or the material test certificate issued
with the goods.

HTML version: http://www.steelforgepieces.com/Stainless-Steel/X2CrNiMnMoNNb21-16-5-3.html
Page reviewed 9 October 2026.
